Hello, I am trying to get OpenBSD 3.8 running on a stock HP Proliant DL-320 server (bge network, SATA drives, no floppy, no cd, P4, 1G RAM, HP iLo) with the HP 8 Internal Port SAS Host Bus Adapter with RAID (link: http://h18004.www1.hp.com/products/...-hba/index.html
HP part number: 347786-B21 The chipset is LSI SAS 1068, and according to LSI, supported with the mpt driver. Here is the link to LSI's information: http://www.lsilogic.com/products/sas_ics/lsisas1068.html When I try to install OBSD 3.8 (via USB CDROM Drive with cd38.iso downloaded from current), I get to the "Proceed with Install", then "no disks found." I realize that the hardware isnt currently supported, but was wondering if anyone would want to take a crack at adding support for this to the mpt driver (assuming it isnt already being worked on). I am willing to test, or do whatever I can to help, I just can't write code (especially drivers), because I dont know how to. I was able to get network connectivity, so I wrote my dmesg output to a file, and sent it to myself. Here it is: OpenBSD 3.8-current (RAMDISK_CD) #853: Tue Oct 25 23:25:14 MDT 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 1073270784 (1048116K) avail mem = 973828096 (951004K) using 4278 buffers containing 53768192 bytes (52508K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 6 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00) pcibios0: PCI bus #5 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x1600 0xee000/0x2000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" rev 0x05 ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev 0x05 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci2 at ppb1 bus 2 bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): irq 5, address 00:14:c2:3b:f1:77 brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): irq 7, address 00:14:c2:3b:f1:76 brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 vendor "Symbios Logic", unknown product 0x0054 (class mass storage subclass SCSI, rev 0x00) at pci2 dev 3 function 0 not configured ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 7 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 10 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5 usb4 at ehci0: USB revision 2.0 uhub4 at usb4 uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3 pci5 at ppb4 bus 5 vendor "Compaq", unknown product 0xb203 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 0 not configured vendor "Compaq", unknown product 0xb204 (class system subclass miscellaneous, rev 0x01) at pci5 dev 2 function 2 not configured vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask ffe5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks umass0 at uhub4 port 4 configuration 1 interface 0 umass0: LaCie LaCie DVD Drive USB2, rev 2.00/0.00, addr 2 umass0: using ATAPI over Bulk-Only scsibus0 at umass0: 2 targets cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD_RW ND-3520A, 1.04> SCSI0 5/cdrom removable uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1 uhidev1: 3 report ids uhid at uhidev1 reportid 1 not configured uhid at uhidev1 reportid 2 not configured uhid at uhidev1 reportid 3 not configured root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 Thanks in advance.
