Hello,
I have problems with my scanner. When I plug it into the USB-Port of my computer
the printer is disconnected. Even when I have only the scanner connected, it
doesn't work.
At another computer it works, perhapst it is an problem of my chipset?
Does anyone has an idea how to solve the problem ?
Here some infos. When you need more, please tell it me.
Thanks for your help.
Ulrich
from /var/log/kern.log:
-> Connect of the printer (Lexmark Optra E312)
Aug 10 16:02:37 home kernel: hub.c: new USB device 00:07.2-1, assigned address 2
Aug 10 16:02:37 home kernel: usb.c: USB device 2 (vend/prod 0x43d/0xc) is not
claimed by any active driver.
Aug 10 16:02:40 home kernel: usb.c: registered new driver usblp
Aug 10 16:02:40 home kernel: printer.c: usblp0: USB Bidirectional printer dev 2
if 0 alt 0 proto 2 vid 0x043D pid 0x000C
Aug 10 16:02:40 home kernel: printer.c: v0.11: USB Printer Device Class driver
-> Connect of the scanner (Mustek 1200 UB)
Aug 10 16:03:29 home kernel: usb.c: USB disconnect on device 00:07.2-1 address 2
Aug 10 16:03:29 home kernel: printer.c: usblp0: removed
Aug 10 16:03:29 home kernel: hub.c: new USB device 00:07.2-2, assigned address 3
Aug 10 16:03:29 home kernel: host/usb-uhci.c: interrupt, status 2, frame# 1955
Aug 10 16:03:29 home kernel: usb.c: USB device not accepting new
address=3(error=-110)
Aug 10 16:03:30 home kernel: hub.c: new USB device 00:07.2-2, assigned address 4
Aug 10 16:03:30 home kernel: usb.c: USB device not accepting new
address=4(error=-110)
schenck: cat /proc/version
Linux version 2.4.21-us2 ([EMAIL PROTECTED]) (gcc-Version 3.3 (Debian)) #1 Son Jun 15
15:10:47 CEST 2003
schenck: cat /proc/interrupts
CPU0
0: 69621 XT-PIC timer
1: 2270 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 256223 XT-PIC serial
4: 3859 XT-PIC serial
7: 1 XT-PIC parport0
8: 4 XT-PIC rtc
9: 1 XT-PIC MS Sound System
10: 0 XT-PIC usb-uhci
14: 20567 XT-PIC ide0
15: 1 XT-PIC ide1
NMI: 0
ERR: 0
schenck: lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ Latency: 32
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x
AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency:
0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: e6000000-e6ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP]
(rev 47) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master
IDE (rev 06) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+
SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency:
32 Region 4: I/O ports at e000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 02) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e400 [size=32]
00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
(prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0084
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: <available only to root>
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
