Hello misc,
I try to install OpenBSD on my Apple MacBook Pro mid 2007 (or
MacBookPro3,1) for some time now with different -release and the
latest -snapshot versions with no success. The bootloader shows up and
tries to launch bsd.rd:
probing: pc0 mem [572K 64K 3053M 13M 60K 24K 76K 1024M]
disk: hd0 hd1* hd2*
>>OpenBSD/amd64 BOOTX64 3.30
boot>
cannot boot hd0a:/etc/random.seed: No such file or directory
booting hd0a:/bsd: 3356852+1412368+2413568+0+598016=0x76d238
entry point at 0xf001000 [7205c766, 34000004, 24448b12, f4c0a304]
After printing this lines it takes several seconds and then it reboots.
FreeBSD-11 is booting well on this device so I attached the dmesg
output from there, maybe it is helpful.
Thanks in advance
Thomas
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 01:43:23 UTC 2016
r...@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM
3.8.0)
VT(efifb): resolution 1440x900
CPU: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz (2194.55-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6fa Family=0x6 Model=0xf Stepping=10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4087091200 (3897 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <APPLE Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
cryptosoft0: <software crypto> on motherboard
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
CPU0: local APIC error 0x80
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem
0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0
on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x60c0-0x60df at device
26.0 on pci0
uhci0: LegSup = 0x3000
usbus0 on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x60a0-0x60bf at device
26.1 on pci0
usbus1 on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem
0xdb504c00-0xdb504fff at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801H HDA Controller> mem 0xdb500000-0xdb503fff at device 27.0
on pci0
pcib2: <PCI-PCI bridge> at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib4: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib4
ath0: <Atheros 5418> mem 0xd7300000-0xd730ffff at device 0.0 on pci2
ath0: [HT] enabling HT modes
ath0: [HT] RTS aggregates limited to 8 KiB
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5418 mac 12.10 RF5133 phy 8.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib5: [GIANT-LOCKED]
pci3: <ACPI PCI bus> on pcib5
mskc0: <Marvell Yukon 88E8058 Gigabit Ethernet> port 0x3000-0x30ff mem
0xd7200000-0xd7203fff at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Using defaults for TSO: 65518/35/2048
msk0: Ethernet address: 00:1b:63:9f:dc:af
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6080-0x609f at device
29.0 on pci0
usbus3 on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6060-0x607f at device
29.1 on pci0
usbus4 on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6040-0x605f at device
29.2 on pci0
usbus5 on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem
0xdb504800-0xdb504bff at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib6
pci4: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port
0x6108-0x610f,0x611c-0x611f,0x6100-0x6107,0x6118-0x611b,0x60e0-0x60ef at device
31.1 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port
0x60f8-0x60ff,0x6114-0x6117,0x60f0-0x60f7,0x6110-0x6113,0x6020-0x603f mem
0xdb504000-0xdb5047ff at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
battery0: <ACPI Control Method Battery> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <Realtek ALC889A HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC889A Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC889A (Internal Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC889A (Rear Analog)> at nid 21 and 26 on hdaa0
pcm2: <Realtek ALC889A (Rear Digital)> at nid 30 and 31 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6: 480Mbps High Speed USB v2.0
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SDSSDP128G 3.2.0> ACS-2 ATA SATA 3.x device
ada0: Serial Number 145271400667
ada0: 100.000MB/s transfers (UDMA5, PIO 512bytes)
ada0: 120196MB (246162672 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
ada1 at ahcich0 bus 0 scbus1 target 0 lun 0
uhub1: 2 ports with 2 removable, self powered
ada1: <SanDisk SDSSDP128G 3.2.0> ACS-2 ATA SATA 3.x device
ada1: Serial Number 145271401638
ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
uhub3: 2 ports with 2 removable, self powered
ada1: 120196MB (246162672 512 byte sectors)
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1097276653 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
wlan0: Ethernet address: 00:1e:52:71:c8:3c
msk0: link state changed to DOWN
uhub6: 6 ports with 6 removable, self powered
ugen6.2: <Apple Inc.> at usbus6
ugen0.2: <vendor 0x05ac> at usbus0
ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on
usbus0
kbd1 at ukbd0
ugen5.2: <Apple Computer, Inc.> at usbus5
ugen5.3: <Apple Computer> at usbus5
ukbd1: <Apple Internal Keyboard> on usbus5
kbd2 at ukbd1
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on
usbus0
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on
usbus5
ums0: 5 buttons and [XY] coordinates ID=0
atp0: <Touchpad> on usbus5
uhid1: <Apple Internal Keyboard> on usbus5
wlan0: link state changed to UP
wlan0: link state changed to DOWN
wlan0: link state changed to UP
pid 1075 (dbus-send), uid 1001: exited on signal 6
pid 1086 (dbus-send), uid 1001: exited on signal 6
pid 1099 (dbus-send), uid 1001: exited on signal 6
