This adds wlan pinmux and gpio settings to the Tegra30 Cardhu device tree.
Signed-off-by: Wei Ni <w...@nvidia.com>
---
arch/arm/boot/dts/tegra30-cardhu.dts | 30 ++++++++++++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts
b/arch/arm/boot/dts/tegra30-cardhu.dts
index c169bce..08749cc 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu.dts
@@ -31,6 +31,22 @@
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
+ sdmmc3_clk_pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ sdmmc3_cmd_pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
@@ -60,6 +76,15 @@
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
+ sdio3 {
+ nvidia,pins = "drive_sdio3";
+ nvidia,high-speed-mode = <0>;
+ nvidia,schmitt = <0>;
+ nvidia,pull-down-strength = <46>;
+ nvidia,pull-up-strength = <42>;
+ nvidia,slew-rate-rising = <1>;
+ nvidia,slew-rate-falling = <1>;
+ };
};
};
@@ -142,6 +167,11 @@
bus-width = <4>;
};
+ sdhci@78000400 {
+ status = "okay";
+ power-gpios = <&gpio 28 0>; /* gpio PD4 */
+ };
+
sdhci@78000600 {
status = "okay";
bus-width = <8>;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
