Michael Ellerman wrote:
On Wed, 2009-04-08 at 23:23 -0500, Kumar Gala wrote:
On Apr 8, 2009, at 6:53 PM, Michael Ellerman wrote:
On Wed, 2009-04-08 at 17:15 -0500, Timur Tabi wrote:
On Wed, Apr 8, 2009 at 4:31 PM, Tejun Heo <t...@kernel.org> wrote:
Hmmm... for now,
I think it would be best to revert the original change. Jeff, can
you
please do that?
Actually, give me a few days before you do that. A colleague gave me
some suggestions to debug this.
What device did you say it was? A "ULI M1575" ?
Is that this one?
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575,
hpcd_quirk_uli1575);
static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
{
u32 temp32;
if (!machine_is(mpc86xx_hpcd))
return;
/* Disable INTx */
pci_read_config_dword(dev, 0x48, &temp32);
pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
..
It is the odd thing is the board he's running on is a mpc86xx_hpcd so
he shouldn't be hitting the code that actually disables INTx.
Sorry Kumar that's not parsing :)
He is running an mpc86xx_hpcd, so he _should_ be hitting the code that
disables INTX?
The reversed logic of the PCI bit itself also makes for confusing
discusion. In an attempt to be helpful, here is a restatement of what
is happening:
1) Old 'ahci' used to clear PCI_COMMAND_INTX_DISABLE, thus ensuring INTX
interrupts are enabled... if and only if MSI is unavailable.
2) Current 'ahci' no longer does this
3) As a result, Timur's 'ahci' is no longer receiving interrupts.
Presumably this means that BOTH of the following conditions are true
a) INTX is disabled
b) MSI is not available
Today I am thinking we should either revert the libata commit
(a5bfc4714b3f01365aef89a92673f2ceb1ccf246), or poke PCI to twiddle INTX
for us at pci_enable_device() time, perhaps.
I lean towards the former, but maybe the platform folks prefer a third
solution?
Jeff
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
