Hi Gadi,
I really appreciate the help, and I'm not complaining, I'm just frustrated by
my 2/3 tries at a thin client failing.
> > The documentation advises XRANDR_MODE_ instead, but that wont have any
> > effect unless X_VIRTUAL or X_VIRTUAL_AUTO are correctly set and then it
> > sets the virtual size not the monitor resolution.
> >
>
> 1. This is not true at all, you are not reading the code correctly.
> XRANDR_MODE_ will work even without X_VIRTUAL or X_VIRTUAL_AUTO
> (these are for multimonitor support). If it does not work for
> you, it is some other configuration problem.
[jupiter] /opt/ltsp/i386/usr/share/ltsp/screen-session.d [54]% grep XRAND *
README:# XRANDR, and evdev/hal, there remain a few things that may need to be
XS80-x-modes: if boolean_is_true "$XRANDR_DISABLE" ; then
XS85-virtual:# will be calculated from XRANDR_MODEs set
XS85-virtual: eval XRANDR_MODE=\$XRANDR_MODE_${i}
XS85-virtual: XRANDR_MODE=`echo $XRANDR_MODE | sed "s/ .*//g"`
XS85-virtual: if [ -n "$XRANDR_MODE" ]; then
XS85-virtual: VERTICAL=`echo $XRANDR_MODE | cut -d x -f 1`
XS85-virtual: HORIZONTAL=`echo $XRANDR_MODE | cut -d x -f
2`
[jupiter] /opt/ltsp/i386/usr/share/ltsp/screen-session.d [55]%
XS80-x-modes deals with X_MODE_
and XS85-virtual
if [ -n "${X_VIRTUAL}" ] || boolean_is_true "${X_VIRTUAL_AUTO}" ;then
display_hacks="$display_hacks x_virtual"
...
> > Finally even xorg does not play fair: after much looking I get ...
> > r...@ws09:~# cat /var/run/ltsp-xorg.conf
> > Section "Screen"
> > Identifier "Screen0"
> > SubSection "Display"
> > Modes "1280x1024"
> > EndSubSection
> > EndSection
> >
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SAM Model: 1e1 Serial#: 1212231993
(II) NV(0): Year: 2006 Week: 27
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[snip]
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
The monitor EDID is not the problem
This one gets to run 35K at 79Hz !!!
Despite
[00:22:15:d3:70:ed]
SERVER = "192.168.5.74"
XSERVER = "nv"
XRANDR_DISABLE = True
X_MODE_0 = 1280x1024
X_HORIZSYNC = 40-70
X_VERTREFRESH = 59-61
> If you are still not getting the mode you are looking for, it is most
> likely that your monitor does not report its sync frequencies. Try:
>
> X_HORZSYNC = "30-100"
> X_VERTREFRESH = "55-75"
> If that does not work, post the log file. The log file tells all.
The complete logfile is here http://tigger.ws/downloads/Xorg.7.log
(I trust that's more polite than posting the whole log file)
James
------------------------------------------------------------------------------
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating opportunities for Conference
attendees to learn about information security's most important issues through
interactions with peers, luminaries and emerging and established companies.
http://p.sf.net/sfu/rsaconf-dev2dev
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
