I need some suggestions and/or help with a dual Intel Xeon 64 bit
motherboard/system.
I have this SuperMicro motherboard with dual xeon 3.2 ghz processors. It does
not boot with amd64 /bsd.mp [nothing after "sysbeep0 at pcppi0"], but does "ok"
with amd64 /bsd. The OpenBSD dmesg is after the first set of double rows of
78 character equals signs, and the linux dmesg is after the 2nd set of double
rows of equal signs (two different sets of disk drives -- with linux md raid).
Hoping that might give someone a hint at what is overlooked, or something that
I can try to get it working.
I tried adding in "one by one" the extra options that GENERIC.MP adds (hacks
needed to make it compile/link), and it appears that either the option
MULTIPROCESSOR or MPBIOS is the problem. About five hours spent on this
so far, and it is beginning to look like kernel print time to narrow it
farther down.
Any hints, or am I out of luck? [Hoping to use OpenBSD for next project.]
(Yes, there really are 16 ports of qlogic cards present.)
==============================================================================
==============================================================================
OpenBSD 3.8 (GENERIC) #246: Thu Sep 1 19:52:45 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3488657408 (3406892K)
avail mem = 2992001024 (2921876K)
using 22937 buffers containing 349073408 bytes (340892K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(TM) CPU 3.20GHz, 3200.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,LONG
cpu0: 1MB 64b/line 8-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0a
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 2
isp0 at pci2 dev 1 function 0 "QLogic ISP2312" rev 0x02: irq 5
isp0: Polled Mailbox Command (0x2) Timeout
isp0: Polled Mailbox Command (0x8) Timeout
isp1 at pci2 dev 1 function 1 "QLogic ISP2312" rev 0x02: irq 10
isp1: Polled Mailbox Command (0x2) Timeout
isp1: Polled Mailbox Command (0x8) Timeout
ahd0 at pci2 dev 2 function 0 "Adaptec AIC-7902B U320" rev 0x10: irq 5
aic7902: U320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsibus0 at ahd0: 16 targets
sd0 at scsibus0 targ 6 lun 0: <SEAGATE, ST336752LC, 0004> SCSI3 0/direct fixed
sd0: 35003MB, 18496 cyl, 8 head, 484 sec, 512 bytes/sec, 71687369 sec total
safte0 at scsibus0 targ 8 lun 0: <SUPER, GEM359 REV001, 1.09> SCSI2 3/processor
fixed
sd1 at scsibus0 targ 9 lun 0: <SEAGATE, ST336607LC, 0006> SCSI3 0/direct fixed
sd1: 35003MB, 49855 cyl, 2 head, 718 sec, 512 bytes/sec, 71687372 sec total
ahd1 at pci2 dev 2 function 1 "Adaptec AIC-7902B U320" rev 0x10: irq 10
aic7902: U320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
scsibus1 at ahd1: 16 targets
isp2 at pci2 dev 3 function 0 "QLogic ISP2312" rev 0x02: irq 5
isp2: Polled Mailbox Command (0x2) Timeout
isp2: Polled Mailbox Command (0x8) Timeout
isp3 at pci2 dev 3 function 1 "QLogic ISP2312" rev 0x02: irq 10
isp3: Polled Mailbox Command (0x2) Timeout
isp3: Polled Mailbox Command (0x8) Timeout
vendor "Intel", unknown product 0x0326 (class system subclass interrupt, rev
0x09) at pci1 dev 0 function 1 not configured
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 3
ppb3 at pci3 dev 1 function 0 "IBM PCIX-PCIX" rev 0x02
pci4 at ppb3 bus 4
isp4 at pci4 dev 4 function 0 "QLogic ISP2312" rev 0x02: irq 5
isp4: Polled Mailbox Command (0x2) Timeout
isp4: Polled Mailbox Command (0x8) Timeout
isp5 at pci4 dev 4 function 1 "QLogic ISP2312" rev 0x02: irq 10
isp5: Polled Mailbox Command (0x2) Timeout
isp5: Polled Mailbox Command (0x8) Timeout
isp6 at pci4 dev 6 function 0 "QLogic ISP2312" rev 0x02: irq 7
isp6: Polled Mailbox Command (0x2) Timeout
isp6: Polled Mailbox Command (0x8) Timeout
isp7 at pci4 dev 6 function 1 "QLogic ISP2312" rev 0x02: irq 11
isp7: Polled Mailbox Command (0x2) Timeout
isp7: Polled Mailbox Command (0x8) Timeout
