On Tue, 17 Jul 2007, Branden Sletteland wrote:
> With that code added I just see the print out for each of the four
> ports three times, and the device is not detected.
Try this patch instead.
Alan Stern
Index: 2.6.22/drivers/usb/host/ehci-hub.c
===================================================================
--- 2.6.22.orig/drivers/usb/host/ehci-hub.c
+++ 2.6.22/drivers/usb/host/ehci-hub.c
@@ -372,6 +372,13 @@ ehci_hub_status_data (struct usb_hcd *hc
/* port N changes (bit N)? */
spin_lock_irqsave (&ehci->lock, flags);
for (i = 0; i < ports; i++) {
+
+ /* Some HCs don't like to be jostled during a reset */
+ if (ehci->reset_done[i] &&
+ time_before(jiffies, ehci->reset_done[i])) {
+ printk("Skip status poll for port %d\n", i+1);
+ continue;
+ }
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
/*
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
