Hi List,
I'm running 3.8 from the snapshot 2nd Oct, which I upgraded from 3.7, on
a soekris net4501.
My problem, is probably offtopic, but I'm hoping the wisdom of this list
will point me in the right direction.
I have an apple iBook G4 which will not connect to my OpenBSD ath0
minipci card in the soekris, I just get the following errors:
ath0: bogus xmit rate 0x0
The iBook associates with the wireless network and I can connect to two
other OpenBSD machines with wi0 and ipw0 cards in, which are running on
the same wireless LAN.
When the net4501 was running 3.7 I would get the same error message, but
if I toggled the airport on and off on the ibook I would usually get a
connection, or the soekris would crash, I caught a ps and partial trace
from one of the 3.7 crashes which is shown below.
Can anyone suggest away of resolving the iBooks inability to talk to the
ath0 card?
My dmesg, hostname.ath0 and the ps and trace follow.
Thanks, in advance,
Fred
kernel:kernel: page fault trap, code=0
Stopped at Xrecurse_legacy8+0x7d: movl 0x4(%ebx),%eax
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
kernel: page fault trap, code=0
Faulted in DDB; continuing...
ddb> trace
Xrecurse_legacy8() at Xrecurse_legacy8+0x7d
--- interrupt ---
Xspllower(800,3a,0,0) at Xspllower+0xe
cnputc(3a,6,d06d1bac,d01e24d1,6) at cnputc+0x26
db_putchar(3a,14,0,6) at db_putchar+0xc6
kprintf(d04fbc88,14,0,0,d06d1c98) at kprintf+0xe20
db_printf(d04fbc88,0,0,0) at db_printf+0x2d
kdbprinttrap(6,0,0,0,0) at kdbprinttrap+0x18
kdb_trap(6,0,d06d1d34,600) at kdb_trap+0x46
trap() at trap+0xa9
--- trap (number 6) ---
pmap_extract(d05cf940,d66d6800,d06d1dcc,0,d05cf940) at pmap_extract+0x36
_bus_dmamap_load_buffer(d0570440,d0836880,d66d6800,600,0) at
_bus_dmamap_load_b
uffer+0x58
_bus_dmamap_load_mbuf(d0570440,d0836880,d29c3100,1) at
_bus_dmamap_load_mbuf+0x
90
ath_tx_start(d0839000,d092cc00,d083c5cc,d29c3100) at ath_tx_start+0x1b9
ath_start(d0839030,d65591b8,4c1b8,d65591e4) at ath_start+0xfc
ath_rx_proc(d0839000,1,d0101f20,d06d21b4) at ath_rx_proc+0x1d6
ath_intr1(d0839000) at ath_intr1+0x130
Xrecurse_legacy10() at Xrecurse_legacy10+0x8a
--- interrupt ---
--db_more-- Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x7
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x7
--- interrupt ---
Xdoreti() at Xdoreti+0x11
--- interrupt ---
Xdoreti() at Xdoreti+0x23
--- interrupt ---
Xdoreti() at Xdoreti+0x7
--db_more--
At this point I pressed the wrong key on the console and the soekris
rebooted.
Here is my hostname.ath0:
inet 10.0.5.1 255.255.255.0 NONE media DS11 mediaopt hostap nwid wifinet
nwkey xxxxxxxxxxxxx
Here is the complete dmesg:
OpenBSD 3.8-current (GENERIC) #169: Sun Oct 2 15:06:50 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem = 66691072 (65128K)
avail mem = 53411840 (52160K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/41/22, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0
stepping 1.1, CPU clock 133MHz, reset 1<PWRGOOD>
gpio0 at elansc0: 32 pins
ath0 at pci0 dev 16 function 0 "Atheros AR5212" rev 0x01: irq 10
ath0: AR5213 5.9 phy 4.3 rf5112 3.6, FCC2A*, address 00:02:6f:21:ef:1c
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 11, address 00:00:24:c3:ff:20
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 5, address 00:00:24:c3:ff:21
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 20 function 0 "NS DP83815 10/100" rev 0x00: DP83816A,
irq 9, address 00:00:24:c3:ff:22
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA THNCF512MPG>
wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f1c5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
