Some of the PCI features we have in ppc32 we will need on ppc64
platforms in the future.  These include support for:

* ppc_md.pci_exclude_device
* indirect config cycles
* early config cycles

We also simplified the logic in fake_pci_bus() to assume it will always
get a valid pci_controller.  Since all current callers seem to pass it
one.

Signed-off-by: Kumar Gala <[email protected]>
---
 arch/powerpc/include/asm/machdep.h    |    6 +-
 arch/powerpc/include/asm/pci-bridge.h |   35 +++++++---------
 arch/powerpc/kernel/pci-common.c      |   70 ++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c          |   71 ---------------------------------
 4 files changed, 89 insertions(+), 93 deletions(-)

diff --git a/arch/powerpc/include/asm/machdep.h 
b/arch/powerpc/include/asm/machdep.h
index 11d1fc3..9efa2be 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -209,14 +209,14 @@ struct machdep_calls {
        /*
         * optional PCI "hooks"
         */
-       /* Called in indirect_* to avoid touching devices */
-       int (*pci_exclude_device)(struct pci_controller *, unsigned char, 
unsigned char);
-
        /* Called at then very end of pcibios_init() */
        void (*pcibios_after_init)(void);
 
 #endif /* CONFIG_PPC32 */
 
+       /* Called in indirect_* to avoid touching devices */
+       int (*pci_exclude_device)(struct pci_controller *, unsigned char, 
unsigned char);
+
        /* Called after PPC generic resource fixup to perform
           machine specific fixups */
        void (*pcibios_fixup_resources)(struct pci_dev *);
diff --git a/arch/powerpc/include/asm/pci-bridge.h 
b/arch/powerpc/include/asm/pci-bridge.h
index 4c61fa0..e074420 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -77,9 +77,7 @@ struct pci_controller {
 
        int first_busno;
        int last_busno;
-#ifndef CONFIG_PPC64
        int self_busno;
-#endif
 
        void __iomem *io_base_virt;
 #ifdef CONFIG_PPC64
@@ -104,7 +102,6 @@ struct pci_controller {
        unsigned int __iomem *cfg_addr;
        void __iomem *cfg_data;
 
-#ifndef CONFIG_PPC64
        /*
         * Used for variants of PCI indirect handling and possible quirks:
         *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -128,7 +125,6 @@ struct pci_controller {
 #define PPC_INDIRECT_TYPE_BIG_ENDIAN           0x00000010
 #define PPC_INDIRECT_TYPE_BROKEN_MRM           0x00000020
        u32 indirect_type;
-#endif /* !CONFIG_PPC64 */
        /* Currently, we limit ourselves to 1 IO range and 3 mem
         * ranges since the common pci_bus structure can't handle more
         */
@@ -146,21 +142,6 @@ struct pci_controller {
 #endif /* CONFIG_PPC64 */
 };
 
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-       return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-       /* No specific ISA handling on ppc32 at this stage, it
-        * all goes through PCI
-        */
-       return 0;
-}
-
 /* These are used for config access before all the PCI probing
    has been done. */
 extern int early_read_config_byte(struct pci_controller *hose, int bus,
@@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller 
*hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
                               resource_size_t cfg_addr,
                               resource_size_t cfg_data, u32 flags);
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+       return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+       /* No specific ISA handling on ppc32 at this stage, it
+        * all goes through PCI
+        */
+       return 0;
+}
+
 #else  /* CONFIG_PPC64 */
 
 /*
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97..6357f2b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1626,3 +1626,73 @@ void __devinit pcibios_setup_phb_resources(struct 
pci_controller *hose)
 
 }
 
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)                                    \
+static int                                                             \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)   \
+{                                                                      \
+       return PCIBIOS_DEVICE_NOT_FOUND;                                \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                int len, u32 *val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                 int len, u32 val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+       .read = null_read_config,
+       .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+       static struct pci_bus bus;
+
+       if (hose == 0) {
+               printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+       }
+       bus.number = busnr;
+       bus.sysdata = hose;
+       bus.ops = hose? hose->ops: &null_pci_ops;
+       return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                   \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,   \
+                              int devfn, int offset, type value)       \
+{                                                                      \
+       return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),    \
+                                           devfn, offset, value);      \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, 
int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+                         int cap)
+{
+       return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c66..ebe9ef9 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -478,75 +478,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, 
unsigned long devfn)
        return result;
 }
 
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)                                    \
-static int                                                             \
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)   \
-{                                                                      \
-       return PCIBIOS_DEVICE_NOT_FOUND;                                \
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-                int len, u32 *val)
-{
-       return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-                 int len, u32 val)
-{
-       return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-       .read = null_read_config,
-       .write = null_write_config,
-};
 
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-       static struct pci_bus bus;
-
-       if (hose == 0) {
-               hose = pci_bus_to_hose(busnr);
-               if (hose == 0)
-                       printk(KERN_ERR "Can't find hose for PCI bus %d!\n", 
busnr);
-       }
-       bus.number = busnr;
-       bus.sysdata = hose;
-       bus.ops = hose? hose->ops: &null_pci_ops;
-       return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                   \
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,   \
-                              int devfn, int offset, type value)       \
-{                                                                      \
-       return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),    \
-                                           devfn, offset, value);      \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, 
int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
-                         int cap)
-{
-       return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
-- 
1.6.0.6

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to