On 03/15/2017 06:55 PM, Benjamin Block wrote:
> On Wed, Mar 15, 2017 at 02:54:09PM +0100, Hannes Reinecke wrote:
>> On 03/14/2017 06:33 PM, Benjamin Block wrote:
>>> Hello Hannes,
>>>
>>> On Wed, Mar 01, 2017 at 10:15:20AM +0100, Hannes Reinecke wrote:
>>>> There hasn't been any reports for HBAs where asynchronous abort
>>>> would not work, so we should make it mandatory and remove
>>>> the fallback.
>>>>
>>>> Signed-off-by: Hannes Reinecke <h...@suse.de>
>>>> Reviewed-by: Johannes Thumshirn <jthumsh...@suse.de>
>>>> Reviewed-by: Bart Van Assche <bart.vanass...@sandisk.com>
>>>> ---
>>>> Documentation/scsi/scsi_eh.txt | 18 ++++------
>>>> drivers/scsi/scsi_error.c | 81
>>>> ++++--------------------------------------
>>>> drivers/scsi/scsi_lib.c | 2 +-
>>>> drivers/scsi/scsi_priv.h | 3 +-
>>>> include/scsi/scsi_host.h | 5 ---
>>>> 5 files changed, 15 insertions(+), 94 deletions(-)
>>>>
>>>> diff --git a/Documentation/scsi/scsi_eh.txt
>>>> b/Documentation/scsi/scsi_eh.txt
>>>> index 4edb9c1c..11e447b 100644
>>>> --- a/Documentation/scsi/scsi_eh.txt
>>>> +++ b/Documentation/scsi/scsi_eh.txt
>>>> @@ -70,7 +70,7 @@ with the command.
>>>> scmd is requeued to blk queue.
>>>>
>>>> - otherwise
>>>> - scsi_eh_scmd_add(scmd, 0) is invoked for the command. See
>>>> + scsi_eh_scmd_add(scmd) is invoked for the command. See
>>>> [1-3] for details of this function.
>>>>
>>>>
>>>> @@ -103,9 +103,7 @@ function
>>>> eh_timed_out() callback did not handle the command.
>>>> Step #2 is taken.
>>>>
>>>> - 2. If the host supports asynchronous completion (as indicated by the
>>>> - no_async_abort setting in the host template) scsi_abort_command()
>>>> - is invoked to schedule an asynchrous abort.
>>>> + 2. scsi_abort_command() is invoked to schedule an asynchrous abort.
>>>> Asynchronous abort are not invoked for commands which the
>>>> SCSI_EH_ABORT_SCHEDULED flag is set (this indicates that the command
>>>> already had been aborted once, and this is a retry which failed),
>>>> @@ -127,16 +125,13 @@ function
>>>>
>>>> scmds enter EH via scsi_eh_scmd_add(), which does the following.
>>>>
>>>> - 1. Turns on scmd->eh_eflags as requested. It's 0 for error
>>>> - completions and SCSI_EH_CANCEL_CMD for timeouts.
>>>> + 1. Links scmd->eh_entry to shost->eh_cmd_q
>>>>
>>>> - 2. Links scmd->eh_entry to shost->eh_cmd_q
>>>> + 2. Sets SHOST_RECOVERY bit in shost->shost_state
>>>>
>>>> - 3. Sets SHOST_RECOVERY bit in shost->shost_state
>>>> + 3. Increments shost->host_failed
>>>>
>>>> - 4. Increments shost->host_failed
>>>> -
>>>> - 5. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed
>>>> + 4. Wakes up SCSI EH thread if shost->host_busy == shost->host_failed
>>>>
>>>> As can be seen above, once any scmd is added to shost->eh_cmd_q,
>>>> SHOST_RECOVERY shost_state bit is turned on. This prevents any new
>>>> @@ -252,7 +247,6 @@ scmd->allowed.
>>>>
>>>> 1. Error completion / time out
>>>> ACTION: scsi_eh_scmd_add() is invoked for scmd
>>>> - - set scmd->eh_eflags
>>>> - add scmd to shost->eh_cmd_q
>>>> - set SHOST_RECOVERY
>>>> - shost->host_failed++
>>>> diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
>>>> index 802a081..7b70ee9 100644
>>>> --- a/drivers/scsi/scsi_error.c
>>>> +++ b/drivers/scsi/scsi_error.c
>>>> @@ -163,7 +163,7 @@ static int scsi_host_eh_past_deadline(struct Scsi_Host
>>>> *shost)
>>>> }
>>>> }
>>>>
>>>> - scsi_eh_scmd_add(scmd, 0);
>>>> + scsi_eh_scmd_add(scmd);
>>>> }
>>>>
>>>> /**
>>>> @@ -217,9 +217,8 @@ static int scsi_host_eh_past_deadline(struct Scsi_Host
>>>> *shost)
>>>> /**
>>>> * scsi_eh_scmd_add - add scsi cmd to error handling.
>>>> * @scmd: scmd to run eh on.
>>>> - * @eh_flag: optional SCSI_EH flag.
>>>> */
>>>> -void scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
>>>> +void scsi_eh_scmd_add(struct scsi_cmnd *scmd)
>>>> {
>>>> struct Scsi_Host *shost = scmd->device->host;
>>>> unsigned long flags;
>>>> @@ -235,9 +234,6 @@ void scsi_eh_scmd_add(struct scsi_cmnd *scmd, int
>>>> eh_flag)
>>>> if (shost->eh_deadline != -1 && !shost->last_reset)
>>>> shost->last_reset = jiffies;
>>>>
>>>> - if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
>>>> - eh_flag &= ~SCSI_EH_CANCEL_CMD;
>>>> - scmd->eh_eflags |= eh_flag;
>>>> scsi_eh_reset(scmd);
>>>> list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
>>>> shost->host_failed++;
>>>> @@ -271,10 +267,9 @@ enum blk_eh_timer_return scsi_times_out(struct
>>>> request *req)
>>>> rtn = host->hostt->eh_timed_out(scmd);
>>>>
>>>> if (rtn == BLK_EH_NOT_HANDLED) {
>>>> - if (host->hostt->no_async_abort ||
>>>> - scsi_abort_command(scmd) != SUCCESS) {
>>>> + if (scsi_abort_command(scmd) != SUCCESS) {
>>>> set_host_byte(scmd, DID_TIME_OUT);
>>>> - scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD);
>>>> + scsi_eh_scmd_add(scmd);
>>>> }
>>>> }
>>>>
>>>> @@ -327,7 +322,7 @@ static inline void scsi_eh_prt_fail_stats(struct
>>>> Scsi_Host *shost,
>>>> list_for_each_entry(scmd, work_q, eh_entry) {
>>>> if (scmd->device == sdev) {
>>>> ++total_failures;
>>>> - if (scmd->eh_eflags & SCSI_EH_CANCEL_CMD)
>>>> + if (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED)
>>>> ++cmd_cancel;
>>>> else
>>>> ++cmd_failed;
>>>> @@ -1153,8 +1148,7 @@ int scsi_eh_get_sense(struct list_head *work_q,
>>>> * should not get sense.
>>>> */
>>>> list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
>>>> - if ((scmd->eh_eflags & SCSI_EH_CANCEL_CMD) ||
>>>> - (scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
>>>> + if ((scmd->eh_eflags & SCSI_EH_ABORT_SCHEDULED) ||
>>>> SCSI_SENSE_VALID(scmd))
>>>> continue;
>>>>
>>>> @@ -1294,61 +1288,6 @@ static int scsi_eh_test_devices(struct list_head
>>>> *cmd_list,
>>>> return list_empty(work_q);
>>>> }
>>>>
>>>> -
>>>> -/**
>>>> - * scsi_eh_abort_cmds - abort pending commands.
>>>> - * @work_q: &list_head for pending commands.
>>>> - * @done_q: &list_head for processed commands.
