Hi Chang, > On Jan 18, 2018, at 4:51 AM, Changlimin <changli...@h3c.com> wrote: > > Hi Himanshu， > Today I reproduced the issue in my server. > First, I compiled kernel 4.15-rc6 (make localmodconfig; make; make > modules_install; make install), then start the kernel with parameter > modprobe.blacklist=qla2xxx. > Second, tail -f /var/log/syslog > Third, modprobe qla2xxx ql2xextended_error_logging=0x1e400000 , the log is > syslog-1e400000.txt > The syslog-7fffffff is got when modprobe qla2xxx > ql2xextended_error_logging=0x7fffffff > > BTW, I haven't load driver from 4.9.x to kernel 4.15-rc6. > When I checkout kernel commit 726b85487067d7f5b23495bc33c484b8517c4074, all > kernel code is 4.9.x. >
Sorry for extended delay in the response. From the syslog that you sent me, I do see driver version 10.00.00.02-k which is from 4.15.0-rc6 so atleast you are using the correct driver. (in your email earlier you mentioned 8.07.xx which was confusing) Jan 18 20:30:23 cvknode25 kernel: [ 100.991309] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.02-k-debug. Jan 18 20:30:23 cvknode25 kernel: [ 100.991486] qla2xxx [0000:0a:00.0]-001d: : Found an ISP2532 irq 16 iobase 0x0000000067aad9fd. Jan 18 20:30:23 cvknode25 kernel: [ 101.651676] qla2xxx [0000:0a:00.0]-4800:1: DPC handler sleeping. Jan 18 20:30:23 cvknode25 kernel: [ 101.651677] scsi host1: qla2xxx Also I do see Jan 18 20:30:24 cvknode25 kernel: [ 102.624987] qla2xxx [0000:0a:00.0]-500a:1: LOOP UP detected (8 Gbps). i.e. driver was able to bring up 8G link So having said that i still do not have clear picture from the logs provided, why you are encountering issue. Can you please share you configuration details. I would like to see how is your system setup and see if i can replicate in our lab here. > Regards > Chang Limin > > -----Original Message----- > From: Madhani, Himanshu [mailto:himanshu.madh...@cavium.com] > Sent: Thursday, January 18, 2018 2:26 AM > To: changlimin (Cloud) > Cc: Nicholas A. Bellinger; Tran, Quinn; jifuliang (Cloud); zhangguanghui > (Cloud); zhangzijian (Cloud); target-devel; linux-scsi > Subject: Re: A qla2xxx commit cause Linux no response, has not fixed in > lastest version 4.15-rc6 > > Hi Chang, > >> On Jan 15, 2018, at 10:49 PM, Changlimin <changli...@h3c.com> wrote: >> >> Hi Himanshu, >> This is my progress. >> First, I compiled 4.15-rc6, I found linux hang when booting, the stack >> showed something wrong in qla2xxx driver. > > Can you provide me detail steps of how you compiled 4.15-rc6. Also provide me > details of how you are loading driver and also provide complete log file. > > I do not see how you will be able to load driver which is from 4.9.x when you > compile fresh 4.15.0-rc6. > > Just FYI, I build test system with 8G/16G/32G adapter with 4.15.0-rc6 kernel > and I am not able to see hang that you are describing. > > # uname -r > 4.15.0-rc6+ > > # modprobe qla2xxx > > # fcc.sh > FC HBAs: > HBA Port Name Port ID State Device > host3 21:00:00:24:ff:7e:f5:80 01:0d:00 Online QLE2742 FW:v8.05.63 > DVR:v10.00.00.04-k > host4 21:00:00:24:ff:7e:f5:81 01:0e:00 Online QLE2742 FW:v8.05.63 > DVR:v10.00.00.04-k > host5 21:00:00:0e:1e:12:e9:a0 01:06:00 Online QLE8362 FW:v8.03.06 > DVR:v10.00.00.04-k > host6 21:00:00:0e:1e:12:e9:a1 01:14:00 Online QLE8362 FW:v8.03.06 > DVR:v10.00.00.04-k > host7 21:00:00:24:ff:46:0a:5c 01:0d:00 Online QLE2562 FW:v8.03.00 > DVR:v10.00.00.04-k > host8 21:00:00:24:ff:46:0a:5d 01:15:00 Online QLE2562 FW:v8.03.00 > DVR:v10.00.00.04-k > > # modinfo qla2xxx | more > > filename: > /lib/modules/4.15.0-rc6+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko > firmware: ql2500_fw.bin > firmware: ql2400_fw.bin > firmware: ql2322_fw.bin > firmware: ql2300_fw.bin > firmware: ql2200_fw.bin > firmware: ql2100_fw.bin > version: 10.00.00.04-k > license: GPL > description: QLogic Fibre Channel HBA Driver > author: QLogic Corporation > srcversion: 6CBCF1372A7756690E83CC3 > > >> Second, I want to find which commit introduced the issue. So I tried many >> times via git bisect to linux kernel. >> Finally, I found the commit 726b85487067d7f5b23495bc33c484b8517c4074 >> introduced the issue. The attached log is related to this commit. >> Also ubuntu kernel has this issue: >> >> https://launchpad.net/ubuntu/+archive/primary/+files/linux-image-4.13. >> 0-25-generic_4.13.0-25.29_amd64.deb >> >> https://launchpad.net/ubuntu/+archive/primary/+files/linux-image-extra >> -4.13.0-25-generic_4.13.0-25.29_amd64.deb >> >> Regards >> Chang Limin >> >> -----Original Message----- >> From: Madhani, Himanshu [mailto:himanshu.madh...