On Tue, Aug 11, 2020 at 08:17:01PM -0400, Jon Fineman wrote:
> I just upgraded from 6.6 to snapshot via sysupgrade -s
>
> After reboot I get the various emails the upgrade goes fine, no errors,
> the firmware is upgraded.
>
> About 30 seconds after I get the login prompt the laptop powers off.
>
> I turned in on and at the boot prompt typed boot -c and disable amdgpu
> Subjectively I got more than 30 seconds after the boot prompt. I was
> able to log in and look around a bit and it powered off.
>
> Same thing with booting into single user mode.
>
> Thoughts? Suggestions on how to get any data?
>
> Jon
>
sysctl.conf needs
machdep.allowaperture=2
if you can't mount from another computer, burn 6.6 onto a USB stick and
mount from that. Don't even try from running -current.
You can probably get /var/run/dmesg.boot. Plus /var/log/Xorg.0.log if
you manage to get to X. (Good luck with that :-{ )
I was given advice in the past to build with a certain change, but I was
unable to build that on my laptop due to very little memory.
There is newer firmware, X, etc.. Hopefully someone will chime in with
something to try for a build
Chris Bennett
>
>
> On Mon, 10 Aug 2020 20:28:34 -0500
> Chris Bennett <cpb_m...@bennettconstruction.us> wrote:
>
> > On Sun, Aug 09, 2020 at 10:02:24PM -0400, Jon Fineman wrote:
> > > I have an Acer Aspire A315 laptop that freezes every once in a
> > > while. I think it is GPU related, but have not been able to get any
> > > logs. In addition a while ago (roughly when 6.7 came out) I tried
> > > to upgrade from 6.6 to 6.7 and the laptop would turn off just after
> > > getting the log in prompt. Again no logs.
> > >
> > > One thought was in my xorg.conf file to change the driver from
> > > AMDGPU to vesa. However that is producing an error. Log and dmesg
> > > below.
> > >
> > > Any thoughts on how to proceed?
> > >
> >
> > There is an excellent chance that we have the same problem.
> > I was running -current for a long while, when I had the same problem
> > with sudden unexpected shutdown. This was a good while back.
> > I have 50GB of install66.iso from current back then. They are on one
> > of my servers. Unfortunately, I just don't have access to enough
> > bandwidth or data to download them to hopefully find the date that
> > there was a change that messed things up.
> >
> > Try boot -c then disable amdgpu
> > Might help. Also try boot -s and wait. If it shuts down there too,
> > probably have the same problem. Or not. :-)
> >
> > I'm stuck at 6.6 -stable for now.
> >
> > Chris Bennett
> >
> >
> > > Thnaks.
> > >
> > > Jon
> > >
> > >
> > > xorg.conf:
> > > Section "Device"
> > > Identifier "graphicsdriver"
> > > #Driver "AMDGPU"
> > > #Option "TearFree" "true"
> > > Driver "vesa"
> > > EndSection
> > >
> > >
> > >
> > > Xorg.0.log:
> > > [124569.415] (--) checkDevMem: using aperture driver /dev/xf86
> > > [124569.425] (--) Using wscons driver on /dev/ttyC4
> > > [124569.446]
> > > X.Org X Server 1.20.5
> > > X Protocol Version 11, Revision 0
> > > [124569.446] Build Operating System: OpenBSD 6.6 amd64
> > > [124569.446] Current Operating System: OpenBSD laptop.jonjfineman.me
> > > 6.6 GENERIC.MP#3 amd64 [124569.447] Build Date: 30 July 2020
> > > 11:25:30AM [124569.447]
> > > [124569.447] Current version of pixman: 0.38.4
> > > [124569.447] Before reporting problems, check
> > > http://wiki.x.org to make sure that you have the latest version.
> > > [124569.447] Markers: (--) probed, (**) from config file, (==)
> > > default setting, (++) from command line, (!!) notice, (II)
> > > informational, (WW) warning, (EE) error, (NI) not implemented, (??)
> > > unknown. [124569.447] (==) Log file: "/var/log/Xorg.0.log", Time:
> > > Sun Aug 9 05:48:55 2020 [124569.447] (==) Using config file:
> > > "/etc/X11/xorg.conf" [124569.447] (==) Using system config directory
> > > "/usr/X11R6/share/X11/xorg.conf.d" [124569.447] (==) No Layout
> > > section. Using the first Screen section. [124569.447] (==) No
> > > screen section available. Using defaults. [124569.447] (**)
> > > |-->Screen "Default Screen Section" (0) [124569.447] (**) |
> > > |-->Monitor "<default monitor>" [124569.448] (==) No device
> > > specified for screen "Default Screen Section". Using the first
> > > device section listed. [124569.448] (**) | |-->Device
> > > "graphicsdriver" [124569.448] (==) No monitor specified for screen
> > > "Default Screen Section". Using a default monitor configuration.
> > > [124569.448] (==) Automatically adding devices
> > > [124569.448] (==) Automatically enabling devices
> > > [124569.448] (==) Not automatically adding GPU devices
> > > [124569.448] (==) Max clients allowed: 256, resource mask: 0x1fffff
> > > [124569.448] (==) FontPath set to:
> > > /usr/X11R6/lib/X11/fonts/misc/,
> > > /usr/X11R6/lib/X11/fonts/TTF/,
> > > /usr/X11R6/lib/X11/fonts/OTF/,
> > > /usr/X11R6/lib/X11/fonts/Type1/,
> > > /usr/X11R6/lib/X11/fonts/100dpi/,
> > > /usr/X11R6/lib/X11/fonts/75dpi/
> > > [124569.448] (==) ModulePath set to "/usr/X11R6/lib/modules"
> > > [124569.448] (II) The server relies on wscons to provide the list of
> > > input devices. If no devices become available, reconfigure wscons or
> > > disable AutoAddDevices. [124569.448] (II) Loader magic:
> > > 0xc3982ca3000 [124569.448] (II) Module ABI versions:
> > > [124569.448] X.Org ANSI C Emulation: 0.4
> > > [124569.448] X.Org Video Driver: 24.0
> > > [124569.448] X.Org XInput driver : 24.1
> > > [124569.448] X.Org Server Extension : 10.0
> > > [124569.448] (--) PCI:*(0@0:1:0) 1002:98e4:1025:1192 rev 218, Mem @
> > > 0xe0000000/268435456, 0xf0000000/8388608, 0xf0d00000/262144, I/O @
> > > 0x00003000/256, BIOS @ 0x????????/131072 [124569.448] (II)
> > > LoadModule: "glx" [124569.449] (II) Loading
> > > /usr/X11R6/lib/modules/extensions/libglx.so [124569.451] (II) Module
> > > glx: vendor="X.Org Foundation" [124569.451] compiled for
> > > 1.20.5, module version = 1.0.0 [124569.451] ABI class: X.Org
> > > Server Extension, version 10.0 [124569.451] (II) LoadModule: "vesa"
> > > [124569.452] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
> > > [124569.452] (II) Module vesa: vendor="X.Org Foundation"
> > > [124569.452] compiled for 1.20.5, module version = 2.3.4
> > > [124569.452] Module class: X.Org Video Driver [124569.452]
> > > ABI class: X.Org Video Driver, version 24.0 [124569.452] (II) VESA:
> > > driver for VESA chipsets: vesa [124569.452] (II) Loading sub module
> > > "vbe" [124569.452] (II) LoadModule: "vbe"
> > > [124569.453] (II) Loading /usr/X11R6/lib/modules/libvbe.so
> > > [124569.453] (II) Module vbe: vendor="X.Org Foundation"
> > > [124569.453] compiled for 1.20.5, module version = 1.1.0
> > > [124569.453] ABI class: X.Org Video Driver, version 24.0
> > > [124569.453] (II) Loading sub module "int10"
> > > [124569.453] (II) LoadModule: "int10"
> > > [124569.455] (II) Loading /usr/X11R6/lib/modules/libint10.so
> > > [124569.455] (II) Module int10: vendor="X.Org Foundation"
> > > [124569.455] compiled for 1.20.5, module version = 1.0.0
> > > [124569.455] ABI class: X.Org Video Driver, version 24.0
> > > [124569.455] (II) VESA(0): initializing int10
> > > [124569.455] (EE) VESA(0): Cannot read int vect
> > > [124569.455] (II) UnloadModule: "vesa"
> > > [124569.455] (II) UnloadSubModule: "int10"
> > > [124569.455] (II) Unloading int10
> > > [124569.455] (II) UnloadSubModule: "vbe"
> > > [124569.455] (II) Unloading vbe
> > > [124569.455] (EE) Screen(s) found, but none have a usable
> > > configuration. [124569.455] (EE)
> > > Fatal server error:
> > > [124569.455] (EE) no screens found(EE)
> > > [124569.455] (EE)
> > > Please consult the The X.Org Foundation support
> > > at http://wiki.x.org
> > > for help.
> > > [124569.455] (EE) Please also check the log file at
> > > "/var/log/Xorg.0.log" for additional information. [124569.455] (EE)
> > > [124569.455] (EE) Server terminated with error (1). Closing log
> > > file.
> > >
> > >
> > >
> > >
> > > DMESG:
> > > OpenBSD 6.6 (GENERIC.MP) #3: Mon Jul 20 23:21:24 MDT 2020
> > >
> > > t...@syspatch-66-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 5978714112 (5701MB)
> > > avail mem = 5784797184 (5516MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xdf266000 (27 entries)
> > > bios0: vendor Insyde Corp. version "V1.00" date 03/20/2017
> > > bios0: Acer Aspire A315-21
> > > acpi0 at bios0: ACPI 5.0
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP MSDM BOOT HPET MCFG WDAT UEFI SSDT IVRS SSDT
> > > SSDT SSDT UEFI SPCR SSDT CRAT TPM2 FPDT ASF! WDRT VFCT SSDT APIC
> > > SSDT BGRT acpi0: wakeup devices GPP1(S4) GPP4(S4) GFX0(S4) GFX1(S4)
> > > GFX2(S4) GFX3(S4) GFX4(S4) EHC1(S3) XHC0(S3) acpitimer0 at acpi0:
> > > 3579545 Hz, 32 bits acpihpet0 at acpi0: 14318180 Hz acpimcfg0 at
> > > acpi0 acpimcfg0: addr 0xf8000000, bus 0-63
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 16 (boot processor)
> > > cpu0: AMD A9-9420 RADEON R5, 5 COMPUTE CORES 2C+3G, 2994.79 MHz,
> > > 15-70-00 cpu0:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,XSAVEOPT
> > > cpu0: 96KB 64b/line 3-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
> > > 64b/line 16-way L2 cache cpu0: ITLB 48 4KB entries fully
> > > associative, 24 4MB entries fully associative cpu0: DTLB 64 4KB
> > > entries fully associative, 64 4MB entries fully associative cpu0:
> > > smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var
> > > ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0:
> > > mwait min=64, max=64, IBE cpu1 at mainbus0: apid 17 (application
> > > processor) cpu1: AMD A9-9420 RADEON R5, 5 COMPUTE CORES 2C+3G,
> > > 2994.40 MHz, 15-70-00 cpu1:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,XSAVEOPT
> > > cpu1: 96KB 64b/line 3-way I-cache, 32KB 64b/line 8-way D-cache, 1MB
> > > 64b/line 16-way L2 cache cpu1: ITLB 48 4KB entries fully
> > > associative, 24 4MB entries fully associative cpu1: DTLB 64 4KB
> > > entries fully associative, 64 4MB entries fully associative cpu1:
> > > smt 1, core 0, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec00000,
> > > version 21, 24 pins, remapped ioapic1 at mainbus0: apid 5 pa
> > > 0xfec01000, version 21, 32 pins, remapped acpiprt0 at acpi0: bus 0
> > > (PCI0) acpiprt1 at acpi0: bus 1 (GPP0) acpiprt2 at acpi0: bus 2
> > > (GPP1) acpiprt3 at acpi0: bus 3 (GPP2)
> > > acpiprt4 at acpi0: bus -1 (GPP3)
> > > acpiprt5 at acpi0: bus -1 (GPP4)
> > > acpiprt6 at acpi0: bus -1 (GFX0)
> > > acpiprt7 at acpi0: bus -1 (GFX1)
> > > acpiprt8 at acpi0: bus -1 (GFX2)
> > > acpiprt9 at acpi0: bus -1 (GFX3)
> > > acpiprt10 at acpi0: bus -1 (GFX4)
> > > acpiec0 at acpi0
> > > acpicpu0 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
> > > acpicpu1 at acpi0: C2(0@400 io@0x414), C1(@1 halt!), PSS
