This is an automatic generated email to let you know that the following patch were queued at the http://git.linuxtv.org/media_tree.git tree:
Subject: [media] stv090x: 22kHz workaround must also be performed for the 2nd frontend Author: Oliver Endriss <[email protected]> Date: Mon Jan 10 06:36:24 2011 -0300 22kHz workaround must also be performed for the 2nd frontend. Signed-off-by: Oliver Endriss <[email protected]> Signed-off-by: Manu Abraham <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> drivers/media/dvb/frontends/stv090x.c | 26 +++++++++++--------------- 1 files changed, 11 insertions(+), 15 deletions(-) --- http://git.linuxtv.org/media_tree.git?a=commitdiff;h=f235ff427e5a7c1274e161b04ca2d07c3d8c8b08 diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c index e3442a1..d3362d0 100644 --- a/drivers/media/dvb/frontends/stv090x.c +++ b/drivers/media/dvb/frontends/stv090x.c @@ -4696,10 +4696,6 @@ static int stv090x_setup(struct dvb_frontend *fe) if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0) goto err; - /* workaround for stuck DiSEqC output */ - if (config->diseqc_envelope_mode) - stv090x_send_diseqc_burst(fe, SEC_MINI_A); - return 0; err: dprintk(FE_ERROR, 1, "I/O error"); @@ -4784,11 +4780,6 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, state->internal = temp_int->internal; state->internal->num_used++; dprintk(FE_INFO, 1, "Found Internal Structure!"); - dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x", - state->device == STV0900 ? "STV0900" : "STV0903", - demod, - state->internal->dev_ver); - return &state->frontend; } else { state->internal = kmalloc(sizeof(struct stv090x_internal), GFP_KERNEL); @@ -4799,15 +4790,20 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config, state->internal->i2c_adap = state->i2c; state->internal->i2c_addr = state->config->address; dprintk(FE_INFO, 1, "Create New Internal Structure!"); - } - mutex_init(&state->internal->demod_lock); - mutex_init(&state->internal->tuner_lock); + mutex_init(&state->internal->demod_lock); + mutex_init(&state->internal->tuner_lock); - if (stv090x_setup(&state->frontend) < 0) { - dprintk(FE_ERROR, 1, "Error setting up device"); - goto error; + if (stv090x_setup(&state->frontend) < 0) { + dprintk(FE_ERROR, 1, "Error setting up device"); + goto error; + } } + + /* workaround for stuck DiSEqC output */ + if (config->diseqc_envelope_mode) + stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A); + dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x", state->device == STV0900 ? "STV0900" : "STV0903", demod, _______________________________________________ linuxtv-commits mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
