Do either of you happen to know if all the EPIA boards use the same PLCC Flash?
-marc -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ron minnich Sent: Thursday, August 26, 2004 5:50 PM To: Joshua Wise Cc: [EMAIL PROTECTED] Subject: Re: EPIA flash questions On Thu, 26 Aug 2004, Joshua Wise wrote: > On board is a PLCC form factor 39SF020A. Mouser also carries the > 39SF040A, which is a 512k ROM. The pinouts seem to be the same, but I'm > not sure whether the extra address lines are carried out anywhere. Does > anyone know whether the EPIA will be able to use the extra 256k? I think it will, I've used that I'm pretty sure. > Also, I was not planning on getting a BIOS savior. Does anyone have > experience with hotswapping flashes on the EPIA? Will bad things happen > if I do? Do I need to make myself an external board with chip select > lines, or can I just hotswap? hot swap has always worked fine for me. ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios