Thank you Michael and also Ming for your help! I modified my design according Michael's files and compiled everything. But with my 2.4.20 MontaVista-Kernel and the XILINX BSP-software 'No PHY detected. Assuming a PHY at address 0.' errormessage is printed out and because of that a wrong speed (10Mbits) is set. I have to find out now why the PHY is not detected. I assume that only the GMII interface is used for that. Am I right?
Thomas >>I have a plb_temac-design based on XAPP902 demodesign running. It's >>based on plb_temac version 2.00.a and hard_temac version 1.00.a. >>I tried to update to version 3.00 manually, because of incompatibility >>for automatic update. >>Up to now without success. >>Can somebody help me with a copy of .mhs and .ucf files, where the >>interface to the PHY and the PPC is correct? > >They're largish so I put copies of the ones I used with the ml403 on my >web server, look for: > >http://www.xyz.com/system.ucf >http://www.xyz.com/system.mhs > >I didn't clean out other unrelated changes. > >-michael -- Thomas Denzinger LesaMetric GmbH Hauptstrasse 46 35649 Bischoffen Tel.: 06444/931928 Fax : 06444/931912 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