em0 at pci3 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 7,
address: 00:30:48:20:dd:c2
em1 at pci3 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: irq 11,
address: 00:30:48:20:dd:c3
vendor "Intel", unknown product 0x0327 (class system subclass interrupt, rev
0x09) at pci1 dev 0 function 3 not configured
ppb4 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci5 at ppb4 bus 5
ppb5 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
ppb7 at pci7 dev 1 function 0 "IBM PCIX-PCIX" rev 0x02
pci8 at ppb7 bus 8
isp8 at pci8 dev 4 function 0 "QLogic ISP2312" rev 0x02pci_intr_map: no mapping
for pin B (line=ff)
: couldn't map interrupt
isp9 at pci8 dev 4 function 1 "QLogic ISP2312" rev 0x02pci_intr_map: no mapping
for pin C (line=ff)
: couldn't map interrupt
isp10 at pci8 dev 6 function 0 "QLogic ISP2312" rev 0x02pci_intr_map: no
mapping for pin D (line=ff)
: couldn't map interrupt
isp11 at pci8 dev 6 function 1 "QLogic ISP2312" rev 0x02pci_intr_map: no
mapping for pin A (line=ff)
: couldn't map interrupt
vendor "Intel", unknown product 0x0326 (class system subclass interrupt, rev
0x09) at pci6 dev 0 function 1 not configured
ppb8 at pci6 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci9 at ppb8 bus 9
ppb9 at pci9 dev 1 function 0 "IBM PCIX-PCIX" rev 0x02
pci10 at ppb9 bus 10
isp12 at pci10 dev 4 function 0 "QLogic ISP2312" rev 0x02: irq 5
isp12: Polled Mailbox Command (0x2) Timeout
isp12: Polled Mailbox Command (0x8) Timeout
isp13 at pci10 dev 4 function 1 "QLogic ISP2312" rev 0x02: irq 10
isp13: Polled Mailbox Command (0x2) Timeout
isp13: Polled Mailbox Command (0x8) Timeout
isp14 at pci10 dev 6 function 0 "QLogic ISP2312" rev 0x02: irq 7
isp14: Polled Mailbox Command (0x2) Timeout
isp14: Polled Mailbox Command (0x8) Timeout
isp15 at pci10 dev 6 function 1 "QLogic ISP2312" rev 0x02: irq 11
isp15: Polled Mailbox Command (0x2) Timeout
isp15: Polled Mailbox Command (0x8) Timeout
vendor "Intel", unknown product 0x0327 (class system subclass interrupt, rev
0x09) at pci6 dev 0 function 3 not configured
ppb10 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci11 at ppb10 bus 11
vga1 at pci11 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82801EB/ER LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, CD-224E, 1.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
ahd0: target 6 synchronous with period = 0x9, offset = 0x3f(DT)
dkcsum: sd0 matches BIOS drive 0x80
ahd0: target 9 synchronous with period = 0x8, offset =
0x3f(RDSTRM|DT|IU|RTI|QAS)
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
==============================================================================
==============================================================================
Linux version 2.6.5-7.111.5-3d3000-4 ([EMAIL PROTECTED]) (gcc version 3.3.3
(SuSE Linux)) #4 SMP Mon Sep 12 15:44:17 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
BIOS-e820: 00000000cff70000 - 00000000cff7b000 (ACPI data)
BIOS-e820: 00000000cff7b000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
128MB vmalloc/ioremap area available.
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6860
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 819200 pages, LIFO batch:16
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD ) @ 0x000f68c0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xcff76a8f
ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0xcff7ae20
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xcff7ae94
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xcff7af48
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0xcff7af70
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0xcff7afc0
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0xcff76acb
ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ES7000: did not find Unisys ACPI OEM table!
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:3 APIC version 20
WARNING: NR_CPUS limit of 2 reached. Processor ignored.
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] global_irq_base[0x18])
IOAPIC[1]: Assigned apic_id 3
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec80400] global_irq_base[0x30])
IOAPIC[2]: Assigned apic_id 4
IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
ACPI: IOAPIC (id[0x05] address[0xfec84000] global_irq_base[0x48])
IOAPIC[3]: Assigned apic_id 5
IOAPIC[3]: apic_id 5, version 32, address 0xfec84000, GSI 72-95
ACPI: IOAPIC (id[0x08] address[0xfec84400] global_irq_base[0x60])
IOAPIC[4]: Assigned apic_id 8
IOAPIC[4]: apic_id 8, version 32, address 0xfec84400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/md1 console=ttyS1,115200n8 console=tty0
xio3dshm=128m,320m,320m
xio3d: mem[0]=134217728
xio3d: mem[1]=335544320
xio3d: mem[2]=335544320
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 3201.617 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 3369260k/4194304k available (2446k kernel code, 36868k reserved, 525k
data, 480k init, 2489792k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6324.22 BogoMIPS
Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
per-CPU timeslice cutoff: 2925.73 usecs.
task migration cache decay timeout: 3 msecs.
masked ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 6389.76 BogoMIPS
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU#1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 04
Total of 2 processors activated (12713.98 BogoMIPS).
WARNING: 1 siblings found for CPU0, should be 2
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0,
3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14,
3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4,
4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18,
4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9,
5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22,
5-23, 8-0, 8-1, 8-2, 8-3, 8-4, 8-5, 8-6, 8-7, 8-8, 8-9, 8-10, 8-11, 8-12, 8-13,
8-14, 8-15, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3199.0523 MHz.
..... host bus clock speed is 199.0970 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd840, last bus=11
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0.PXH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Device [PRT] status [0000000c]: functional but not present; setting
present
SCSI subsystem initialized
00:00:02[A] -> 2-16 -> IRQ 16 level low
00:00:02[B] -> 2-17 -> IRQ 17 level low
00:00:02[C] -> 2-18 -> IRQ 18 level low
00:00:02[D] -> 2-19 -> IRQ 19 level low
00:00:1d[D] -> 2-23 -> IRQ 23 level low
00:02:01[A] -> 3-0 -> IRQ 24 level low
00:02:01[B] -> 3-1 -> IRQ 25 level low
00:02:01[C] -> 3-8 -> IRQ 32 level low
00:02:01[D] -> 3-9 -> IRQ 33 level low
00:02:03[A] -> 3-4 -> IRQ 28 level low
00:02:03[B] -> 3-5 -> IRQ 29 level low
00:02:03[C] -> 3-6 -> IRQ 30 level low
00:02:03[D] -> 3-7 -> IRQ 31 level low
00:03:01[A] -> 4-0 -> IRQ 48 level low
00:03:01[B] -> 4-1 -> IRQ 49 level low
00:03:01[C] -> 4-2 -> IRQ 50 level low
00:03:01[D] -> 4-3 -> IRQ 51 level low
00:03:02[A] -> 4-6 -> IRQ 54 level low
00:03:02[B] -> 4-7 -> IRQ 55 level low
00:07:01[A] -> 5-0 -> IRQ 72 level low
00:07:01[B] -> 5-1 -> IRQ 73 level low
00:07:01[C] -> 5-2 -> IRQ 74 level low
00:07:01[D] -> 5-3 -> IRQ 75 level low
00:09:01[A] -> 8-0 -> IRQ 96 level low
00:09:01[B] -> 8-1 -> IRQ 97 level low
00:09:01[C] -> 8-2 -> IRQ 98 level low
00:09:01[D] -> 8-3 -> IRQ 99 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 24.
number of IO-APIC #4 registers: 24.
number of IO-APIC #5 registers: 24.
number of IO-APIC #8 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 003 03 0 0 0 0 0 1 1 31
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 1 0 0 0 1 1 71
0a 003 03 0 0 0 0 0 1 1 79
0b 003 03 0 0 0 0 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 0 0 0 0 0 1 1 A1
10 003 03 1 1 0 1 0 1 1 A9
11 003 03 1 1 0 1 0 1 1 B1
12 003 03 1 1 0 1 0 1 1 B9
13 003 03 1 1 0 1 0 1 1 C1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 003 03 1 1 0 1 0 1 1 C9
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 03000000
....... : arbitration: 03
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 D1
01 003 03 1 1 0 1 0 1 1 D9
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 003 03 1 1 0 1 0 1 1 32
05 003 03 1 1 0 1 0 1 1 3A
06 003 03 1 1 0 1 0 1 1 42
07 003 03 1 1 0 1 0 1 1 4A
08 003 03 1 1 0 1 0 1 1 E1
09 003 03 1 1 0 1 0 1 1 E9
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 04000000
....... : arbitration: 04
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 52
01 003 03 1 1 0 1 0 1 1 5A
02 003 03 1 1 0 1 0 1 1 62
03 003 03 1 1 0 1 0 1 1 6A
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 003 03 1 1 0 1 0 1 1 72
07 003 03 1 1 0 1 0 1 1 7A
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 05000000
....... : arbitration: 05
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 82
01 003 03 1 1 0 1 0 1 1 8A
02 003 03 1 1 0 1 0 1 1 92
03 003 03 1 1 0 1 0 1 1 9A
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 08000000
....... : arbitration: 08
.... register #03: 00000001
....... : Boot DT : 1
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 1 1 0 1 0 1 1 A2
01 003 03 1 1 0 1 0 1 1 AA
02 003 03 1 1 0 1 0 1 1 B2
03 003 03 1 1 0 1 0 1 1 BA
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
IRQ24 -> 1:0
IRQ25 -> 1:1
IRQ28 -> 1:4
IRQ29 -> 1:5
IRQ30 -> 1:6
IRQ31 -> 1:7
IRQ32 -> 1:8
IRQ33 -> 1:9
IRQ48 -> 2:0
IRQ49 -> 2:1
IRQ50 -> 2:2
IRQ51 -> 2:3
IRQ54 -> 2:6
IRQ55 -> 2:7
IRQ72 -> 3:0
IRQ73 -> 3:1
IRQ74 -> 3:2
IRQ75 -> 3:3
IRQ96 -> 4:0
IRQ97 -> 4:1
IRQ98 -> 4:2
IRQ99 -> 4:3
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Simple Boot Flag at 0x39 set to 0x80
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <[EMAIL PROTECTED]>
Starting balanced_irq
highmem bounce pool size: 64 pages
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ECC: monitor version 0.17 (Dec 17 2004)
ECC: regs: pcicmd=0106, ddrcsr=301c, drc=2c20021e
ECC: Before ---- pcicmd=0100
ECC: HI: ERRMASK=00, SCICMD=00, SMICMD=00, SERRCMD=00, MCERRCMD=00
ECC: SYSBUS: ERRMASK=0009, SCICMD=0000, SMICMD=0000, SERRCMD=0000, MCERRCMD=0000
ECC: BUF: ERRMASK=00, SCICMD=00, SMICMD=00, SERRCMD=00, MCERRCMD=00
ECC: DRAM: ERRMASK=00, SCICMD=00, SMICMD=03, SERRCMD=00, MCERRCMD=00
ECC: ERR_CTL: SYSBUS=00200000, HI=00040000, BUF=00000000, DRAM=00000000
ECC: After ---- pcicmd=0100
ECC: HI: ERRMASK=00, SCICMD=00, SMICMD=00, SERRCMD=00, MCERRCMD=7f
ECC: SYSBUS: ERRMASK=0000, SCICMD=0000, SMICMD=0000, SERRCMD=0000, MCERRCMD=007f
ECC: BUF: ERRMASK=00, SCICMD=00, SMICMD=00, SERRCMD=00, MCERRCMD=0f
ECC: DRAM: ERRMASK=00, SCICMD=00, SMICMD=03, SERRCMD=00, MCERRCMD=66
ECC: ERR_CTL: SYSBUS=00240000, HI=00040000, BUF=00040000, DRAM=00040000
ECC: Found memory controller 8086:3590
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
hw_random hardware driver 1.0.0 loaded
ipmi message handler version v33
ipmi device interface version v33
IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT
version v33
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca8
IPMI kcs interface initialized
IPMI Watchdog: driver version v33
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot version
v33.
