fixed the following errors:
Error: arch/powerpc/boot/dts/p1025rdb.dtsi:326.2-3 label or path, 'qe',
not found
Error: arch/powerpc/boot/dts/fsl/p1021si-post.dtsi:242.2-3 label or
path, 'qe', not found
FATAL ERROR: Syntax error parsing input tree
Signed-off-by: Zhicheng Fan <[email protected]>
---
arch/powerpc/boot/dts/p1025rdb_36b.dts | 48 ++++++++++++++++++++++++++++++++
1 files changed, 48 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts
b/arch/powerpc/boot/dts/p1025rdb_36b.dts
index 4ce4bfa..c74c39b 100644
--- a/arch/powerpc/boot/dts/p1025rdb_36b.dts
+++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts
@@ -82,6 +82,54 @@
0x0 0x100000>;
};
};
+
+ qe: qe@fffe80000 {
+ ranges = <0x0 0xf 0xffe80000 0x40000>;
+ reg = <0xf 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ status = "disabled"; /* no firmware loaded */
+
+ enet3: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ rx-clock-name = "clk12";
+ tx-clock-name = "clk9";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "mii";
+ };
+
+ mdio@2120 {
+ qe_phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1 0 0>;
+ reg = <0x6>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
+ interrupts = <5 1 0 0>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet4: ucc@2400 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ rx-clock-name = "none";
+ tx-clock-name = "clk13";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rmii";
+ };
+ };
+
};
/include/ "p1025rdb.dtsi"
--
1.7.0.4
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
