Hi,
I cannot fire up my pendrive with my brand new machine.
The kernel detected the presence of the pendrive, but it couldn't
detect the single VFAT partition on it. sda appears in /dev (with
devfs), but I can't read(2) or write(2) or mount(1) or doing anything
with it (No such device or address). I've created sda1 with `mknod
/dev/sda1 b 8 1` and tried to mount it with no success. I've also
tried out a couple of kernel versions from 2.4.19 to 2.4.23-pre7 and
RTFM a _lot_ but I'm tired of it so please anyone help me.
With my another machine, which is a Celeron with a BX chipset
mainboard it works fine likewise at school on Redhat 8.1
(configuration unknown).
I don't know what additional informations should I insert beyond the
followings.
<shell>
[EMAIL PROTECTED]:~$ dmesg
Linux version 2.4.23-pre7 ([EMAIL PROTECTED]) (gcc version 2.95.4
20011002 (Debian prerelease)) #15 Sun Oct 12 21:08:58 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: hdd=scsi vga=6
ide_setup: hdd=scsi
Initializing CPU#0
Detected 1829.999 MHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 3643.80 BogoMIPS
Memory: 515380k/524224k available (1782k kernel code, 8456k reserved, 712k data,
76k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfae70, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xe0851000, 00:e0:4c:eb:30:38, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 Aperture @ 0xe0000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: Bios didn't set cable bits corectly. Enabling workaround.
AMD_IDE: nVidia Corporation nForce2 IDE (rev a2) UDMA100 controller on pci00:09.
0
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: C/H/S=39236/16/255 from BIOS ignored
hda: Maxtor 6Y080L0, ATA DISK drive
blk: queue c03adf60, I/O limit 4095Mb (mask 0xffffffff)
hdc: Pioneer DVD-ROM ATAPIModel DVD-120, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p4 < p5 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Intel 810 + AC97 Audio, version 0.24, 13:00:23 Oct 12 2003
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xd800 and 0xd400, MEM 0x0000 and 0x0000,
IRQ 9
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
ide0(3,1):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
cryptoapi: loaded
cryptoapi: Registered serpent-ecb (0)
cryptoapi: Registered serpent-cbc (65536)
cryptoapi: Registered serpent-cfb (131072)
cryptoapi: Registered serpent-ctr (262144)
cryptoapi: Registered serpent-rtc (524288)
cryptoloop: loaded
eth0: link down
PCI: Setting latency timer of device 00:02.2 to 64
ehci_hcd 00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 00:02.2: irq 11, pci mem e0951000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:02.2: ehci_start hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
ehci_hcd 00:02.2: ehci_start portroute 0 0 1 1 1 0
ehci_hcd 00:02.2: ehci_start hcc_params a086 caching frame 256/512/1024 park
ehci_hcd 00:02.2: capability 0001 at a0
ehci_hcd 00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 64 is not supported by device 00:02.2
ehci_hcd 00:02.2: init command 010b09 park=3 ithresh=1 period=256 RUN
ehci_hcd 00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
hcd.c: 00:02.2 root hub device address 1
usb.c: kmalloc IF df7c0740, numif 1
usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Manufacturer: Linux 2.4.23-pre7 ehci_hcd
Product: nVidia Corporation nForce2 USB Controller
SerialNumber: 00:02.2
hub.c: USB hub found
hub.c: 6 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: Single TT
hub.c: TT requires at most 8 FS bit times
hub.c: Port indicators are not supported
hub.c: power on to power good time: 0ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRRRRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface df7c0740
usb.c: kusbd: /sbin/hotplug add 1
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe0959000, IRQ 5
usb-ohci.c: usb-00:02.0, nVidia Corporation nForce2 USB Controller
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF df7c0b40, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e0959000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface df7c0b40
usb.c: kusbd: /sbin/hotplug add 1
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe095b000, IRQ 10
usb-ohci.c: usb-00:02.1, nVidia Corporation nForce2 USB Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
usb.c: kmalloc IF df7c0d80, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e095b000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface df7c0d80
usb.c: kusbd: /sbin/hotplug add 1
usb-uhci.c: $Revision: 1.275 $ time 20:20:39 Oct 12 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
ehci_hcd 00:02.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub.c: port 2, portstatus 501, change 1, 480 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 501, change 1, 480 Mb/s
hub.c: port 2, portstatus 501, change 0, 480 Mb/s
hub.c: port 2, portstatus 501, change 0, 480 Mb/s
hub.c: port 2, portstatus 501, change 0, 480 Mb/s
hub.c: port 2, portstatus 501, change 0, 480 Mb/s
hub.c: port 2, portstatus 511, change 0, 480 Mb/s
hub.c: port 2 of hub 1 not reset yet, waiting 10ms
hub.c: port 2, portstatus 511, change 0, 480 Mb/s
hub.c: port 2 of hub 1 not reset yet, waiting 10ms
ehci_hcd 00:02.2: port 2 full speed --> companion
ehci_hcd 00:02.2: GetStatus port 2 status 003001 POWER OWNER sig=se0 CONNECT
hub.c: port 2, portstatus 0, change 10, 12 Mb/s
ehci_hcd 00:02.2: free_config devnum 0
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
hub.c: port 4, portstatus 100, change 0, 12 Mb/s
hub.c: port 5, portstatus 100, change 0, 12 Mb/s
hub.c: port 6, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 10, 12 Mb/s
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: kmalloc IF df58cb00, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Generic
Product: Mass Storage Device
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: Flash Disk Rev: 7.77
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 128000 512-byte hdwr sectors (66 MB)
sda: Write Protect is off
/dev/scsi/host0/bus0/target0/lun0:usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb-storage: host_reset() requested but not implemented
scsi: device set offline - command error recover failed: host 0 channel 0 id 0
lun 0
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 6050000
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2
I/O error: dev 08:00, sector 0
unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface df58cb00
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 3, portstatus 100, change 0, 12 Mb/s
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -110
usb_control/bulk_msg: timeout
</shell>
The last two line is repeated approximately 100 times.
<shell>
[EMAIL PROTECTED]:~$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: Flash Disk Rev: 7.77
Type: Direct-Access ANSI SCSI revision: 02
[EMAIL PROTECTED]:~$ cat /proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: Generic
Product: Mass Storage Device
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 058f93800000000000000000
Attached: Yes
</shell>
Thanks in advance,
Laci
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
