Hi,
apparently, one can take four (or so) cpus out, glue them to the base of
an alumunim plate. (pins away from the plate).
connect the pins in series. So the pins on the left side of the chip are
soldered together, and then to an electrical bus. Similarily for the right
side.
Apply power to the electrical bus. This will provide a hot plate.
I suppose in the spit of this email, one should use an old power supply.
Derek.
Derek Smithies Ph.D.
IndraNet Technologies Ltd.
ph +64 3 365 6485
Web: http://www.indranet-technologies.com/
"The only thing IE should be used for is to download Fire Fox"
