Hi,
I am trying to use a usb/scsi adapter to connect to a Jaz
drive. The adaptor has shuttle chips in it, but I am getting the
following errors:
Jun 4 23:44:30 bobs kernel: usb.c: unhandled interfaces on device
Jun 4 23:44:30 bobs kernel: usb.c: USB device 2 (vend/prod 0x50d/0x115) is not
claimed by any active driver.
I am loading modules, usbcore followed by usb-storage then uhci. I think
I did it with the lst 2 swapped also. I made an entry for 50d in
unusual_devs.h but am not sure it was correct. Below is the syslog file.
Any help would be appreciated TIA
Bob
Jun 4 23:44:00 bobs kernel: usb.c: registered new driver usbdevfs
Jun 4 23:44:00 bobs kernel: usb.c: registered new driver hub
Jun 4 23:44:21 bobs kernel: Initializing USB Mass Storage driver...
Jun 4 23:44:21 bobs kernel: usb.c: registered new driver usb-storage
Jun 4 23:44:21 bobs kernel: USB Mass Storage support registered.
Jun 4 23:44:29 bobs kernel: uhci.c: USB UHCI at I/O 0xef80, IRQ 15
Jun 4 23:44:29 bobs kernel: uhci.c: detected 2 ports
Jun 4 23:44:29 bobs kernel: usb.c: new USB bus registered, assigned bus number 1
Jun 4 23:44:29 bobs kernel: usb.c: kmalloc IF c72c6b00, numif 1
Jun 4 23:44:29 bobs kernel: usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
Jun 4 23:44:29 bobs kernel: usb.c: USB device number 1 default language ID 0x0
Jun 4 23:44:29 bobs kernel: Product: USB UHCI-alt Root Hub
Jun 4 23:44:29 bobs kernel: testtest: USB UHCI-alt Root Hub
Jun 4 23:44:29 bobs kernel: SerialNumber: ef80
Jun 4 23:44:29 bobs kernel: hub.c: USB hub found
Jun 4 23:44:29 bobs kernel: hub.c: 2 ports detected
Jun 4 23:44:29 bobs kernel: hub.c: standalone hub
Jun 4 23:44:29 bobs kernel: hub.c: ganged power switching
Jun 4 23:44:29 bobs kernel: hub.c: global over-current protection
Jun 4 23:44:29 bobs kernel: hub.c: power on to power good time: 2ms
Jun 4 23:44:29 bobs kernel: hub.c: hub controller current requirement: 0mA
Jun 4 23:44:29 bobs kernel: hub.c: port removable status: RR
Jun 4 23:44:29 bobs kernel: hub.c: local power source is good
Jun 4 23:44:29 bobs kernel: hub.c: no over-current condition exists
Jun 4 23:44:29 bobs kernel: hub.c: enabling power on all ports
Jun 4 23:44:29 bobs kernel: usb.c: hub driver claimed interface c72c6b00
Jun 4 23:44:29 bobs kernel: usb.c: kusbd: /sbin/hotplug add 1
Jun 4 23:44:29 bobs kernel: usb.c: kusbd policy returned 0xfffffffe
Jun 4 23:44:29 bobs kernel: uhci.c: Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber
Jun 4 23:44:29 bobs kernel: uhci.c: USB Universal Host Controller Interface driver
Jun 4 23:44:29 bobs kernel: uhci.c: root-hub INT complete: port1: 80 port2: 93 data: 4
Jun 4 23:44:29 bobs kernel: hub.c: port 2 connection change
Jun 4 23:44:29 bobs kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s
Jun 4 23:44:29 bobs kernel: hub.c: port 2, portstatus 103, change 0, 12 Mb/s
Jun 4 23:44:29 bobs kernel: hub.c: USB new device connect on bus1/2, assigned device
number 2
Jun 4 23:44:30 bobs kernel: usb.c: kmalloc IF c72c6aa0, numif 1
Jun 4 23:44:30 bobs kernel: usb.c: new device strings: Mfr=1, Product=2,
SerialNumber=0
Jun 4 23:44:30 bobs kernel: usb.c: USB device number 2 default language ID 0x409
Jun 4 23:44:30 bobs kernel: Manufacturer: Belkin Components
Jun 4 23:44:30 bobs kernel: Product: Belkin USB SCSI Adapter
Jun 4 23:44:30 bobs kernel: usb.c: unhandled interfaces on device
Jun 4 23:44:30 bobs kernel: usb.c: USB device 2 (vend/prod 0x50d/0x115) is not
claimed by any active driver.
