Hi Yong,
one of the things that has been bugging me a bit lately is how much
printk spew the camera drivers give in dmesg;
it's not a huge deal, just a minor irritation, but it made me look into
the source code.
the patch below tries to improve the camera debug functionality by using
the linux kernel standard debug mechanism
(pr_debug and dev_dbg() ), which allows for runtime tuning of the
print/debug levels and also has the benefit of working
automatically well with diagnostic tools (because of a standard leading
format header).
Please review the patch and consider integrating it into your source
code; I think it makes the driver better and more of a linux
driver.
From: Arjan van de Ven <ar...@linux.intel.com>
Subject: mrstov5640: use linux debug print mechanism
The ov5640 driver invented its own dprintk() abstraction rather than
using the standard linux pr_debug/dev_dbg
mechanism. This patch switches the driver to the standard mechanism,
which allows the debugging to be used
by automatic analysis and diagnostic tools.
Signed-off-by: Arjan van de Ven <ar...@linux.intel.com>
diff --git a/drivers/staging/mrstci/mrstov5640/mrstov5640.c
b/drivers/staging/mrstci/mrstov5640/mrstov5640.c
index 375f609..b27f94e 100644
--- a/drivers/staging/mrstci/mrstov5640/mrstov5640.c
+++ b/drivers/staging/mrstci/mrstov5640/mrstov5640.c
@@ -24,6 +24,8 @@
* Yong He <yong.m...@intel.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
@@ -50,10 +52,6 @@
#define DRIVER_VERSION "0.942"
-static int mrstov5640_debug=5;
-module_param(mrstov5640_debug, int, 0644);
-MODULE_PARM_DESC(mrstov5640_debug, "Debug level (0-1)");
-
#define GPIO_FLASH 45
static int ov5640_flash=0;
@@ -61,19 +59,8 @@ static int ov5640_flash=0;
#define V4L2_CID_FLASH_STROBE
(V4L2_CID_CAMERA_CLASS_BASE+17)
#endif
-#define dprintk(level, fmt, arg...) do { \
- if (mrstov5640_debug >= level) \
- printk(KERN_DEBUG "ov5640@%s: " fmt "\n", \
- __func__, ## arg); } \
- while (0)
-
-#define eprintk(fmt, arg...) \
- printk(KERN_ERR "ov5640@%s: line %d: " fmt "\n", \
- __func__, __LINE__, ## arg);
-
-#define DBG_entering dprintk(2, "entering");
-#define DBG_leaving dprintk(2, "leaving");
-#define DBG_line dprintk(2, " line: %d", __LINE__);
+#define DBG_entering pr_debug("entering %s\n", __func__);
+#define DBG_leaving pr_debug("leaving %s\n", __func__);
static inline struct ci_sensor_config *to_sensor_config(struct
v4l2_subdev *sd)
{
@@ -244,7 +231,7 @@ static int ov5640_read(struct i2c_client *c, u16
reg, u8 *value)
*value = ret_val;
ret = (ret == 2) ? 0 : -1;
- dprintk( 4, " && ov5640_read \t\t\t(0x%04x) ------>
0x%02x",reg,*value);
+ dev_dbg(&c->adapter->dev, "ov5640_read \t\t\t(0x%04x) ------>
0x%02x\n", reg, *value);
return ret;
}
@@ -272,7 +259,7 @@ static int ov5640_write(struct i2c_client *c, u16
reg, u8 value)
if (reg == 0x3008 && (value & 0x80))
msleep(3);
ret = (ret == 1) ? 0 : -1;
- dprintk( 4, "&& ov5640_write \t\t\t(0x%04x) <------ 0x%02x",reg,value);
+ dev_dbg(&c->adapter->dev, "ov5640_write \t\t\t(0x%04x) <------
0x%02x\n", reg, value);
return ret;
}
@@ -346,7 +333,7 @@ static int ov5640_hw_init (struct i2c_client *c)
/* Set registers into default config value */
ret = ov5640_write_array(c, ov5640_def_reg);
- dprintk( 1, "[ov5640-wr-reg] <----------- load ov5640 default
settings\n");
+ dev_dbg(&c->adapter->dev, "[ov5640-wr-reg] <----------- load ov5640
default settings\n");
/* turn on AGC/AEC */
ret += ov5640_write(c, 0x3503, 0x0);
ov5640_set_data_pin_in(c);
@@ -377,22 +364,23 @@ static void ov5640_standby(struct v4l2_subdev *sd)
ov5640_status.reg_inited = OV5640_REG_RESET;
spin_unlock_irqrestore(&ov5640_status.state_lock, flags);
- dprintk(1, "PM: ov5640 standby called\n");
+ dev_dbg(&c->adapter->dev, "PM: ov5640 standby called\n");
}
static void ov5640_wakeup(struct v4l2_subdev *sd, int hw_reinit)
{
unsigned long flags;
- dprintk(1, "PM: ov5640 wakeup called\n");
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+
+ dev_dbg(&c->adapter->dev, "PM: ov5640 wakeup called\n");
spin_lock_irqsave(&ov5640_status.state_lock, flags);
if (ov5640_status.power == OV5640_POWER_OFF) {
ov5640_status.power = OV5640_POWER_ON;
spin_unlock_irqrestore(&ov5640_status.state_lock, flags);
- dprintk(1, "PM: ov5640 switch OFF to ON.\n");
+ dev_dbg(&c->adapter->dev, "PM: ov5640 switch OFF to ON.\n");
gpio_set_value(GPIO_STDBY_PIN, 0);
if (hw_reinit) {
- struct i2c_client *c = v4l2_get_subdevdata(sd);
ov5640_hw_init(c);
ov5640_restore_hw_status(c);
}
@@ -476,7 +464,7 @@ static int ov5640_try_res(u32 *w, u32 *h)
struct ov5640_res_struct *res_index, *p = NULL;
int dis, last_dis = ov5640_res->width + ov5640_res->height;
- dprintk(1, "&&&&& before %dx%d", *w, *h);
+ pr_debug("&&&&& before %dx%d", *w, *h);
for (res_index = ov5640_res;
res_index < ov5640_res + N_RES;
res_index++) {
@@ -509,7 +497,7 @@ static int ov5640_try_res(u32 *w, u32 *h)
*w = res_index->width;
*h = res_index->height;
- dprintk(1, "&&&&& after %dx%d", *w, *h);
+ pr_debug("&&&&& after %dx%d", *w, *h);
return 0;
}
@@ -533,11 +521,13 @@ static int ov5640_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt)
{
int ret = 0;
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+
DBG_entering;
- dprintk(1, "&&&&& before %dx%d", fmt->width,
+ dev_dbg(&c->adapter->dev, "&&&&& before %dx%d", fmt->width,
fmt->height);
ret = ov5640_try_res(&fmt->width, &fmt->height);
- dprintk(1, "&&&&& after %dx%d", fmt->width,
+ dev_dbg(&c->adapter->dev, "&&&&& after %dx%d", fmt->width,
fmt->height);
DBG_leaving;
return ret;
@@ -648,8 +638,8 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
ov5640_status.current_res_i = target_res_index;
spin_unlock_irqrestore(
&ov5640_status.state_lock, flags);
- dprintk( 3, "[ov5640-wr-reg] <----------- changing res from
index-%d to index-%d (%dx%d)", ov5640_status.current_res_i,
target_res_index,width, height);
- dprintk( 3, "[ov5640-wr-reg] <----------- Set resolutiojn
Configs");
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- changing res from index-%d to index-%d (%dx%d)",
ov5640_status.current_res_i, target_res_index, width, height);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- Set resolution Configs");
ov5640_save_hw_status(client);
ret += ov5640_write_array(client, res_index->regs);
ov5640_restore_hw_status(client);
@@ -657,7 +647,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
else {
spin_unlock_irqrestore(
&ov5640_status.state_lock, flags);
- dprintk(3, "[ov5640-wr-reg] <----------- same res index-%d
(%dx%d)", target_res_index,width, height);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- same res index-%d (%dx%d)", target_res_index, width, height);
}
/* Marked current sensor res as being "used" */
@@ -671,7 +661,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
}
for (index = 0; index < N_RES; index++)
- dprintk(2, "index = %d, used = %d\n", index,
+ dev_dbg(&client->adapter->dev, "index = %d, used = %d\n",
index,
ov5640_res[index].used);
}
@@ -1042,13 +1032,13 @@ static int ov5640_s_stream(struct v4l2_subdev
*sd, int enable)
struct i2c_client *client = v4l2_get_subdevdata(sd);
DBG_entering;
- dprintk( 1, "[ov5640-wr-reg] <----------- ov5640: s_stream %d
\n",enable);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg] <-----------
ov5640: s_stream %d\n", enable);
if (enable) {
unsigned char v;
ov5640_read(client, 0x3008, &v);
if ((v & 0xff) != 0x02) {
- dprintk( 1, "[ov5640-wr-reg] <----------- set stream on,
sleep 300 ms for sensor adjusting...\n");
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- set stream on, sleep 300 ms for sensor adjusting...\n");
ov5640_write(client, 0x3008, 0x02);
msleep(300);
}
@@ -1085,11 +1075,14 @@ static int ov5640_enum_frameintervals(struct
v4l2_subdev *sd,
{
unsigned int index = fival->index;
unsigned int res_index;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+
DBG_entering;
res_index = find_OV5640_res_index(fival->width, fival->height);
- dprintk( 1, "find res index %d (%dx%d)\n",res_index,fival->width,
fival->height);
+ dev_dbg(&client->adapter->dev, "find res index %d (%dx%d)\n",
res_index, fival->width, fival->height);
if (res_index >= N_RES)
return -EINVAL;
@@ -1112,7 +1105,7 @@ static int ov5640_enum_frameintervals(struct
v4l2_subdev *sd,
fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
fival->discrete.numerator = 1;
fival->discrete.denominator = ov5640_res[res_index].fps[index];
- dprintk( 1, "find FPS index-%d
(%d)\n",index,fival->discrete.denominator);
+ dev_dbg(&client->adapter->dev, "find FPS index-%d (%d)\n", index,
fival->discrete.denominator);
DBG_leaving;
@@ -1133,7 +1126,7 @@ static int ov5640_s_parm(struct v4l2_subdev *sd,
struct v4l2_streamparm *param){
if (target_fps ==
ov5640_res[ov5640_status.current_res_i].fps[fps_i]) {
/* found the target fps*/
u8 val;
- dprintk( 1, "set sensor FPS to %d\n", target_fps);
+ dev_dbg(&client->adapter->dev, "set sensor FPS to
%d\n", target_fps);
ov5640_read(client, 0x3008, &val);
if (val == 0x02) ov5640_s_stream(sd, 0);
@@ -1146,12 +1139,12 @@ static int ov5640_s_parm(struct v4l2_subdev *sd,
struct v4l2_streamparm *param){
}
}
if (fps_i >= OV5640_N_FPS) {
- dprintk( 1, "Warning!! target FPS %d/%d is not found in
sensor supported table.\n",
+ dev_dbg(&client->adapter->dev, "Warning!! target FPS %d/%d
is not found in sensor supported table.\n",
param->parm.capture.timeperframe.denominator,
param->parm.capture.timeperframe.numerator);
return -EINVAL;
}
} else {
- dprintk( 1, "Warning!! current_res (%d) is not used??\n",
+ dev_dbg(&client->adapter->dev, "Warning!! current_res (%d) is
not used??\n",
ov5640_status.current_res_i);
