now I got the installation log of current trying the amd64 distro: ----------------- CD-ROM: 9F Loading /5.2/AMD64/CDBOOT probing: pc0 mem[620K 2046M a20=on] disk: hd0+* cd0 >> OpenBSD/amd64 CDBOOT 3.19 boot> booting cd0a:/5.2/amd64/bsd.rd: 3046708 8]=0xb8eb78 entry point at 0x1001e0 [7205c766, 34000004, 24448b12, c638a304] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 19995-2012 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.2-current (RAMDISK_CD) #96: Sun Dec 2 13:12:01 MST 2012 der...@amd64.openbsd.org:/usr/src/sys/sys/arch/amd64/compile/RAMDISK_CD real mem = 2145845248 (2046MB) avail mem = 2068709376 (1972MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.33 @ 0xdc010 (58 entries) bios0: vendor FSC version "6.0 Rev. R04A5F1.1790" date 09/16/2005 bios0: FUJITSU SIEMENES PRIMERGY RX200S2 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S4 S5 acpi0: tables DSDT FACP MCFC SPCR APIC BOOY SSDT acpimadt0 at acpi0 addt 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(TM) CPU 3.00 GHz, 3000.53 NHz cpu0: FPU, VME, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, PGE,MCA, CMOV, PAT, PSE36, CF LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID, CX16,xTPR,NXE,LONG,PERF cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 200MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioacpi0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioacpi1 at mainbus0: apid 3 pa 0xfec80000, version 20, 24 pins ioacpi2 at mainbus0: apid 4 pa 0xfec80400, version 20, 24 pins acpiprt0 at acpi0: bus 2 (P2P3) acpiprt1 at acpi0: bus 3 (P2P4) acpiprt2 at acpi0: bus 0 (PCI0) acpiprt3 at acpi0: bus 4 (PCIB) pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x09 "Intel E7520 Error Reporting" rev 0x09 at pci0 dev 0 function 1 not configured ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x09 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09 pci2 at ppb1 bus 2 "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured ppb2 at pci1 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09 pci3 at ppb2 bus 3 em0 at pci3 dev 3 function 0 "Intel PRO/1000MT (82545CM)" rev 0x04: apic 2 int1 6, address 00:04:23:c4:01:16 mpi0 at pci3 dev 5 function 0 "Symbios Logic 53c1030" rev 0x07: msi scsibus0 at mpi0: 16 targets, initiator 7 sd0 at scsibus0 targ 1 lun 0: <LSILOGIC, 1030 IM, 1000> SCSI2 0/direct fixed sd0: 34700MB, 512 bytes/sector, 71065600 sectors mpi0: timeout mpi0: timeout mpi0: timeout mpi0: timeout mpi0: timeout mpi0: timeout mpi0: phys disk Async at 0 MHz width 8bit offset 0 QAS 0 DT 0 IU 0 em1 at pci3 dev 6 function 0 "Intel PRO/100MT (82546GB)" rev 0x03: apic 2 int 1 6, address 00:0a:e4:80:5c:4c em2 at pci3 dev 6 function 1 "Intel PRO/1000MT (82545GB)" rev 0x03: apic 2 int1 7, address 00:0a:e4:80:5c:4d "Intel IOxAPIC" rev 0x09 at pci1 dev 0 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev. 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 pci4 at ppb3 bus 4 vga1 at pci4 dev 1 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel 82801EB/ER LPC" rev 0x02 at pci0 dev 31 function 0 not configured pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.01> ATAPI 5/cdrom r emovable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) "Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at mainbus0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 panic: attempt to execute user address 0x0 in supervisor mode The operating system has halted Please press any key to reboot --------------
Thanks
