> > Here's the Viking usb/devices dump again... > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 > > P: Vendor=07cc ProdID=0004 Rev= 0.01 > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > > I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms > > E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms > > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > That one looks really wierd for a storage device.
It's possible it may have aspirations of being more than a storage device. I'll tell you all I know about it. Unfortunately, I don't have the box or owner's manual, as it's a loaner. It's in a neat translucent blue case. On the top, it says "Viking Components", and their logo, "Intelliflash", and "USB flash memory reader". On the bottom, it's got a simple sticker with FCC and CE marks, "Card Reader/Writer", and "MODEL: RFLREAD/U", then another sticker with a serial number and barcode. It's got a molded-in USB cable coming out the back of it, with a strain relief and a ferrite core. It's got two slots: one SmartMedia, and one PCMCIA type-II. It comes with a PCMCIA-to-CF adapter (also Viking Components) installed, so it's clear that the intended primary use is for CF flash/disk devices. But there's an eject button for the PCMCIA slot, which does indeed eject the bundled PCMCIA-to-CF adapter. Peering inside the PCMCIA opening, I see three ICs. One 24-pin DIP, one 20-pin SOIC, and one TSOP that I can't get a pin count on, but I'm guessing it's in the 80 to 100 range. I've tried to take it apart a couple times (the case is a two-piece snap-together), but it's put together pretty tightly, and it doesn't seem like I'll be able pull the case apart with the tools I have without breaking something. Anyway, with a full PCMCIA slot and more logic (or at least less vertically integrated logic) than I'd imagine the average USB flash- only reader has on board, it could be that it's trying to be a generic USB-to-PCMCIA bridge device. Maybe we'd get further if we tried to treat it as such? ------Carl ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users