The code to properly expose domain numbers in /proc is somewhat
bogus on ppc64 as it depends on the "buid" field being non-0,
but that field is really pseries specific.
This removes that code and makes ppc64 use the same code as 32-bit
which effectively decides whether to expose domains based on
ppc_pci_flags set by the platform, and sets the default for 64-bit
to enable domains and enable compatibility for domain 0 (which
strips the domain number for domain 0 to help with X servers).
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/kernel/pci-common.c | 10 ++++------
arch/powerpc/kernel/pci_64.c | 5 +++++
2 files changed, 9 insertions(+), 6 deletions(-)
--- linux-work.orig/arch/powerpc/kernel/pci-common.c 2008-09-09
16:31:13.000000000 +1000
+++ linux-work/arch/powerpc/kernel/pci-common.c 2008-09-09 16:31:15.000000000
+1000
@@ -53,8 +53,9 @@ static int global_phb_number; /* Global
/* ISA Memory physical address */
resource_size_t isa_mem_base;
-/* Default PCI flags is 0 */
-unsigned int ppc_pci_flags;
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int ppc_pci_flags = 0;
+
struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
{
@@ -669,15 +670,12 @@ void __devinit pci_process_bridge_OF_ran
int pci_proc_domain(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
-#ifdef CONFIG_PPC64
- return hose->buid != 0;
-#else
+
if (!(ppc_pci_flags & PPC_PCI_ENABLE_PROC_DOMAINS))
return 0;
if (ppc_pci_flags & PPC_PCI_COMPAT_DOMAIN_0)
return hose->global_number != 0;
return 1;
-#endif
}
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region
*region,
Index: linux-work/arch/powerpc/kernel/pci_64.c
===================================================================
--- linux-work.orig/arch/powerpc/kernel/pci_64.c 2008-09-09
16:31:39.000000000 +1000
+++ linux-work/arch/powerpc/kernel/pci_64.c 2008-09-09 16:31:45.000000000
+1000
@@ -417,6 +417,11 @@ static int __init pcibios_init(void)
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
+ /* On ppc64, we always enable PCI domains and we keep domain 0
+ * backward compatible in /proc for video cards
+ */
+ ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
+
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
scan_phb(hose);
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
