On Tue, 3 Jun 2003, Major A wrote: > I couldn't make sense of the cset directory, so I took the bk8 > snapshot. I still can't do anything useful with the harddrive -- it > mounts ok, but then after the first few accesses the disk stops (the > activity light goes dark) while the computer waits (with a system load > of 2) for the data to come in. After some time (30sec or so) this gets > written to the log: > > > scsi: Device offlined - not ready after error recovery: host 2 channel 0 id 0 lun 0 > > SCSI disk error : <2 0 0 0> return code = 0x6050000 > > end_request: I/O error, dev sda, sector 47975616 > > Buffer I/O error on device sda1, logical block 5996948 > > SCSI disk error : <2 0 0 0> return code = 0x70000 > > end_request: I/O error, dev sda, sector 5816 > > journal-601, buffer write failed > > The last line (and the oops that comes afterwards) come from reiserfs, > which is very unhappy with the situation as I can imagine.
Can you send any debugging log information? Either USB debugging or usb-storage debugging. The little bit shown here doesn't say anything about what went wrong or how the kernel tried to fix it. Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel