The keyboard is a Logitech Elite, but I don’t think the USB drivers ever see that.
Interestingly, the /proc/bus/usb/devices shows neither the mouse nor the keyboard. The mouse does work, and /var/log/messages shows that at least it is recognized. Notice the vendor/prod id of 0557/7000. I haven’t seen any references to 7000 anywhere. The GCS632U is a two-port KVM. What else do you need to help me out? Thanks in advance. -Craig /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 22/900 us ( 2%), #Int= 2, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.01 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=05e3 ProdID=0604 Rev= 0.12 S: Product=USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0557 ProdID=7000 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=200mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms /var/log/messages: Jun 2 01:01:49 rosie kernel: hub.c: new USB device 00:04.2-1.2.2, assigned address 6 Jun 2 01:01:49 rosie kernel: usb-uhci.c: interrupt, status 3, frame# 1896 Jun 2 01:01:49 rosie kernel: input0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb1:6.0 Jun 2 01:01:52 rosie /etc/hotplug/usb.agent: Setup hid for USB product 45e/53/300 Jun 2 01:01:52 rosie /etc/hotplug/usb.agent: Setup mousedev for USB product 45e/53/300 Jun 2 01:01:53 rosie devlabel: devlabel service started/restarted Jun 2 01:01:55 rosie kernel: usb-uhci.c: interrupt, status 3, frame# 2020 Jun 2 01:01:55 rosie kernel: usb.c: USB disconnect on device 00:04.2-1.2.2 address 6 ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
