I'm using an app note that came with the BDI-2000. The app note is Number 02-001.
Unless the app note is completely wrong then I am missing something. The steps I take depicted below are exactly the same as in the app note. Jerry -----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-linuxppc-embedded at lists.linuxppc.org]On Behalf Of Wolfgang Denk Sent: Thursday, March 13, 2003 4:18 PM To: jwalden at digitalatlantic.com Cc: linuxppc-embedded at lists.linuxppc.org Subject: Re: Using BDI-2000 to debug kernel In message <EGEGIJHKDKJGAJMGIDPNKEEBCJAA.jwalden at digitalatlantic.com> you wrote: > > I am having a strange problem trying to single step through the kernel. Maybe this is because you are doing strange things? ;-) > BDI>md 0x00210000 > 00210000 : 7c7f1b78 7c9e2378 7cbd2b78 7cdc3378 |..x|.#x|.+x|.3x > 00210010 : 7cfb3b78 3b000000 48002359 38001032 |.;x;...H.#Y8..2 ... Why did you load the kernel at this address? You are aware that the Linux kernel expects to be loaded to asnd started at 0x0 ? > I disassembled head_4xx.o and so far this looks fine: > head_4xx.o: file format elf32-powerpc > > Disassembly of section .text: > > 00000000 <_start>: > 0: 7c 7f 1b 78 mr r31,r3 > 4: 7c 9e 23 78 mr r30,r4 > 8: 7c bd 2b 78 mr r29,r5 > c: 7c dc 33 78 mr r28,r6 > 10: 7c fb 3b 78 mr r27,r7 > 14: 3b 00 00 00 li r24,0 > 18: 48 00 23 59 bl 2370 <initial_mmu> You disassembled this code. Pleasy try to understand what it does! It start's saving some registers (r3...r7). Guess why? Because they contain parameters that must be passed to the Linux kernel. For a description of the parameters see "arch/ppc/kernel/head_4xx.S". > BDI>go What makes you think you can start a Linux kernel by just jumping to it at a random address, without passing correct arguments to it? > I get an exception indicating that an invalid opcode was fetched. > I can't figure out what to try next - Any ideas? Use a boot loader to start the Linux kernel - this way you can be sure that the kernel gets loaded to the correct address, that the registers contain the correct arguments, etc. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The use of anthropomorphic terminology when dealing with computing systems is a symptom of professional immaturity. -- Edsger Dijkstra ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
