Currently, the FW logging facility is a load/boot time parameter
which requires the driver to be unloaded/reloaded or the system
rebooted in order to change it's configuration.
Convert the logging facility to allow dynamic enablement and
configuration. Specifically:
- Convert the feature so that it can be enabled dynamically via an
attribute. Additionally, the size of the buffer can be configured
dynamically.
- Add locks around states that now may be changing.
- Tie the feature into debugfs so that the logs can be read at
any time.
Signed-off-by: Dick Kennedy <dick.kenn...@broadcom.com>
Signed-off-by: James Smart <jsmart2...@gmail.com>
---
drivers/scsi/lpfc/lpfc.h | 9 ++-
drivers/scsi/lpfc/lpfc_attr.c | 48 +++++++++++++++-
drivers/scsi/lpfc/lpfc_bsg.c | 18 ++++--
drivers/scsi/lpfc/lpfc_debugfs.c | 117 ++++++++++++++++++++++++++++++++++++++-
drivers/scsi/lpfc/lpfc_sli.c | 22 +++++++-
5 files changed, 204 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index dabb5eac5fed..884d6076d7aa 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -605,6 +605,12 @@ struct lpfc_epd_pool {
spinlock_t lock; /* lock for expedite pool */
};
+enum ras_state {
+ INACTIVE,
+ REG_INPROGRESS,
+ ACTIVE
+};
+
struct lpfc_ras_fwlog {
uint8_t *fwlog_buff;
uint32_t fw_buffcount; /* Buffer size posted to FW */
@@ -621,7 +627,7 @@ struct lpfc_ras_fwlog {
bool ras_enabled; /* Ras Enabled for the function */
#define LPFC_RAS_DISABLE_LOGGING 0x00
#define LPFC_RAS_ENABLE_LOGGING 0x01
- bool ras_active; /* RAS logging running state */
+ enum ras_state state; /* RAS logging running state */
};
struct lpfc_hba {
@@ -1053,6 +1059,7 @@ struct lpfc_hba {
#ifdef LPFC_HDWQ_LOCK_STAT
struct dentry *debug_lockstat;
#endif
+ struct dentry *debug_ras_log;
atomic_t nvmeio_trc_cnt;
uint32_t nvmeio_trc_size;
uint32_t nvmeio_trc_output_idx;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 266a71b01c47..ba504cc6e8ed 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -5932,7 +5932,53 @@ LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS
Diagnostics");
* [1-4] = Multiple of 1/4th Mb of host memory for FW logging
* Value range [0..4]. Default value is 0
*/
-LPFC_ATTR_RW(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");
+LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");
+lpfc_param_show(ras_fwlog_buffsize);
+
+static ssize_t
+lpfc_ras_fwlog_buffsize_set(struct lpfc_hba *phba, uint val)
+{
+ int ret = 0;
+ enum ras_state state;
+
+ if (!lpfc_rangecheck(val, 0, 4))
+ return -EINVAL;
+
+ if (phba->cfg_ras_fwlog_buffsize == val)
+ return 0;
+
+ if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn))
+ return -EINVAL;
+
+ spin_lock_irq(&phba->hbalock);
+ state = phba->ras_fwlog.state;
+ spin_unlock_irq(&phba->hbalock);
+
+ if (state == REG_INPROGRESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging "
+ "registration is in progress\n");
+ return -EBUSY;
+ }
+
+ /* For disable logging: stop the logs and free the DMA.
+ * For ras_fwlog_buffsize size change we still need to free and
+ * reallocate the DMA in lpfc_sli4_ras_fwlog_init.
+ */
+ phba->cfg_ras_fwlog_buffsize = val;
+ if (state == ACTIVE) {
+ lpfc_ras_stop_fwlog(phba);
+ lpfc_sli4_ras_dma_free(phba);
+ }
+
+ lpfc_sli4_ras_init(phba);
+ if (phba->ras_fwlog.ras_enabled)
+ ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level,
+ LPFC_RAS_ENABLE_LOGGING);
+ return ret;
+}
+
+lpfc_param_store(ras_fwlog_buffsize);
+static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize);
/*
* lpfc_ras_fwlog_level: Firmware logging verbosity level
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 39a736b887b1..d4e1b120cc9e 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -5435,10 +5435,12 @@ lpfc_bsg_get_ras_config(struct bsg_job *job)
bsg_reply->reply_data.vendor_reply.vendor_rsp;
/* Current logging state */
- if (ras_fwlog->ras_active == true)
+ spin_lock_irq(&phba->hbalock);
+ if (ras_fwlog->state == ACTIVE)
ras_reply->state = LPFC_RASLOG_STATE_RUNNING;
else
ras_reply->state = LPFC_RASLOG_STATE_STOPPED;
+ spin_unlock_irq(&phba->hbalock);
ras_reply->log_level = phba->ras_fwlog.fw_loglevel;
ras_reply->log_buff_sz = phba->cfg_ras_fwlog_buffsize;
@@ -5495,10 +5497,13 @@ lpfc_bsg_set_ras_config(struct bsg_job *job)
if (action == LPFC_RASACTION_STOP_LOGGING) {
/* Check if already disabled */
- if (ras_fwlog->ras_active == false) {
+ spin_lock_irq(&phba->hbalock);
+ if (ras_fwlog->state != ACTIVE) {
+ spin_unlock_irq(&phba->hbalock);
rc = -ESRCH;
goto ras_job_error;
}
+ spin_unlock_irq(&phba->hbalock);
/* Disable logging */
lpfc_ras_stop_fwlog(phba);
@@ -5509,8 +5514,10 @@ lpfc_bsg_set_ras_config(struct bsg_job *job)
* FW-logging with new log-level. Return status
* "Logging already Running" to caller.
**/
- if (ras_fwlog->ras_active)
+ spin_lock_irq(&phba->hbalock);
+ if (ras_fwlog->state != INACTIVE)
action_status = -EINPROGRESS;
+ spin_unlock_irq(&phba->hbalock);
/* Enable logging */
rc = lpfc_sli4_ras_fwlog_init(phba, log_level,
@@ -5626,10 +5633,13 @@ lpfc_bsg_get_ras_fwlog(struct bsg_job *job)
goto ras_job_error;
/* Logging to be stopped before reading */
- if (ras_fwlog->ras_active == true) {
+ spin_lock_irq(&phba->hbalock);
+ if (ras_fwlog->state == ACTIVE) {
+ spin_unlock_irq(&phba->hbalock);
rc = -EINPROGRESS;
goto ras_job_error;
}
+ spin_unlock_irq(&phba->hbalock);
if (job->request_len <
sizeof(struct fc_bsg_request) +
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 8d34be60d379..ab124f7d50d6 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -2078,6 +2078,96 @@ lpfc_debugfs_lockstat_write(struct file *file, const
char __user *buf,
}
#endif
+int
+lpfc_debugfs_ras_log_data(struct lpfc_hba *phba, char *buffer, int size)
+{
+ int copied = 0;
+ struct lpfc_dmabuf *dmabuf, *next;
+
+ spin_lock_irq(&phba->hbalock);
+ if (phba->ras_fwlog.state != ACTIVE) {
+ spin_unlock_irq(&phba->hbalock);
+ return -EINVAL;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(dmabuf, next,
+ &phba->ras_fwlog.fwlog_buff_list, list) {
+ memcpy(buffer + copied, dmabuf->virt, LPFC_RAS_MAX_ENTRY_SIZE);
+ copied += LPFC_RAS_MAX_ENTRY_SIZE;
+ if (size > copied)
+ break;
+ }
+ return copied;
+}
+
+static int
+lpfc_debugfs_ras_log_release(struct inode *inode, struct file *file)
+{
+ struct lpfc_debug *debug = file->private_data;
+
+ vfree(debug->buffer);
+ kfree(debug);
+
+ return 0;
+}
+
+/**
+ * lpfc_debugfs_ras_log_open - Open the RAS log debugfs buffer
+ * @inode: The inode pointer that contains a vport pointer.
+ * @file: The file pointer to attach the log output.
+ *
+ * Description:
+ * This routine is the entry point for the debugfs open file operation. It gets
+ * the vport from the i_private field in @inode, allocates the necessary buffer
+ * for the log, fills the buffer from the in-memory log for this vport, and
then
+ * returns a pointer to that log in the private_data field in @file.
+ *
+ * Returns:
+ * This function returns zero if successful. On error it will return a negative
+ * error value.
+ **/
+static int
+lpfc_debugfs_ras_log_open(struct inode *inode, struct file *file)
+{
+ struct lpfc_hba *phba = inode->i_private;
+ struct lpfc_debug *debug;
+ int size;
+ int rc = -ENOMEM;
+
+ spin_lock_irq(&phba->hbalock);
+ if (phba->ras_fwlog.state != ACTIVE) {
+ spin_unlock_irq(&phba->hbalock);
+ rc = -EINVAL;
+ goto out;
+ }
+ spin_unlock_irq(&phba->hbalock);
+ debug = kmalloc(sizeof(*debug), GFP_KERNEL);
+ if (!debug)
+ goto out;
+
+ size = LPFC_RAS_MIN_BUFF_POST_SIZE * phba->cfg_ras_fwlog_buffsize;
+ debug->buffer = vmalloc(size);
+ if (!debug->buffer)
+ goto free_debug;
+
+ debug->len = lpfc_debugfs_ras_log_data(phba, debug->buffer, size);
+ if (debug->len < 0) {
+ rc = -EINVAL;
+ goto free_buffer;
+ }
+ file->private_data = debug;
+
+ return 0;
+
+free_buffer:
+ vfree(debug->buffer);
+free_debug:
+ kfree(debug);
+out:
+ return rc;
+}
+
/**
* lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
@@ -5286,6 +5376,16 @@ static const struct file_operations
lpfc_debugfs_op_lockstat = {
};
#endif
+#undef lpfc_debugfs_ras_log
+static const struct file_operations lpfc_debugfs_ras_log = {
+ .owner = THIS_MODULE,
+ .open = lpfc_debugfs_ras_log_open,
+ .llseek = lpfc_debugfs_lseek,
+ .read = lpfc_debugfs_read,
+ .release = lpfc_debugfs_ras_log_release,
+};
+#endif
+
#undef lpfc_debugfs_op_dumpHBASlim
static const struct file_operations lpfc_debugfs_op_dumpHBASlim = {
.owner = THIS_MODULE,
@@ -5457,7 +5557,6 @@ static const struct file_operations lpfc_idiag_op_extAcc
= {
.release = lpfc_idiag_cmd_release,
};
-#endif
/* lpfc_idiag_mbxacc_dump_bsg_mbox - idiag debugfs dump bsg mailbox command
* @phba: Pointer to HBA context object.
@@ -5707,6 +5806,19 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
goto debug_failed;
}
+ /* RAS log */
+ snprintf(name, sizeof(name), "ras_log");
+ phba->debug_ras_log =
+ debugfs_create_file(name, 0644,
+ phba->hba_debugfs_root,
+ phba, &lpfc_debugfs_ras_log);
+ if (!phba->debug_ras_log) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+ "6148 Cannot create debugfs"
+ " ras_log\n");
+ goto debug_failed;
+ }
+
/* Setup hbqinfo */
snprintf(name, sizeof(name), "hbqinfo");
phba->debug_hbqinfo =
@@ -6117,6 +6229,9 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
debugfs_remove(phba->debug_hbqinfo); /* hbqinfo */
phba->debug_hbqinfo = NULL;
+ debugfs_remove(phba->debug_ras_log);
+ phba->debug_ras_log = NULL;
+
#ifdef LPFC_HDWQ_LOCK_STAT
debugfs_remove(phba->debug_lockstat); /* lockstat */
phba->debug_lockstat = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0e6674bd15c6..294f041961a8 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -6219,11 +6219,16 @@ lpfc_ras_stop_fwlog(struct lpfc_hba *phba)
{
struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
- ras_fwlog->ras_active = false;
+ spin_lock_irq(&phba->hbalock);
+ ras_fwlog->state = INACTIVE;
+ spin_unlock_irq(&phba->hbalock);
/* Disable FW logging to host memory */
writel(LPFC_CTL_PDEV_CTL_DDL_RAS,
phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
+
+ /* Wait 10ms for firmware to stop using DMA buffer */
+ usleep_range(10 * 1000, 20 * 1000);
}
/**
@@ -6259,7 +6264,9 @@ lpfc_sli4_ras_dma_free(struct lpfc_hba *phba)
ras_fwlog->lwpd.virt = NULL;
}
- ras_fwlog->ras_active = false;
+ spin_lock_irq(&phba->hbalock);
+ ras_fwlog->state = INACTIVE;
+ spin_unlock_irq(&phba->hbalock);
}
/**
@@ -6361,7 +6368,9 @@ lpfc_sli4_ras_mbox_cmpl(struct lpfc_hba *phba,
LPFC_MBOXQ_t *pmb)
goto disable_ras;
}
- ras_fwlog->ras_active = true;
+ spin_lock_irq(&phba->hbalock);
+ ras_fwlog->state = ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
mempool_free(pmb, phba->mbox_mem_pool);
return;
@@ -6393,6 +6402,10 @@ lpfc_sli4_ras_fwlog_init(struct lpfc_hba *phba,
uint32_t len = 0, fwlog_buffsize, fwlog_entry_count;
int rc = 0;
+ spin_lock_irq(&phba->hbalock);
+ ras_fwlog->state = INACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
fwlog_buffsize = (LPFC_RAS_MIN_BUFF_POST_SIZE *
phba->cfg_ras_fwlog_buffsize);
fwlog_entry_count = (fwlog_buffsize/LPFC_RAS_MAX_ENTRY_SIZE);
@@ -6452,6 +6465,9 @@ lpfc_sli4_ras_fwlog_init(struct lpfc_hba *phba,
mbx_fwlog->u.request.lwpd.addr_lo = putPaddrLow(ras_fwlog->lwpd.phys);
mbx_fwlog->u.request.lwpd.addr_hi = putPaddrHigh(ras_fwlog->lwpd.phys);
+ spin_lock_irq(&phba->hbalock);
+ ras_fwlog->state = REG_INPROGRESS;
+ spin_unlock_irq(&phba->hbalock);
mbox->vport = phba->pport;
mbox->mbox_cmpl = lpfc_sli4_ras_mbox_cmpl;
--
2.13.7
