my system hangs with a kernel panic when a USB device is attached and
cupsd is called.
If I attache a USB devices (e.g. CHIPDRIVE micro smartcard reader) and
then call the cupsd the system hangs with a kernel panic. If the device
is used once before cupsd is called, thus the "(unused)" tag in the
modules list is gone, the system dosen't hang anymore. The problem
occures with all kernel I've tried e.g. debian standard kernel
2.4.18-2.4.21.
Below you find some logfiles and the ksymoops output of the kernel
panic.
CUPS version: cupsys 1.1.19final-1 (debian)
Thanks in advanced for your help,
Georg St.
ksymoops 2.4.6 on i686 2.4.20-cryptoapi. Options used
-V (specified)
-k /proc/ksyms (specified)
-l /proc/modules (specified)
-o /lib/modules/2.4.20-cryptoapi (specified)
-m /boot/System.map-2.4.20-cryptoapi (specified)
kernel BUG at sched.c:564!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0114279>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000018 ebx: deedd878 ecx: c029a000 edx: 00000000
esi: c029bdf0 edi: c029a000 ebp: c029bddc esp: c029bdb8
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c029b000)
Stack: c022045e deedd878 c029bdf0 c029a000 00000000 00000000 00000000 c029a000
deedd878 00000001 c010752d deedd81c deedd800 ffffffea 00000001 c029a000
deedd884 deedd884 c0107678 deedd878 deedd800 00000000 e174d23d 00000000
Call Trace: [<c010752d>] [<c0107678>] [<e174d23d>] [<c016a24a>] [<c016aa4f>]
[<c016b20f>] [<e17455c6>] [<c01b2822>] [<e17447b5>] [<e1744958>] [<c0169fcf>]
[<c011acbc>] [<c011d9c2>] [<c011ac02>] [<c011ab46>] [<c011a96a>] [<c0109af2>]
[<c0111e9c>] [<c0111e9c>] [<c0106d23>] [<c0111fa5>] [<c0111e9c>] [<c0106d00>]
[<c0106d89>] [<c0105000>] [<c0105027>]
Code: 0f 0b 34 02 56 04 22 c0 83 c4 04 8b 4d f4 c1 e1 05 81 c1 20
>>EIP; c0114279 <schedule+4d/324> <=====
>>ebx; deedd878 <_end+1ebde3d8/21422bc0>
>>ecx; c029a000 <init_task_union+0/2000>
>>esi; c029bdf0 <init_task_union+1df0/2000>
>>edi; c029a000 <init_task_union+0/2000>
>>ebp; c029bddc <init_task_union+1ddc/2000>
>>esp; c029bdb8 <init_task_union+1db8/2000>
Trace; c010752d <__down+55/9c>
Trace; c0107678 <__down_failed+8/c>
Trace; e174d23d <[usbserial].text.lock.usbserial+2d/db>
Trace; c016a24a <tty_default_put_char+1e/24>
Trace; c016aa4f <echo_char+2f/60>
Trace; c016b20f <n_tty_receive_buf+39b/edc>
Trace; e17455c6 <[usb-uhci]uhci_clean_transfer+86/1bc>
Trace; c01b2822 <pci_pool_free+16/e4>
Trace; e17447b5 <[usb-uhci]delete_desc+19/20>
Trace; e1744958 <[usb-uhci]delete_qh+58/64>
Trace; c0169fcf <flush_to_ldisc+db/e4>
Trace; c011acbc <__run_task_queue+50/5c>
Trace; c011d9c2 <tqueue_bh+16/1c>
Trace; c011ac02 <bh_action+1a/40>
Trace; c011ab46 <tasklet_hi_action+4a/70>
Trace; c011a96a <do_softirq+5a/a4>
Trace; c0109af2 <do_IRQ+96/a8>
Trace; c0111e9c <apm_cpu_idle+0/13c>
Trace; c0111e9c <apm_cpu_idle+0/13c>
Trace; c0106d23 <default_idle+23/28>
Trace; c0111fa5 <apm_cpu_idle+109/13c>
Trace; c0111e9c <apm_cpu_idle+0/13c>
Trace; c0106d00 <default_idle+0/28>
Trace; c0106d89 <cpu_idle+41/54>
Trace; c0105000 <_stext+0/0>
Trace; c0105027 <rest_init+27/28>
Code; c0114279 <schedule+4d/324>
00000000 <_EIP>:
Code; c0114279 <schedule+4d/324> <=====
0: 0f 0b ud2a <=====
Code; c011427b <schedule+4f/324>
2: 34 02 xor $0x2,%al
Code; c011427d <schedule+51/324>
4: 56 push %esi
Code; c011427e <schedule+52/324>
5: 04 22 add $0x22,%al
Code; c0114280 <schedule+54/324>