Jun 4 23:44:30 bobs kernel: Length = 18
Jun 4 23:44:30 bobs kernel: DescriptorType = 01
Jun 4 23:44:30 bobs kernel: USB version = 1.10
Jun 4 23:44:30 bobs kernel: Vendor:Product = 050d:0115
Jun 4 23:44:30 bobs kernel: MaxPacketSize0 = 64
Jun 4 23:44:30 bobs kernel: NumConfigurations = 1
Jun 4 23:44:30 bobs kernel: Device version = 1.33
Jun 4 23:44:30 bobs kernel: Device Class:SubClass:Protocol = 00:00:00
Jun 4 23:44:30 bobs kernel: Per-interface classes
Jun 4 23:44:30 bobs kernel: Configuration:
Jun 4 23:44:30 bobs kernel: bLength = 9
Jun 4 23:44:30 bobs kernel: bDescriptorType = 02
Jun 4 23:44:30 bobs kernel: wTotalLength = 0020
Jun 4 23:44:30 bobs kernel: bNumInterfaces = 01
Jun 4 23:44:30 bobs kernel: bConfigurationValue = 01
Jun 4 23:44:30 bobs kernel: iConfiguration = 03
Jun 4 23:44:30 bobs kernel: bmAttributes = 80
Jun 4 23:44:30 bobs kernel: MaxPower = 400mA
Jun 4 23:44:30 bobs kernel:
Jun 4 23:44:30 bobs kernel: Interface: 0
Jun 4 23:44:30 bobs kernel: Alternate Setting: 0
Jun 4 23:44:30 bobs kernel: bLength = 9
Jun 4 23:44:30 bobs kernel: bDescriptorType = 04
Jun 4 23:44:30 bobs kernel: bInterfaceNumber = 00
Jun 4 23:44:30 bobs kernel: bAlternateSetting = 00
Jun 4 23:44:30 bobs kernel: bNumEndpoints = 02
Jun 4 23:44:30 bobs kernel: bInterface Class:SubClass:Protocol = ff:01:01
Jun 4 23:44:30 bobs kernel: iInterface = 04
Jun 4 23:44:30 bobs kernel: Endpoint:
Jun 4 23:44:30 bobs kernel: bLength = 7
Jun 4 23:44:30 bobs kernel: bDescriptorType = 05
Jun 4 23:44:30 bobs kernel: bEndpointAddress = 01 (out)
Jun 4 23:44:30 bobs kernel: bmAttributes = 02 (Bulk)
Jun 4 23:44:30 bobs kernel: wMaxPacketSize = 0040
Jun 4 23:44:30 bobs kernel: bInterval = 00
Jun 4 23:44:30 bobs kernel: Endpoint:
Jun 4 23:44:30 bobs kernel: bLength = 7
Jun 4 23:44:30 bobs kernel: bDescriptorType = 05
Jun 4 23:44:30 bobs kernel: bEndpointAddress = 82 (in)
Jun 4 23:44:30 bobs kernel: bmAttributes = 02 (Bulk)
Jun 4 23:44:30 bobs kernel: wMaxPacketSize = 0040
Jun 4 23:44:30 bobs kernel: bInterval = 00
Jun 4 23:44:30 bobs kernel: usb.c: kusbd: /sbin/hotplug add 2
Jun 4 23:44:30 bobs kernel: usb.c: kusbd policy returned 0xfffffffe
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
