[PATCH] pq2fads: Update device tree for use with device-tree-aware u-boot.

[Scott Wood]

Add aliases, and correct CS0 offset to match how u-boot
programs it (this was not a problem with cuImage because
the wrapper would reprogram the localbus to match the device
tree).

Signed-off-by: Scott Wood <scottw...@freescale.com>
---
 arch/powerpc/boot/dts/pq2fads.dts |   20 ++++++++++++++------
 1 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/pq2fads.dts 
b/arch/powerpc/boot/dts/pq2fads.dts
index b2d6109..0bb6693 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -17,6 +17,14 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -45,7 +53,7 @@
                #size-cells = <1>;
                reg = <0xf0010100 0x60>;
 
-               ranges = <0x0 0x0 0xfe000000 0x800000
+               ranges = <0x0 0x0 0xff800000 0x800000
                          0x1 0x0 0xf4500000 0x8000
                          0x8 0x0 0xf8200000 0x8000>;
 
@@ -71,7 +79,7 @@
                };
        };
 
-       p...@f0010800 {
+       pci0: p...@f0010800 {
                device_type = "pci";
                reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
                compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
@@ -142,7 +150,7 @@
                                reg = <0x119f0 0x10 0x115f0 0x10>;
                        };
 
-                       ser...@11a00 {
+                       serial0: ser...@11a00 {
                                device_type = "serial";
                                compatible = "fsl,mpc8280-scc-uart",
                                             "fsl,cpm2-scc-uart";
@@ -153,7 +161,7 @@
                                fsl,cpm-command = <0x800000>;
                        };
 
-                       ser...@11a20 {
+                       serial1: ser...@11a20 {
                                device_type = "serial";
                                compatible = "fsl,mpc8280-scc-uart",
                                             "fsl,cpm2-scc-uart";
@@ -164,7 +172,7 @@
                                fsl,cpm-command = <0x4a00000>;
                        };
 
-                       ether...@11320 {
+                       enet0: ether...@11320 {
                                device_type = "network";
                                compatible = "fsl,mpc8280-fcc-enet",
                                             "fsl,cpm2-fcc-enet";
@@ -176,7 +184,7 @@
                                fsl,cpm-command = <0x16200300>;
                        };
 
-                       ether...@11340 {
+                       enet1: ether...@11340 {
                                device_type = "network";
                                compatible = "fsl,mpc8280-fcc-enet",
                                             "fsl,cpm2-fcc-enet";
-- 
1.5.6.rc1.6.gc53ad.dirty
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev