I cut my irons with an MK-100 Brick Paver saw using .030 abrasive blades.
Not only are the blades super cheap, they also produce a very smooth cut
surface.
It takes longer to cut each slice but it saves material and I don't have to
sand out the deep band saw marks
-----------------------------------------------------------------------------------------------------------------------
I found these blades to be real junk and found absolutely no advantage to
using them especially for the higher price. Irons always seem to be best cut
with a band saw by an experienced technician.
Why cut a Nantan? You are asking for trouble....that sucker will likely rust
in front of your eyes!!
Matt Morgan
----------------------
Matt Morgan
Mile High Meteorites
http://www.mhmeteorites.com
P.O. Box 151293
Lakewood, CO 80215 USA
-----Original
Message----------------------------------------------------------------------------------------------------------------------------
From: David Pensenstadler <dfpens01 at yahoo.com>
Date: Fri, 23 Nov 2007 08:37:26
To:Meteorite List <meteorite-list at meteoritecentral.com>
Subject: [meteorite-list] Cutting meteorites with CBN blade
Dear List:
Does anyone have any experience with cutting irons
with a Cubic Boron Nitride blade?
I purchased a 10-inch Pro-Slicer (10 x 0.012) CBN
blade from Lapidary Discounts in California and used
it to cut a 2 1/2 inch Nantan. It worked very well
for the first 10 cuts, then, very quuckly, started to
bind up indicating that the CBN was gone from the
blade. For the cost I expected to get much longer
life from it.
Any opinions on what kind of a life one can expect
from such a blade. Altogether I cut about 22 linear
inches before the blade was useless.
I think I followed good cutting practices, using pella
oil for lubrication, and feeding at a rate of about 1
inch every 5 minutes (0.2 inch per minute).
Motor speed was 1750 rpm.
Any ideas?
Dave
______________________________________________
http://www.meteoritecentral.com
Meteorite-list mailing list
Meteorite-list@meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list