}
@@ -1189,7 +1182,7 @@ static int ov5640_s_register(struct v4l2_subdev *sd,
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- dprintk( 1, "[ov5640-wr-reg] <----------- ov5640_s_register 0x%04x
(0x%02x)\n",
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg] <-----------
ov5640_s_register 0x%04x (0x%02x)\n",
(unsigned int)(reg->reg & 0xffff),(unsigned int)(reg->val
& 0xff));
ov5640_write(client, reg->reg & 0xffff, reg->val & 0xff);
return 0;
diff --git a/drivers/staging/mrstci/mrstov5640/mrstov5640.c
b/drivers/staging/mrstci/mrstov5640/mrstov5640.c
index 375f609..b27f94e 100644
--- a/drivers/staging/mrstci/mrstov5640/mrstov5640.c
+++ b/drivers/staging/mrstci/mrstov5640/mrstov5640.c
@@ -24,6 +24,8 @@
* Yong He <yong.m...@intel.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
@@ -50,10 +52,6 @@
#define DRIVER_VERSION "0.942"
-static int mrstov5640_debug=5;
-module_param(mrstov5640_debug, int, 0644);
-MODULE_PARM_DESC(mrstov5640_debug, "Debug level (0-1)");
-
#define GPIO_FLASH 45
static int ov5640_flash=0;
@@ -61,19 +59,8 @@ static int ov5640_flash=0;
#define V4L2_CID_FLASH_STROBE
(V4L2_CID_CAMERA_CLASS_BASE+17)
#endif
-#define dprintk(level, fmt, arg...) do { \
- if (mrstov5640_debug >= level) \
- printk(KERN_DEBUG "ov5640@%s: " fmt "\n", \
- __func__, ## arg); } \
- while (0)
-
-#define eprintk(fmt, arg...) \
- printk(KERN_ERR "ov5640@%s: line %d: " fmt "\n", \
- __func__, __LINE__, ## arg);
-
-#define DBG_entering dprintk(2, "entering");
-#define DBG_leaving dprintk(2, "leaving");
-#define DBG_line dprintk(2, " line: %d", __LINE__);
+#define DBG_entering pr_debug("entering %s\n", __func__);
+#define DBG_leaving pr_debug("leaving %s\n", __func__);
static inline struct ci_sensor_config *to_sensor_config(struct v4l2_subdev *sd)
{
@@ -244,7 +231,7 @@ static int ov5640_read(struct i2c_client *c, u16 reg, u8
*value)
*value = ret_val;
ret = (ret == 2) ? 0 : -1;
- dprintk( 4, " && ov5640_read \t\t\t(0x%04x) ------>
0x%02x",reg,*value);
+ dev_dbg(&c->adapter->dev, "ov5640_read \t\t\t(0x%04x) ------>
0x%02x\n", reg, *value);
return ret;
}
@@ -272,7 +259,7 @@ static int ov5640_write(struct i2c_client *c, u16 reg, u8
value)
if (reg == 0x3008 && (value & 0x80))
msleep(3);
ret = (ret == 1) ? 0 : -1;
- dprintk( 4, "&& ov5640_write \t\t\t(0x%04x) <------ 0x%02x",reg,value);
+ dev_dbg(&c->adapter->dev, "ov5640_write \t\t\t(0x%04x) <------
0x%02x\n", reg, value);
return ret;
}
@@ -346,7 +333,7 @@ static int ov5640_hw_init (struct i2c_client *c)
/* Set registers into default config value */
ret = ov5640_write_array(c, ov5640_def_reg);
- dprintk( 1, "[ov5640-wr-reg] <----------- load ov5640 default
settings\n");
+ dev_dbg(&c->adapter->dev, "[ov5640-wr-reg] <----------- load ov5640
default settings\n");
/* turn on AGC/AEC */
ret += ov5640_write(c, 0x3503, 0x0);
ov5640_set_data_pin_in(c);
@@ -377,22 +364,23 @@ static void ov5640_standby(struct v4l2_subdev *sd)
ov5640_status.reg_inited = OV5640_REG_RESET;
spin_unlock_irqrestore(&ov5640_status.state_lock, flags);
- dprintk(1, "PM: ov5640 standby called\n");
+ dev_dbg(&c->adapter->dev, "PM: ov5640 standby called\n");
}
static void ov5640_wakeup(struct v4l2_subdev *sd, int hw_reinit)