>>>> - *
>>>> - * Decription:
>>>> - * Try and see whether or not it makes sense to try and abort the
>>>> - * running command. This only works out to be the case if we have one
>>>> - * command that has timed out. If the command simply failed, it makes
>>>> - * no sense to try and abort the command, since as far as the shost
>>>> - * adapter is concerned, it isn't running.
>>>> - */
>>>> -static int scsi_eh_abort_cmds(struct list_head *work_q,
>>>> - struct list_head *done_q)
>>>> -{
>>>> - struct scsi_cmnd *scmd, *next;
>>>> - LIST_HEAD(check_list);
>>>> - int rtn;
>>>> - struct Scsi_Host *shost;
>>>> -
>>>> - list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
>>>> - if (!(scmd->eh_eflags & SCSI_EH_CANCEL_CMD))
>>>> - continue;
>>>> - shost = scmd->device->host;
>>>> - if (scsi_host_eh_past_deadline(shost)) {
>>>> - list_splice_init(&check_list, work_q);
>>>> - SCSI_LOG_ERROR_RECOVERY(3,
>>>> - scmd_printk(KERN_INFO, scmd,
>>>> - "%s: skip aborting cmd, past eh
>>>> deadline\n",
>>>> - current->comm));
>>>> - return list_empty(work_q);
>>>> - }
>>>> - SCSI_LOG_ERROR_RECOVERY(3,
>>>> - scmd_printk(KERN_INFO, scmd,
>>>> - "%s: aborting cmd\n", current->comm));
>>>> - rtn = scsi_try_to_abort_cmd(shost->hostt, scmd);
>>>> - if (rtn == FAILED) {
>>>> - SCSI_LOG_ERROR_RECOVERY(3,
>>>> - scmd_printk(KERN_INFO, scmd,
>>>> - "%s: aborting cmd failed\n",
>>>> - current->comm));
>>>> - list_splice_init(&check_list, work_q);
>>>> - return list_empty(work_q);
>>>> - }
>>>> - scmd->eh_eflags &= ~SCSI_EH_CANCEL_CMD;
>>>> - if (rtn == FAST_IO_FAIL)
>>>> - scsi_eh_finish_cmd(scmd, done_q);
>>>> - else
>>>> - list_move_tail(&scmd->eh_entry, &check_list);
>>>> - }
>>>> -
>>>> - return scsi_eh_test_devices(&check_list, work_q, done_q, 0);
>>>> -}
>>>> -
>>>> /**
>>>> * scsi_eh_try_stu - Send START_UNIT to device.
>>>> * @scmd: &scsi_cmnd to send START_UNIT
>>>> @@ -1691,11 +1630,6 @@ static void scsi_eh_offline_sdevs(struct list_head
>>>> *work_q,
>>>> sdev_printk(KERN_INFO, scmd->device, "Device offlined - "
>>>> "not ready after error recovery\n");
>>>> scsi_device_set_state(scmd->device, SDEV_OFFLINE);
>>>> - if (scmd->eh_eflags & SCSI_EH_CANCEL_CMD) {
>>>> - /*
>>>> - * FIXME: Handle lost cmds.
