Many device manufacturers are using full-speed bInterval values in high-speed
interrupt endpoint descriptors. If the bInterval value is greater than 16,
assume the device uses full-speed descriptors and fix the value accordingly.
Signed-off-by: Laurent Pinchart <[EMAIL PROTECTED]>
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 35e27ff..ecf5838 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -85,15 +85,21 @@ static int usb_parse_endpoint(struct device *ddev, int
cfgno, int inum,
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
- /* If the bInterval value is outside the legal range,
- * set it to a default value: 32 ms */
+ /* Fix up bInterval values outside the legal range. Use 32 ms if no
+ * proper value can be guessed. */
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
i = 1;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
- n = 9; /* 32 ms = 2^(9-1) uframes */
+ /* Many device manufacturers are using full-speed
+ * bInterval values in high-speed interrupt endpoint
+ * descriptors. Try to fix those and fall back to a
+ * 32 ms default value otherwise. */
+ n = fls(d->bInterval*8);
+ if (n == 0)
+ n = 9; /* 32 ms = 2^(9-1) uframes */
j = 16;
break;
default: /* USB_SPEED_FULL or _LOW */
--
1.5.1.6
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
