On Thu, Sep 8, 2011 at 5:53 AM, David Walker <davidianwal...@gmail.com> wrote: > Hi Thomas. > Sorry for the delay. > > On 21/08/2011, Tomas Bodzar <tomas.bod...@gmail.com> wrote: >> Hi, >> >> post output of 'usbdevs -v' command. > > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > B port 1 addr 2: full speed, power 500 mA, config 1, NETGEAR > WG111(0x4240), GlobespanVirata(0x0846), rev 10.20, iSerialNumber > 3887-0000 > B port 2 addr 3: full speed, self powered, config 1, Generic USB > Hub(0x9254), ALCOR(0x058f), rev 3.12 > B port 1 powered > B port 2 addr 4: low speed, power 100 mA, config 1, Microsoft Basic > Optical Mouse v2.0(0x00cb), Microsoft(0x045e), rev 1.99 > B port 3 powered > B port 4 addr 5: low speed, power 100 mA, config 1, USB > Keyboard(0x00f2), NOVATEK(0x0603), rev 1.12 > >> Install usbutil package as well >> and post output of 'usbctl -a 2 -f /dev/usb0' > > DEVICE addr 2 > DEVICE descriptor: > bLength=18 bDescriptorType=device(1) bcdUSB=2.00 bDeviceClass=0 > bDeviceSubClass=0 > bDeviceProtocol=0 bMaxPacketSize=64 idVendor=0x0846 idProduct=0x4240 > bcdDevice=1020 > iManufacturer=1(GlobespanVirata) iProduct=2(NETGEAR WG111) > iSerialNumber=3(3887-0000) bNumConfigurations=1 > > CONFIGURATION descriptor 0: > bLength=9 bDescriptorType=config(2) wTotalLength=53 bNumInterface=1 > bConfigurationValue=1 iConfiguration=0() bmAttributes=80 bMaxPower=500 mA > > INTERFACE descriptor 0: > bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=0 > bNumEndpoints=5 bInterfaceClass=255 bInterfaceSubClass=255 > bInterfaceProtocol=255 iInterface=0() > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in > bmAttributes=bulk wMaxPacketSize=64 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-out > bmAttributes=bulk wMaxPacketSize=64 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=2-in > bmAttributes=bulk wMaxPacketSize=64 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=2-out > bmAttributes=bulk wMaxPacketSize=64 bInterval=0 > > ENDPOINT descriptor: > bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=3-in > bmAttributes=interrupt wMaxPacketSize=64 bInterval=1 > > current configuration 1
Do you have latest snapshot to see if something changed in dmesg output? > > ---------- > > I noticed this: > > MASTER_SITES= B ftp://ftp.augustsson.net/pub/netbsd/ > > http://www.openbsd.org/cgi-bin/cvsweb/ports/sysutils/usbutil/Makefile?rev=1.1 9;content-type=text%2Fplain > > AFAICT, there's nothing useful there. > I see this: > http://www.freshports.org/sysutils/usbutil/ Not sure how are fbsd ports related to obsd. This site is correct http://openports.se/sysutils/usbutil > > Best wishes.