{
unsigned long flags;
- dprintk(1, "PM: ov5640 wakeup called\n");
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+
+ dev_dbg(&c->adapter->dev, "PM: ov5640 wakeup called\n");
spin_lock_irqsave(&ov5640_status.state_lock, flags);
if (ov5640_status.power == OV5640_POWER_OFF) {
ov5640_status.power = OV5640_POWER_ON;
spin_unlock_irqrestore(&ov5640_status.state_lock, flags);
- dprintk(1, "PM: ov5640 switch OFF to ON.\n");
+ dev_dbg(&c->adapter->dev, "PM: ov5640 switch OFF to ON.\n");
gpio_set_value(GPIO_STDBY_PIN, 0);
if (hw_reinit) {
- struct i2c_client *c = v4l2_get_subdevdata(sd);
ov5640_hw_init(c);
ov5640_restore_hw_status(c);
}
@@ -476,7 +464,7 @@ static int ov5640_try_res(u32 *w, u32 *h)
struct ov5640_res_struct *res_index, *p = NULL;
int dis, last_dis = ov5640_res->width + ov5640_res->height;
- dprintk(1, "&&&&& before %dx%d", *w, *h);
+ pr_debug("&&&&& before %dx%d", *w, *h);
for (res_index = ov5640_res;
res_index < ov5640_res + N_RES;
res_index++) {
@@ -509,7 +497,7 @@ static int ov5640_try_res(u32 *w, u32 *h)
*w = res_index->width;
*h = res_index->height;
- dprintk(1, "&&&&& after %dx%d", *w, *h);
+ pr_debug("&&&&& after %dx%d", *w, *h);
return 0;
}
@@ -533,11 +521,13 @@ static int ov5640_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt)
{
int ret = 0;
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+
DBG_entering;
- dprintk(1, "&&&&& before %dx%d", fmt->width,
+ dev_dbg(&c->adapter->dev, "&&&&& before %dx%d", fmt->width,
fmt->height);
ret = ov5640_try_res(&fmt->width, &fmt->height);
- dprintk(1, "&&&&& after %dx%d", fmt->width,
+ dev_dbg(&c->adapter->dev, "&&&&& after %dx%d", fmt->width,
fmt->height);
DBG_leaving;
return ret;
@@ -648,8 +638,8 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
ov5640_status.current_res_i = target_res_index;
spin_unlock_irqrestore(
&ov5640_status.state_lock, flags);
- dprintk( 3, "[ov5640-wr-reg] <----------- changing res
from index-%d to index-%d (%dx%d)", ov5640_status.current_res_i,
target_res_index,width, height);
- dprintk( 3, "[ov5640-wr-reg] <----------- Set
resolutiojn Configs");
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- changing res from index-%d to index-%d (%dx%d)",
ov5640_status.current_res_i, target_res_index, width, height);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- Set resolution Configs");
ov5640_save_hw_status(client);
ret += ov5640_write_array(client, res_index->regs);
ov5640_restore_hw_status(client);
@@ -657,7 +647,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
else {
spin_unlock_irqrestore(
&ov5640_status.state_lock, flags);
- dprintk(3, "[ov5640-wr-reg] <----------- same res
index-%d (%dx%d)", target_res_index,width, height);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- same res index-%d (%dx%d)", target_res_index, width, height);
}
/* Marked current sensor res as being "used" */
@@ -671,7 +661,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
}
for (index = 0; index < N_RES; index++)
- dprintk(2, "index = %d, used = %d\n", index,
+ dev_dbg(&client->adapter->dev, "index = %d, used =
%d\n", index,
ov5640_res[index].used);
}
@@ -1042,13 +1032,13 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int