IPMI poweroff: Unable to find a poweroff function that will work, giving up
xio3d: Xiotech Mag 3D kernel support module, v1.2
xio3d: blknum=128, nfree=0, blks->mem=efc00000, blks->dma=2fc00000
xio3d: blknum=320, nfree=0, blks->mem=dbc00000, blks->dma=1bc00000
xio3d: blknum=320, nfree=0, blks->mem=c7c00000, blks->dma=07c00000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using noop io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 5.2.39
Copyright (c) 1999-2004 Intel Corporation.
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1420-0x1427, BIOS settings: hda:pio, hdb:pio
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, 16bit)
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, 16bit)
Vendor: SEAGATE Model: ST336752LC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
Vendor: SEAGATE Model: ST336752LC Rev: 0003
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
Vendor: SUPER Model: GEM359 REV001 Rev: 1.09
Type: Processor ANSI SCSI revision: 02
SCSI device sda: 71687369 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 71687369 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi0, channel 0, id 8, lun 0, type 3
Fusion MPT base driver 3.01.03
Copyright (c) 1999-2004 LSI Logic Corporation
Fusion MPT SCSI Host driver 3.01.03
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Crash dump driver initialized.
block device driver for LKCD registered
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb6 ...
md: adding sdb6 ...
md: sdb5 has different UUID to sdb6
md: sdb3 has different UUID to sdb6
md: sdb2 has different UUID to sdb6
md: adding sda6 ...
md: sda5 has different UUID to sdb6
md: sda3 has different UUID to sdb6
md: sda2 has different UUID to sdb6
md: created md3
md: bind<sda6>
md: bind<sdb6>
md: running: <sdb6><sda6>
raid1: raid set md3 active with 2 out of 6 mirrors
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: sdb2 has different UUID to sdb5
md: adding sda5 ...
md: sda3 has different UUID to sdb5
md: sda2 has different UUID to sdb5
md: created md2
md: bind<sda5>
md: bind<sdb5>
md: running: <sdb5><sda5>
raid1: raid set md2 active with 2 out of 6 mirrors
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb2 has different UUID to sdb3
md: adding sda3 ...
md: sda2 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 6 mirrors
md: considering sdb2 ...
md: adding sdb2 ...
md: adding sda2 ...
md: created md0
md: bind<sda2>
md: bind<sdb2>
md: running: <sdb2><sda2>
raid1: raid set md0 active with 2 out of 6 mirrors
md: ... autorun DONE.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 480k freed
EXT3 FS on md1, internal journal
md: raidstart(pid 86) used deprecated START_ARRAY ioctl. This will not be
supported beyond 2.6
md: could not lock sda2.
md: could not import sda2!
md: autostart unknown-block(0,2050) failed!
md: raidstart(pid 86) used deprecated START_ARRAY ioctl. This will not be
supported beyond 2.6
md: could not lock sda3.
md: could not import sda3!
md: autostart unknown-block(0,2051) failed!
md: raidstart(pid 86) used deprecated START_ARRAY ioctl. This will not be
supported beyond 2.6
md: could not lock sda5.
md: could not import sda5!
md: autostart unknown-block(0,2053) failed!
md: could not lock sda6.
md: could not import sda6!
md: autostart unknown-block(0,2054) failed!
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Block device (9,2) successfully configured for dumping
Adding 2097136k swap on /dev/md2. Priority:42 extents:1
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
eth0: no IPv6 routers present
Click here to donate to the Hurricane Katrina relief effort.