@cavium.com] >> Sent: Tuesday, January 16, 2018 12:59 PM >> To: changlimin (Cloud) >> Cc: Nicholas A. Bellinger; Tran, Quinn; jifuliang (Cloud); >> zhangguanghui (Cloud); zhangzijian (Cloud); target-devel; linux-scsi >> Subject: Re: A qla2xxx commit cause Linux no response, has not fixed >> in lastest version 4.15-rc6 >> >> Hi Chang, >> >>> On Jan 15, 2018, at 4:27 PM, Changlimin <changli...@h3c.com> wrote: >>> >>> Hi Himanshu, >>> The issue is: When insmod the qla2xxx.ko from 4.15-rc6, linux hang. >> >> From the log file attached. I see that you are trying to load driver from >> 4.9.x in 4.15.0-rc6. >> >> [ 279.898704] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA >> Driver: 8.07.00.38-k-debug. >> >> 4.15.0-rc6 had driver version 10.00.00.02-k. Would you check if you have all >> the driver changes pulled in with kernel 4.15.0-rc6. >> >>> I have git bisect the commits. >>> The issue was introduced in commit: >>> 726b85487067d7f5b23495bc33c484b8517c4074 qla2xxx: Add framework for async >>> fabric discovery. >>> The previous commit is good: 5d964837c6a743193c63c8912f98834c7457ba5c >>> qla2xxx: Track I-T nexus as single fc_port struct . >>> >>> Regards >>> Chang Limin >>> >>> -----Original Message----- >>> From: Madhani, Himanshu [mailto:himanshu.madh...@cavium.com] >>> Sent: Tuesday, January 16, 2018 12:58 AM >>> To: Nicholas A. Bellinger >>> Cc: changlimin (Cloud); Tran, Quinn; jifuliang (Cloud); zhangguanghui >>> (Cloud); zhangzijian (Cloud); target-devel; linux-scsi >>> Subject: Re: A qla2xxx commit cause Linux no response, has not fixed >>> in lastest version 4.15-rc6 >>> >>> Hi Nic, Chang, >>> >>>> On Jan 12, 2018, at 9:28 PM, Nicholas A. Bellinger <n...@linux-iscsi.org> >>>> wrote: >>>> >>>> Hi Chang & Co, >>>> >>>> (Adding list + Himanshu CC') >>>> >>>> On Sun, 2018-01-07 at 10:21 +0000, Changlimin wrote: >>>>> Hi, >>>>> It seems the qla2xxx commit cause Linux no response, has not fixed in >>>>> lastest version 4.15-rc6. >>>>> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable. >>>>> g >>>>> it/commit/?id=726b85487067d7f5b23495bc33c484b8517c4074 >>>>> >>>> >>>> Thanks for reporting + including debug log. :) >>>> >>>>> lspci: >>>>> 0a:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel >>>>> to PCI Express HBA (rev 02) >>>>> 0a:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel >>>>> to PCI Express HBA (rev 02) >>>>> >>>>> syslog: >>>>> qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: >>>>> 8.07.00.38-k. >>>>> qla2xxx [0000:0a:00.0]-001a: : MSI-X vector count: 32. >>>>> qla2xxx [0000:0a:00.0]-001d: : Found an ISP2532 irq 16 iobase >>>>> 0xffffb0d5cc501000. >>>>> qla2xxx [0000:0a:00.0]-00c6:1: MSI-X: Failed to enable support with 32 >>>>> vectors, using 26 vectors. >>>>> scsi host1: qla2xxx >>>>> qla2xxx [0000:0a:00.0]-00fb:1: QLogic HPAJ764A - HP 8Gb Dual Channel >>>>> PCI-e 2.0 FC HBA. >>>>> qla2xxx [0000:0a:00.0]-00fc:1: ISP2532: PCIe (5.0GT/s x8) @ 0000:0a:00.0 >>>>> hdma+ host#=1 fw=8.03.00 (90d5). >>>>> qla2xxx [0000:0a:00.1]-001a: : MSI-X vector count: 32. >>>>> qla2xxx [0000:0a:00.1]-001d: : Found an ISP2532 irq 17 iobase >>>>> 0xffffb0d5cc5d9000. >>>>> qla2xxx [0000:0a:00.1]-00c6:2: MSI-X: Failed to enable support with 32 >>>>> vectors, using 26 vectors. >>>>> scsi host2: qla2xxx >>>>> qla2xxx [0000:0a:00.1]-00fb:2: QLogic HPAJ764A - HP 8Gb Dual Channel >>>>> PCI-e 2.0 FC HBA. >>>>> qla2xxx [0000:0a:00.1]-00fc:2: ISP2532: PCIe (5.0GT/s x8) @ 0000:0a:00.1 >>>>> hdma+ host#=2 fw=8.03.00 (90d5). >>>>> qla2xxx [0000:0a:00.0]-500a:1: LOOP UP detected (8 Gbps). >>>>> qla2xxx [0000:0a:00.1]-500a:2: LOOP UP detected (8 Gbps). >>>>> >>>>> The attached file is the module log. >>>>> >>>>> Do you have any advice? >>>> >>>> Quinn & Himanshu folks, any comments..? >>>> >>> >>> What is the issue here? I am not clear form the snippet above. >>> >>> One thing I noticed that, if you are using 4.15-rc6 driver version >>> should be 10.00.00.02-k but the snippet shows 8.07.00.38-k which >>> tells me you might >>> >>> Thanks, >>> - Himanshu >>> <qla2xxx-full.log.gz> >> >> Thanks, >> - Himanshu >> > > Thanks, > - Himanshu > Thanks, - Himanshu
