There is something wrong with the configuration on that device.
Since that is an IPv6 address, I would start by looking at an interface that has an IPv6 connection that is configured incorrectly. I have not configured bonded ports on MT for OSPF, but I know that bridged ports need to have the configuration on the bridge and switch ports need to have the configuration on the master port.

On 4/23/2013 10:53 AM, Keith Barber wrote:
Good morning,

We had to switch on of our core routers from using a single port with vlans to 
using bonding.  This was because we were hitting the 1gig max for the port.  
Since that change we constantly see errors from ospf, many a second.  I 
modified the logging to at least not show them, but I have not had any luck 
fixing the problem.

This is one of the older x86 Mikronoc's with dual-core cpus.
It has been running v5.9 for at least 200 days, before we tried a reboot to see 
if it would fix ospf.

Has anybody come across this issue before?

Here is a log snippet:

10:38:51 system,info log rule changed by keith
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=208.84.198.9
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=208.84.198.25
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=208.84.198.230
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=fe80::260:e0ff:fe48:22fe
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=208.84.198.14
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=10.104.72.1
10:38:51 route,ospf,error Discarding packet: locally originated
10:38:51 route,ospf,error     src address=208.84.198.2
10:38:52 system,info log rule changed by keith

Bonding config:
0  R name="bonding1" mtu=1500 mac-address=00:60:E0:48:22:FE arp=enabled 
slaves=ether6,ether7 mode=balance-rr
       primary=none link-monitoring=none arp-interval=100ms mii-interval=100ms 
down-delay=0ms up-delay=0ms
       lacp-rate=30secs transmit-hash-policy=layer-2

The bond also has 8 vlans running off of it.

Thanks for the help.
-Keith-
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3272 / Virus Database: 3162/6267 - Release Date: 04/23/13



--
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration

Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060
(765) 439-4253
(855) 231-6239


_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to