enable)
struct i2c_client *client = v4l2_get_subdevdata(sd);
DBG_entering;
- dprintk( 1, "[ov5640-wr-reg] <----------- ov5640: s_stream %d
\n",enable);
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg] <----------- ov5640:
s_stream %d\n", enable);
if (enable) {
unsigned char v;
ov5640_read(client, 0x3008, &v);
if ((v & 0xff) != 0x02) {
- dprintk( 1, "[ov5640-wr-reg] <----------- set stream
on, sleep 300 ms for sensor adjusting...\n");
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg]
<----------- set stream on, sleep 300 ms for sensor adjusting...\n");
ov5640_write(client, 0x3008, 0x02);
msleep(300);
}
@@ -1085,11 +1075,14 @@ static int ov5640_enum_frameintervals(struct
v4l2_subdev *sd,
{
unsigned int index = fival->index;
unsigned int res_index;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+
DBG_entering;
res_index = find_OV5640_res_index(fival->width, fival->height);
- dprintk( 1, "find res index %d (%dx%d)\n",res_index,fival->width,
fival->height);
+ dev_dbg(&client->adapter->dev, "find res index %d (%dx%d)\n",
res_index, fival->width, fival->height);
if (res_index >= N_RES)
return -EINVAL;
@@ -1112,7 +1105,7 @@ static int ov5640_enum_frameintervals(struct v4l2_subdev
*sd,
fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
fival->discrete.numerator = 1;
fival->discrete.denominator = ov5640_res[res_index].fps[index];
- dprintk( 1, "find FPS index-%d
(%d)\n",index,fival->discrete.denominator);
+ dev_dbg(&client->adapter->dev, "find FPS index-%d (%d)\n", index,
fival->discrete.denominator);
DBG_leaving;
@@ -1133,7 +1126,7 @@ static int ov5640_s_parm(struct v4l2_subdev *sd, struct
v4l2_streamparm *param){
if (target_fps ==
ov5640_res[ov5640_status.current_res_i].fps[fps_i]) {
/* found the target fps*/
u8 val;
- dprintk( 1, "set sensor FPS to %d\n",
target_fps);
+ dev_dbg(&client->adapter->dev, "set sensor FPS
to %d\n", target_fps);
ov5640_read(client, 0x3008, &val);
if (val == 0x02) ov5640_s_stream(sd, 0);
@@ -1146,12 +1139,12 @@ static int ov5640_s_parm(struct v4l2_subdev *sd, struct
v4l2_streamparm *param){
}
}
if (fps_i >= OV5640_N_FPS) {
- dprintk( 1, "Warning!! target FPS %d/%d is not found in
sensor supported table.\n",
+ dev_dbg(&client->adapter->dev, "Warning!! target FPS
%d/%d is not found in sensor supported table.\n",
param->parm.capture.timeperframe.denominator,
param->parm.capture.timeperframe.numerator);
return -EINVAL;
}
} else {
- dprintk( 1, "Warning!! current_res (%d) is not used??\n",
+ dev_dbg(&client->adapter->dev, "Warning!! current_res (%d) is
not used??\n",
ov5640_status.current_res_i);
}
@@ -1189,7 +1182,7 @@ static int ov5640_s_register(struct v4l2_subdev *sd,
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- dprintk( 1, "[ov5640-wr-reg] <----------- ov5640_s_register 0x%04x
(0x%02x)\n",
+ dev_dbg(&client->adapter->dev, "[ov5640-wr-reg] <-----------
ov5640_s_register 0x%04x (0x%02x)\n",
(unsigned int)(reg->reg & 0xffff),(unsigned
int)(reg->val & 0xff));
ov5640_write(client, reg->reg & 0xffff, reg->val & 0xff);
return 0;
_______________________________________________
MeeGo-kernel mailing list
MeeGo-kernel@lists.meego.com
http://lists.meego.com/listinfo/meego-kernel
