Thanks for the replies. The map you produced, Jeff, looks as it should.
However, I am trying to make an ocean model grid, and so I require two 2d
arrays of lon and lat, at my desired grid spacing. This is why I try the
steps:
dl = 20000.
nx = int((M.xmax - M.xmin) / dl) + 1
ny = int((M.ymax - M.ymin) / dl) + 1
lonr, latr = M.makegrid(nx, ny) <- it seems to be here that it loses
'memory' of omerc projection that I specified, and maybe there is a bug
here?
If you have matlab, the following lines do what I am looking for:
incx = 0.00310/2;
incy = 0.00306/2;
Xstr = -0.275;
Xend = 0.275;
Ystr = 0.17;
Yend = 0.8;
X = [Xstr:incx:Xend];
Y = [Ystr:incy:Yend];
[XX,YY] = meshgrid(X,Y);
[Lonr,Latr] = m_xy2ll(XX,YY);
m_proj('Oblique Mercator','lon',[-23.75
-28.25],'lat',[45.511],'direction','vertical');
plot(Lonr, Latr, 'c.')
-Evan
On Feb 13, 2008 5:14 AM, Jeff Whitaker <[EMAIL PROTECTED]> wrote:
> Evan Mason wrote:
> > Hi, I am having some problems using the oblique mercator projection in
> > basemap. I want to define a rectangular orthogonal grid, rotated
> > clockwise by about 13 degrees. I want to define grid cells of size,
> > say, about 20x20 km. The script I have so far is below. The problem
> > is that at some point (the makegrid step) I lose the rotation, as seen
> > in the plot.
> >
> > I'd appreciate any help with this, thanks, Evan
> >
> >
> > from matplotlib.toolkits.basemap import Basemap
> >
> > M = Basemap(projection = 'omerc', \
> > resolution = None, \
> > llcrnrlon = -43.7, \
> > llcrnrlat = 14.7, \
> > urcrnrlon = -4.0, \
> > urcrnrlat = 41.9, \
> > lat_2 = 11.0, \
> > lat_1 = 45.5, \
> > lon_2 = -27.8, \
> > lon_1 = -19.9)
> >
> > dl = 20000.
> > nx = int((M.xmax - M.xmin) / dl) + 1
> > ny = int((M.ymax - M.ymin) / dl) + 1
> >
> > lonr, latr = M.makegrid(nx, ny)
> >
> > plot(lonr, latr, 'c.')
> > show()
>
> Evan: I have to admit, I'm not too familiar with the Oblique Mercator
> projection. What exactly should it look like?
>
> If I plot
>
> M = Basemap(projection = 'omerc', \
> resolution = 'l', \
> llcrnrlon = -43.7, \
> llcrnrlat = 14.7, \
> urcrnrlon = -4.0, \
> urcrnrlat = 41.9, \
> lat_2 = 11.0, \
> lat_1 = 45.5, \
> lon_2 = -27.8, \
> lon_1 = -19.9)
> M.drawcoastlines()
> M.drawparallels(arange(10,51,10))
> M.drawmeridians(arange(-50,1,10))
> M.show()
>
> I see a reasonable looking map, but then I don't really know exactly
> what to expect.
>
> It seems that there are two ways to specify oblique mercator in proj4
>
> 1) by specifying 2 points (lon1,lat1), (lon2,lat2) along the central line
> 2) by specifying a central point and an azimuth that passes through the
> central point.
>
> Basemap uses (1), but every example on the web I've seen uses (2). It
> could be there are bugs in (1), and (2) would produce more reasonable
> results in your case. If you can give me an example of what your map
> *should* look like, it would help a lot.
>
> -Jeff
>
>
>
>
> --
> Jeffrey S. Whitaker Phone : (303)497-6313
> NOAA/OAR/CDC R/PSD1 FAX : (303)497-6449
> 325 Broadway Boulder, CO, USA 80305-3328
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Matplotlib-users mailing list
Matplotlib-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/matplotlib-users