Are you missing the icons as soon as the wim boots up? Can you manually load the wim and see if it loads? I assume you are using the standard VLSC wim?
-----Original Message----- From: Chandler, Garrett W [gchand...@dentonisd.org<mailto:gchand...@dentonisd.org>] Sent: Monday, January 05, 2015 08:48 PM Eastern Standard Time To: mdtosd@lists.myitforum.com Subject: Re: [MDT-OSD] RE: No IE shortcuts with Win8.1 B&C Thanks for the reply and info. I'll dig deeper into that. To clarify, it is a Build and Capture task sequence, as I'm building the reference image. So it's not joining to a domain and no group policies are being applied. Not a production deployment just yet! Thanks, Garrett ________________________________ From: listsad...@lists.myitforum.com <listsad...@lists.myitforum.com> on behalf of Keith Garner <keith.gar...@hotmail.com> Sent: Monday, January 5, 2015 5:19 PM To: mdtosd@lists.myitforum.com Subject: RE: [MDT-OSD] RE: No IE shortcuts with Win8.1 B&C I have never seen that problem myself. Sounds like some Active Setup problems. http://blogs.msdn.com/b/askie/archive/2012/09/13/things-to-do-when-troubleshooting-internet-explorer-terminal-server-and-profiles.aspx It’s not clear to me from the post below If this is a problem within the Build and Capture process itself, or with the image deployed in production. Perhaps you have some Antivirus antimalware or other Group Policy definitions that are blocking Active Setup per user. First thing I would do is try a deployment without joining a domain and without AV. -k From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Chandler, Garrett W Sent: Monday, January 5, 2015 2:37 PM To: mdtosd@lists.myitforum.com Subject: [MDT-OSD] RE: No IE shortcuts with Win8.1 B&C Interestingly, running this command C:\Windows\System32\ie4uinit.exe –UserIconConfig threw the shortcut into the Apps panel (I was actually able to search for it then) and then I was able to pin it to the Start Screen and the taskbar. But obviously that should not have been the case. Keith, no it did not exist in that location until I ran the above command. Anyone have any clues as to why it would disappear? I thought maybe the Browser choice update got installed, but I exclude that KB in the customsettings.ini. Thanks, Garrett Chandler From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Chandler, Garrett W Sent: Monday, January 5, 2015 3:03 PM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: [MDT-OSD] RE: No IE shortcuts with Win8.1 B&C I am not using CopyProfile in the unattend, and yes the patch level for IE 11 is 11.0.015. Thanks, Garrett Chandler From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Daniel Ratliff Sent: Monday, January 5, 2015 1:39 PM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: [MDT-OSD] RE: No IE shortcuts with Win8.1 B&C Are you using CopyProfile in your unattend? Can you verify the IE patch level? 11.0.15? Daniel Ratliff From:listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Chandler, Garrett W Sent: Monday, January 05, 2015 2:32 PM To: mdtosd@lists.myitforum.com<mailto:mdtosd@lists.myitforum.com> Subject: [MDT-OSD] No IE shortcuts with Win8.1 B&C Hi all, I am running a B&C TS for Windows 8.1 x86. It’s the latest download from MVLS. I have a Suspend action in the task sequence to verify everything before I sysprep and capture. I’m running into an issue where there are no default shortcuts for Internet Explorer 11, like in the task bar and the Start Screen. I can still access iexplore.exe through Program Files. This does not occur on the x64 TS, even though they are the same, outside of the actual operating system being applied. Has anyone seen anything similar before and resolved it? I found Jason Sandy’s article written here, but the VBScript did not resolve this for me. Admittedly, I’m not fluent in VB, so if something needs to be modified or updated to work on Win8.1, maybe someone can point me into the right direction? http://myitforum.com/cs2/blogs/jsandys/archive/2011/06/25/osd-and-runonce.aspx Any thoughts or tips would be appreciated. I searched through the mailing list for this issue, since my joining at least, and didn’t see the question arise. Hopefully this isn’t a “duplicate” email for most of you. Thanks, Garrett Chandler Systems Management Specialist Denton Independent School District 1212 North Elm Street | Denton, Texas 76201 Office: (940) 369-0120 | Fax: (940) 369-4989 gchand...@dentonisd.org<mailto:gchand...@dentonisd.org> The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