7: c0 83 c4 04 8b 4d f4 rolb $0xf4,0x4d8b04c4(%ebx)
Code; c0114287 <schedule+5b/324>
e: c1 e1 05 shl $0x5,%ecx
Code; c011428a <schedule+5e/324>
11: 81 c1 20 00 00 00 add $0x20,%ecx
<0>Kernel panic: Aiee, killing interrupt handler!
00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [40] #09 [0105]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-ebffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 4: I/O ports at 1800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01) (prog-if 00
[UHCI])
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at 1840 [size=32]
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 41) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00003000-00007fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: ec000000-f7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01) (prog-if 8a [Master SecP
PriP])
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 01)
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1880 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 01)
Subsystem: IBM ThinkPad T23 (2647-4MG) or A30p (2653-64G)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [disabled] [size=256]
Region 1: I/O ports at 18c0 [disabled] [size=64]
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 01) (prog-if 00 [Generic])
Subsystem: IBM: Unknown device 0227
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05) (prog-if 00
[VGA])
Subsystem: IBM ThinkPad T23 (2647-4MG)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Region 3: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
02:00.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM ThinkPad T23 (2647-4MG)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=05, sec-latency=176
Memory window 0: 00000000-00000000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
02:00.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM ThinkPad T23 (2647-4MG)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=06, subordinate=08, sec-latency=176
Memory window 0: 00000000-00000000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Subsystem: Actiontec Electronics Inc: Unknown device 0406
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ec000000 (32-bit, prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet
Controller (rev 41)
Subsystem: IBM ThinkPad A/T/X Series
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 7000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=1840 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=1820 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=067b ProdID=2303 Rev= 2.00 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=1800 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 11 model name : Intel(R) Pentium(R) III Mobile CPU 1200MHz stepping : 1 cpu MHz : 1199.010 cache size : 32 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 2392.06
00000000-0009efff : System RAM
0009f000-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000ce000-000cefff : Extension ROM
000cf000-000cffff : Extension ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ff6ffff : System RAM
00100000-0021a3d4 : Kernel code
0021a3d5-002995c3 : Kernel data
1ff70000-1ff7dfff : ACPI Tables
1ff7e000-1ff7ffff : ACPI Non-volatile Storage
1ff80000-1fffffff : reserved
20000000-200003ff : Intel Corp. 82801CAM IDE U100
50000000-50000fff : Texas Instruments PCI1420
51000000-51000fff : Texas Instruments PCI1420 (#2)
c0100000-c01fffff : PCI Bus #01
c0100000-c017ffff : S3 Inc. SuperSavage IX/C SDR
c0200000-c0200fff : Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller
c0200000-c0200fff : eepro100
d0000000-dfffffff : Intel Corp. 82830 830 Chipset Host Bridge
e0000000-ebffffff : PCI Bus #01
e0000000-e1ffffff : S3 Inc. SuperSavage IX/C SDR
e4000000-e7ffffff : S3 Inc. SuperSavage IX/C SDR
e8000000-ebffffff : S3 Inc. SuperSavage IX/C SDR
e8000000-e8ecffff : vesafb
ec000000-ec000fff : Harris Semiconductor Prism 2.5 Wavelan chipset
ff800000-ffffffff : reserved
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : Intel Corp. 82801CAM IDE U100 0170-0177 : ide1 01f0-01f7 : Intel Corp. 82801CAM IDE U100 01f0-01f7 : ide0 02f8-02ff : serial(set) 0376-0376 : Intel Corp. 82801CAM IDE U100 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 03c0-03df : vesafb 03f6-03f6 : Intel Corp. 82801CAM IDE U100 03f6-03f6 : ide0 03f8-03ff : serial(set) 0cf8-0cff : PCI conf1 1800-181f : Intel Corp. 82801CA/CAM USB (Hub #1) 1800-181f : usb-uhci 1820-183f : Intel Corp. 82801CA/CAM USB (Hub #2) 1820-183f : usb-uhci 1840-185f : Intel Corp. 82801CA/CAM USB (Hub #3) 1840-185f : usb-uhci 1860-186f : Intel Corp. 82801CAM IDE U100 1860-1867 : ide0 1868-186f : ide1 1880-189f : Intel Corp. 82801CA/CAM SMBus 18c0-18ff : Intel Corp. 82801CA/CAM AC'97 Audio 1c00-1cff : Intel Corp. 82801CA/CAM AC'97 Audio 2000-207f : Intel Corp. 82801CA/CAM AC'97 Modem 2400-24ff : Intel Corp. 82801CA/CAM AC'97 Modem 7000-703f : Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller 7000-703f : eepro100
ipt_LOG 3224 4 (autoclean) iptable_mangle 2256 0 (autoclean) (unused) iptable_filter 1732 1 (autoclean) iptable_nat 14200 0 (unused) ip_conntrack 16576 1 [iptable_nat] ip_tables 10520 6 [ipt_LOG iptable_mangle iptable_filter iptable_nat] nls_cp437 4380 1 (autoclean) vfat 9228 1 (autoclean) fat 29080 0 (autoclean) [vfat] nls_iso8859-1 2844 2 (autoclean) ext3 57856 6 (autoclean) jbd 35464 6 (autoclean) [ext3] cryptoloop 1756 0 (unused) loop 9712 0 [cryptoloop] cryptoapi 3468 0 [cryptoloop] eepro100 18548 1 mii 2272 0 [eepro100] ntfs 49152 1 ircomm-tty 19200 0 (unused) ircomm 7452 0 [ircomm-tty] irda 81232 0 [ircomm-tty ircomm] pl2303 10072 0 usbserial 17436 0 [pl2303] usb-uhci 21196 0 (unused) parport_pc 13860 0 parport 21824 0 [parport_pc] keybdev 1664 0 (unused) usbkbd 2908 0 (unused) usbcore 60992 1 [pl2303 usbserial usb-uhci usbkbd] input 3104 0 [keybdev usbkbd]
usbserinfo:1.0 driver:v1.4 0: module:pl2303 name:"PL-2303" vendor:067b product:2303 num_ports:1 port:1 path:usb-00:1d.1-2
Linux version 2.4.20-cryptoapi ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son M�r 16 01:13:49 CET 2003
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux tux 2.4.20-cryptoapi #1 Son M�r 16 01:13:49 CET 2003 i686 GNU/Linux Gnu C 3.3.1 Gnu make 3.80 util-linux 2.11z mount 2.11z modutils 2.4.21 e2fsprogs 1.34-WIP pcmcia-cs 3.1.33 PPP 2.4.1 Linux C Library 2.3.1 Dynamic linker (ldd) 2.3.1 Procps 3.1.9 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0 Modules Loaded ipt_LOG iptable_mangle iptable_filter iptable_nat ip_conntrack ip_tables nls_cp437 vfat fat nls_iso8859-1 ext3 jbd cryptoloop loop cryptoapi eepro100 mii ntfs ircomm-tty ircomm irda pl2303 usbserial usb-uhci parport_pc parport keybdev usbkbd usbcore input