> > > acpipwrres0 at acpi0: WRST
> > > acpipwrres1 at acpi0: P0U3, resource for XHC0
> > > acpipwrres2 at acpi0: P3U3, resource for XHC0
> > > acpipwrres3 at acpi0: P0U2, resource for EHC1
> > > acpipwrres4 at acpi0: P3U2, resource for EHC1
> > > acpipwrres5 at acpi0: P0SD, resource for SDIO
> > > acpipwrres6 at acpi0: P3SD, resource for SDIO
> > > acpipwrres7 at acpi0: P0ST, resource for SATA
> > > acpipwrres8 at acpi0: P3ST, resource for SATA
> > > acpitz0 at acpi0: critical temperature is 100 degC
> > > acpibtn0 at acpi0: PWRB
> > > acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> > > acpicmos0 at acpi0
> > > "PNP0C14" at acpi0 not configured
> > > "PNP0C14" at acpi0 not configured
> > > acpibtn1 at acpi0: SLPB
> > > acpiac0 at acpi0: AC unit online
> > > acpibat0 at acpi0: BAT1 model "AP16M5J" serial 3742 type LION oem
> > > "PANASONIC" acpibtn2 at acpi0: LID_
> > > "AMD0030" at acpi0 not configured
> > > "AMD0020" at acpi0 not configured
> > > "AMD0020" at acpi0 not configured
> > > "AMD0010" at acpi0 not configured
> > > "SYNA7DB5" at acpi0 not configured
> > > "AMD0010" at acpi0 not configured
> > > "MSFT0101" at acpi0 not configured
> > > acpivideo0 at acpi0: VGA_
> > > acpivideo1 at acpi0: VGA_
> > > acpivideo2 at acpi0: VGA_
> > > cpu0: 2994 MHz: speeds: 3000 2700 2400 2100 1800 1400 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
> > > "AMD AMD64 15h IOMMU" rev 0x00 at pci0 dev 0 function 2 not
> > > configured amdgpu0 at pci0 dev 1 function 0 "ATI Stoney Ridge" rev
> > > 0xda drm0 at amdgpu0
> > > amdgpu0: msi
> > > azalia0 at pci0 dev 1 function 1 vendor "ATI", unknown product
> > > 0x15b3 rev 0x00: msi azalia0: no supported codecs
> > > pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h Host" rev 0x00
> > > ppb0 at pci0 dev 2 function 1 "AMD AMD64 15h PCIE" rev 0x00: msi
> > > pci1 at ppb0 bus 1
> > > ppb1 at pci0 dev 2 function 2 "AMD AMD64 15h PCIE" rev 0x00: msi
> > > pci2 at ppb1 bus 2
> > > rtsx0 at pci2 dev 0 function 0 "Realtek RTL8411B Card Reader" rev
> > > 0x01: msi sdmmc0 at rtsx0: 4-bit, dma
> > > re0 at pci2 dev 0 function 1 "Realtek 8168" rev 0x12: RTL8411B
> > > (0x5c80), msi, address a8:1e:84:82:c3:0b rgephy0 at re0 phy 7:
> > > RTL8251 PHY, rev. 0 ppb2 at pci0 dev 2 function 3 "AMD AMD64 15h
> > > PCIE" rev 0x00: msi pci3 at ppb2 bus 3
> > > vendor "Atheros", unknown product 0x0042 (class network subclass
> > > miscellaneous, rev 0x31) at pci3 dev 0 function 0 not configured
> > > pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h Host" rev 0x00 "AMD
> > > AMD64 15h PSP 2.0" rev 0x00 at pci0 dev 8 function 0 not configured
> > > pchb3 at pci0 dev 9 function 0 "AMD AMD64 15h Host" rev 0x00
> > > azalia1 at pci0 dev 9 function 2 "AMD AMD64 15h HD Audio" rev 0x00:
> > > apic 5 int 22 azalia1: codecs: Realtek/0x0255 audio0 at azalia1
> > > xhci0 at pci0 dev 16 function 0 "AMD FCH xHCI" rev 0x20: msi, xHCI
> > > 1.0 usb0 at xhci0: USB revision 3.0
> > > uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev
> > > 3.00/1.00 addr 1 ahci0 at pci0 dev 17 function 0 "AMD FCH AHCI" rev
> > > 0x4b: apic 4 int 19, AHCI 1.3 ahci0: port 0: 6.0Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT0>
> > > naa.5002538e0978673a sd0: 476940MB, 512 bytes/sector, 976773168
> > > sectors, thin ehci0 at pci0 dev 18 function 0 "AMD FCH USB2" rev
> > > 0x49: apic 4 int 18 usb1 at ehci0: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
> > > 2.00/1.00 addr 1 "AMD FCH SMBus" rev 0x4b at pci0 dev 20 function 0
> > > not configured pcib0 at pci0 dev 20 function 3 "AMD FCH LPC" rev
> > > 0x11 pchb4 at pci0 dev 24 function 0 vendor "AMD", unknown product
> > > 0x15b0 rev 0x00 pchb5 at pci0 dev 24 function 1 vendor "AMD",
> > > unknown product 0x15b1 rev 0x00 pchb6 at pci0 dev 24 function 2
> > > vendor "AMD", unknown product 0x15b2 rev 0x00 pchb7 at pci0 dev 24
> > > function 3 vendor "AMD", unknown product 0x15b3 rev 0x00 pchb8 at
> > > pci0 dev 24 function 4 vendor "AMD", unknown product 0x15b4 rev
> > > 0x00 pchb9 at pci0 dev 24 function 5 vendor "AMD", unknown product
> > > 0x15b5 rev 0x00 isa0 at pcib0 isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > pms0: Synaptics clickpad, firmware 8.2, 0x1e2a1 0x840300
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > vmm0 at mainbus0: SVM/RVI
> > > efifb at mainbus0 not configured
> > > uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro
> > > Devices product 0x7900" rev 2.00/0.18 addr 2 urtwn0 at uhub2 port 1
> > > configuration 1 interface 0 "Realtek 802.11n WLAN Adapter" rev
> > > 2.00/2.00 addr 3 urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address
> > > 08:be:ac:07:f3:c5 ugen0 at uhub2 port 3 "Lite-On Technology product
> > > 0x3015" rev 2.01/0.01 addr 4 uvideo0 at uhub2 port 4 configuration 1
> > > interface 0 "KSVGA0500171401441LM06 VGA WebCam" rev 2.00/0.06 addr 5
> > > video0 at uvideo0 vscsi0 at root scsibus2 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus3 at softraid0: 256 targets
> > > root on sd0a (6c5e0f8fbd0b9634.a) swap on sd0b dump on sd0b
> > > initializing kernel modesetting (STONEY 0x1002:0x98E4 0x1025:0x1192
> > > 0xDA). amdgpu_irq_add_domain: stub
> > > amdgpu0: 1366x768, 32bpp
> > > wsdisplay0 at amdgpu0 mux 1: console (std, vt100 emulation), using
> > > wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB
> > > Optical Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
> > > ums0 at uhidev0: 3 buttons, Z dir
> > > wsmouse1 at ums0 mux 0
> > > wsmouse1 detached
> > > ums0 detached
> > > uhidev0 detached
> > > uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB
> > > Optical Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
> > > ums0 at uhidev0: 3 buttons, Z dir
> > > wsmouse1 at ums0 mux 0
> > > wsmouse1 detached
> > > ums0 detached
> > > uhidev0 detached
> > > uhidev0 at uhub0 port 7 configuration 1 interface 0 "PixArt USB
> > > Optical Mouse" rev 2.00/1.00 addr 2 uhidev0: iclass 3/1
> > > ums0 at uhidev0: 3 buttons, Z dir
> > > wsmouse1 at ums0 mux 0
> > >
>