>>>> - */
>>>> - }
>>>> scsi_eh_finish_cmd(scmd, done_q);
>>>> }
>>>> return;
>>>> @@ -2139,8 +2073,7 @@ static void scsi_unjam_host(struct Scsi_Host *shost)
>>>> SCSI_LOG_ERROR_RECOVERY(1, scsi_eh_prt_fail_stats(shost, &eh_work_q));
>>>>
>>>> if (!scsi_eh_get_sense(&eh_work_q, &eh_done_q))
>>>> - if (!scsi_eh_abort_cmds(&eh_work_q, &eh_done_q))
>>>> - scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
>>>> + scsi_eh_ready_devs(shost, &eh_work_q, &eh_done_q);
>>>>
>>>> spin_lock_irqsave(shost->host_lock, flags);
>>>> if (shost->eh_deadline != -1)
>>>> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
>>>> index 0735a46..98b2df8 100644
>>>> --- a/drivers/scsi/scsi_lib.c
>>>> +++ b/drivers/scsi/scsi_lib.c
>>>> @@ -1593,7 +1593,7 @@ static void scsi_softirq_done(struct request *rq)
>>>> scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
>>>> break;
>>>> default:
>>>> - scsi_eh_scmd_add(cmd, 0);
>>>> + scsi_eh_scmd_add(cmd);
>>>> break;
>>>> }
>>>> }
>>>> diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
>>>> index 5be6cbf6..e20ab10 100644
>>>> --- a/drivers/scsi/scsi_priv.h
>>>> +++ b/drivers/scsi/scsi_priv.h
>>>> @@ -18,7 +18,6 @@
>>>> /*
>>>> * Scsi Error Handler Flags
>>>> */
>>>> -#define SCSI_EH_CANCEL_CMD 0x0001 /* Cancel this cmd */
>>>> #define SCSI_EH_ABORT_SCHEDULED 0x0002 /* Abort has been scheduled */
>>>>
>>>> #define SCSI_SENSE_VALID(scmd) \
>>>> @@ -72,7 +71,7 @@ extern int scsi_dev_info_list_add_keyed(int compatible,
>>>> char *vendor,
>>>> extern int scsi_error_handler(void *host);
>>>> extern int scsi_decide_disposition(struct scsi_cmnd *cmd);
>>>> extern void scsi_eh_wakeup(struct Scsi_Host *shost);
>>>> -extern void scsi_eh_scmd_add(struct scsi_cmnd *, int);
>>>> +extern void scsi_eh_scmd_add(struct scsi_cmnd *);
>>>> void scsi_eh_ready_devs(struct Scsi_Host *shost,
>>>> struct list_head *work_q,
>>>> struct list_head *done_q);
>>>> diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
>>>> index 3cd8c3b..afb0481 100644
>>>> --- a/include/scsi/scsi_host.h
>>>> +++ b/include/scsi/scsi_host.h
>>>> @@ -452,11 +452,6 @@ struct scsi_host_template {
>>>> unsigned no_write_same:1;
>>>>
>>>> /*
>>>> - * True if asynchronous aborts are not supported
>>>> - */
>>>> - unsigned no_async_abort:1;
>>>> -
>>>> - /*
>>>> * Countdown for host blocking with no commands outstanding.
>>>> */
>>>> unsigned int max_host_blocked;
>>>> --
>>>> 1.8.5.6
>>>>
>>>
>>> Hmm so, I guess we compromise in terms of how granular we want to
>>> recover?
>>>
>>> When say an abort for command A on LUN 1 behind Port α fails for some
>>> reason, then we also skip all possible aborts for command B on LUN 2
>>> behind Port α and command C on LUN 1 behind Port β? (The host might
>>> already be in recovery by the time command B and C fail)
>>>
>> No.
>> Recovery will only be started once all commands have been completed or
>> aborted.
>> Hence will be be aborting all commands before entering SCSI EH.
>>
>
> When you call scsi_abort_command() after a timeout happend, it will
> check with scsi_host_in_recovery() whether the host has recovery already
> set or not. And only if not it will schedule the abort.
>
Ah. Umm.
Yes, you are right...
> When the first command A times out, it will schedule a async abort, and
> if that fails it will set the state of the host in scsi_eh_scmd_add() to
> SHOST_RECOVERY before even the EH thread is kicked. So if command B and
> C timeout later than that, there won't be any abort scheduled.
>
> That is with state tag v4.10, and your patchset. And I have actually
> observed this behavior in real life already (granted, the timeouts
> happened after injects), with the difference that previously the abort
> would still happen in the EH handling.
>
Hmm. Okay. But then we should _not_ be checking if the host is in
recovery when sending aborts, but rather trying to do an abort anyway.
We only need to terminate/not send aborts if eh_deadline has triggered,
as then we're doing a host reset and aborts are meaningless anyway.
Will be updating the patchset.
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
h...@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
