On Sun, Mar 30, 2003 at 09:58:15PM -0800, Eric Hahn wrote: > Daran wrote: > >Chris Marble wrote:
> Actually.... the .001 extension would be expected... especially > if running MPrime on a dual CPU box... with one instance using > the -A1 switch... Using the -A switch will put an extension > with the instance after it... No -A switch... no extension... OK. I've never used a Dual CPU Box. > However... to complete the P-1s... assuming they were initiated > by a L-L test... adding Pfactor=exponent,66 lines to the > WORK0001.INI would do it... no ,1 is needed... since it would > indicate the P-1 is complete... Not for Pfactor assignments it doesn't. Here's what undoc.txt says #You can do P-1 factoring by adding lines to worktodo.ini: # Pfactor=exponent,how_far_factored,has_been_LL_tested_once #For example, Pfactor=10000157,64,0 I have verified that this is correct. A '1' in the last place causes it to choose DC limits. One question: If Chris is going to finish them on a different - single CPU machine, would he have to remove the extension? > Eric Daran _________________________________________________________________________ Unsubscribe & list info -- http://www.ndatech.com/mersenne/signup.htm Mersenne Prime FAQ -- http://www.tasam.com/~lrwiman/FAQ-mers