On Tue, 2008-06-24 at 12:32 -0500, Kumar Gala wrote: > On Jun 24, 2008, at 12:17 PM, Bizhan Gholikhamseh (bgholikh) wrote: > > > HI all, > > Has anyone tried using a Graphic card on Freescale MPC837x-rdb > > board? If so I appreciate any hints and information that I can use. > > Nope, but you'll most likely need some form of x86 emulation for the > video bios init.
Yup. There's something in u-boot, though I don't know how well it works with newer cards. if it's based on x86emu tho, it might be worth looking at backporting some of the recent fixes/additions (such as bswap and rtdsc instructions support) to it. Once you get the card bootstrapped... I've been working lately with Dave Airlie to get the X radeon driver work on powerpc (ie endian fixes) on r5xx and r6xx cards. It should already work with older cards. The new cards use some "interesting" interface to various tables & pseudo-code scripts in the cards ROM (called AtomBios) and the code for that, contributed by ATI, has serious endian bugs which I'm working on fixing as we speak. For nvidia, you can use the free "nv" driver which provides some level of 2D acceleration and mode setting but no more. Or you may want to try the reverse engineered "nouveau" drivers whose level of features might or might not suit you depending on what you need and what card model you have. There's some work on getting recent XGI cards (such has XP 10) to work as well, though there are still issues with the driver. It mostly depends on what features you need. If you can get ATI to sell you an "embedded" chip using one of their old families (r1xx/2xx or even 3xx) it's likely to just work provided you can bootstrap it. Finally, in the ATI case (and to some extend nVidia but I don't know how well that works), the card can also be bootstrapped without an x86 BIOS emulation using some of those "scripts" in the ROM. This should be working with the ATI AtomBios (r5xx/6xx) once I'm done with it, and we have some code for older ATI BIOSes too but I haven't tried it and so it might well not work (it's more tricky for various reasons). This code can fairly easily be pulled out of the X server if you want your firmware to be able to bootstrap the cards earlier. I have no info about other card vendors. Cheers, Ben. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev