Andrew, It is DDR 266 as I remember.... I will double check..
James. -----Original Message----- From: Andrew Ip [mailto:[EMAIL PROTECTED] Sent: 10 August 2003 18:07 To: James Weir Cc: [EMAIL PROTECTED] Subject: Re: help can't get it working on epia-m10000 Hi James, What kind of memory are you using? -Andrew On Sun, Aug 10, 2003 at 05:14:10PM +0100, James Weir wrote: > I have included below the output from the console when attempting to > boot linuxbios, it always seems to just hang at this point... any > pointers... I am on an EPIA-M10000 board. > > Thanks, > > James. > > LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 starting... > Copying LinuxBIOS to ram. > Jumping to LinuxBIOS. > LinuxBIOS-1.0.0 Sun Aug 10 17:10:40 BST 2003 booting... > Finding PCI configuration type. > PCI: Using configuration type 1 > Scanning PCI bus...PCI: pci_scan_bus for bus 0 > PCI: 00:00.0 [1106/3123] > PCI: 00:01.0 [1106/b091] > PCI: 00:0d.0 [1106/3044] > PCI: 00:10.0 [1106/3038] > PCI: 00:10.1 [1106/3038] > PCI: 00:10.2 [1106/3038] > PCI: 00:10.3 [1106/3104] > PCI: 00:11.0 [1106/3177] > PCI: 00:11.1 [1106/0571] > PCI: 00:11.5 [1106/3059] > PCI: 00:12.0 [1106/3065] > PCI: pci_scan_bus for bus 1 > PCI: pci_scan_bus returning with max=01 > PCI: pci_scan_bus returning with max=01 > done > Allocating PCI resources... > PCI: 00:00.0 register 10(00000008), read-only ignoring it > PCI: 00:00.0 register 10(00000008), read-only ignoring it > PCI: 00:00.0 register 10(00000008), read-only ignoring it > PCI: 00:00.0 register 10(00000008), read-only ignoring it > ASSIGN RESOURCES, bus 0 > PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io > PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem > PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem > PCI: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem > PCI: 00:0d.0 14 <- [0x00001800 - 0x0000187f] io > PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io > PCI: 00:10.1 20 <- [0x000018a0 - 0x000018bf] io > PCI: 00:10.2 20 <- [0x000018c0 - 0x000018df] io > PCI: 00:10.3 10 <- [0xfeb01000 - 0xfeb010ff] mem > PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io > PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io > PCI: 00:12.0 10 <- [0x00001400 - 0x000014ff] io > PCI: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem > ASSIGNED RESOURCES, bus 0 > done. > Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 > PCI: 00:01.0 cmd <- 07 > PCI: 00:0d.0 cmd <- 83 > PCI: 00:10.0 cmd <- 01 > PCI: 00:10.1 cmd <- 01 > PCI: 00:10.2 cmd <- 01 > PCI: 00:10.3 cmd <- 02 > PCI: 00:11.0 cmd <- 87 > PCI: 00:11.1 cmd <- 07 > PCI: 00:11.5 cmd <- 01 > PCI: 00:12.0 cmd <- 83 > done. > Initializing PCI devices... > PCI devices initialized > totalram: 127M > Initializing CPU #0 > Enabling cache... > Setting fixed MTRRs(0-88) type: UC > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel: (852) 2542 2046 Fax: (852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key, please obtain it from http://www.keyserver.net/en. _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios