The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.
Signed-off-by: Kevin Hao <haoke...@gmail.com>
Acked-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Acked-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
drivers/video/fbdev/aty/aty128fb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/aty/aty128fb.c
b/drivers/video/fbdev/aty/aty128fb.c
index aedf2fbf9bf6..0156954bf340 100644
--- a/drivers/video/fbdev/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -965,7 +965,7 @@ static void __iomem *aty128_find_mem_vbios(struct
aty128fb_par *par)
/* fill in known card constants if pll_block is not available */
static void aty128_timings(struct aty128fb_par *par)
{
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC
/* instead of a table lookup, assume OF has properly
* setup the PLL registers and use their values
* to set the XCLK values and reference divider values */
@@ -979,7 +979,7 @@ static void aty128_timings(struct aty128fb_par *par)
if (!par->constants.ref_clk)
par->constants.ref_clk = 2950;
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC
x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV);
xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7;
Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8;
--
2.1.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
