I am also getting this (or a similar) error on a different computer.
Please note that this might be a longer story. I'll put some details
before the dmesg.
drm:pid96852:intel_dp_aux_wait_done *ERROR* [drm] *ERROR* AUX C/DDI C/PHY C:
did not complete or timeout within 10ms (status 0xa023003f)
I don't know quite what to make of the overall story with this box.
It cannot boot even to the BIOS or anything at all on the screen unless
the DP is converted to a working HDMI port at the monitor.
I truly mean nothing at all shows up. DP directly to DP fails. Not
below. Then it works fine.
Right now, I am booting into HDMI. When it gets to the xenodm screen, I
have xenodm kill that DP->HDMI connection and switch over to the other DP
port on the computer and into a DP port on my 4k monitor instead.
I have to manually change to that port from my monitor. Annoying, but it
works 97% of the time.
I briefly used Windows 10 that came with the computer to verify a few
things. The display port does carry sound. Not on OpenBSD.
Back to just OpenBSD use.
The beep speaker carries real audio. I cannot find a way to turn
this off other than just using the headphone jack to grab the audio.
However, the actual beep by itself sticks around no matter what.
At some point I would like to add a video card that will let me run
programs like chrome or iridium. Any recommendations? I am clueless how
to figure out that question.
Thanks for any help. Sorry if I missed making anything clear. Just ask
for any clarifications.
--
Chris Bennett
OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34179473408 (32596MB)
avail mem = 33124184064 (31589MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec410 (93 entries)
bios0: vendor Dell Inc. version "A23" date 06/25/2018
bios0: Dell Inc. OptiPlex 9020
efi0 at bios0: UEFI 2.3.1
efi0: American Megatrends rev 0x4028d
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG SSDT
ASF! MSDM DMAR
acpi0: wakeup devices UAR1(S3) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4)
PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3)
XHC_(S4) HDEF(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3791.34 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3791.45 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3791.49 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, 3791.54 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 8MB 64b/line 16-way L3 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus -1 (PEG0)
acpiprt5 at acpi0: bus -1 (PEG1)
acpiprt6 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3791 MHz: speeds: 3601, 3600, 3400, 3200, 3000, 2800,
2600, 2400, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi, HASWELL, gen 7
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 16 com
com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address
18:66:da:02:db:be
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek ALC280
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd4: msi
pci4 at ppb3 bus 4
iwm0 at pci4 dev 0 function 0 "Intel AC 8260" rev 0x3a, msi
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel Q87 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 1.5Gb/s
ahci0: port 3: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, WDC WD2003FYYS-0, 01.0> naa.50014ee2b175a978
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVD+-RW GHB0N, A1C0> removable
cd1 at scsibus1 targ 3 lun 0: <HL-DT-ST, BD-RE WH14NS40, 1.05> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 5 configuration 1 interface 0 "SIGMACHIP USB Keyboard"
rev 1.10/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 5 configuration 1 interface 1 "SIGMACHIP USB Keyboard"
rev 1.10/3.30 addr 2
uhidev1: iclass 3/0, 2 report ids
ucc0 at uhidev1 reportid 1: 573 usages, 20 keys, array
wskbd2 at ucc0 mux 1
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd3 at ukbd1 mux 1
uhidev3 at uhub0 port 6 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev3: iclass 3/1, 8 report ids
ums0 at uhidev3 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
ucc1 at uhidev3 reportid 3: 767 usages, 20 keys, array
wskbd4 at ucc1 mux 1
uhid1 at uhidev3 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev3 reportid 8: input=1, output=0, feature=0
uhidev4 at uhub0 port 6 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/24.11 addr 3
uhidev4: iclass 3/0, 33 report ids
uhidpp0 at uhidev4 device 1 mouse "M570"
uhid3 at uhidev4 reportid 32: input=14, output=14, feature=0
uhid4 at uhidev4 reportid 33: input=31, output=31, feature=0
ugen0 at uhub0 port 13 "Intel Bluetooth" rev 2.00/0.01 addr 4
umass0 at uhub0 port 20 configuration 1 interface 0 "CalDigit Tuff" rev
3.10/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <CalDigit, Tuff, 0> serial.21881351180806001646
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.04 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (3df81be1dc31ec85.a) swap on sd0b dump on sd0b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wskbd4: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x200, fw ver 36.ca7b901d.0, address 14:ab:c5:41:88:b8
drm:pid96852:intel_dp_aux_wait_done *ERROR* [drm] *ERROR* AUX C/DDI C/PHY C:
did not complete or timeout within 10ms (status 0xa023003f)
drm:pid28973:intel_dp_aux_wait_done *ERROR* [drm] *ERROR* AUX C/DDI C/PHY C:
did not complete or timeout within 10ms (status 0xa013003f)
drm:pid28973:intel_dp_aux_wait_done *ERROR* [drm] *ERROR* AUX C/DDI C/PHY C:
did not complete or timeout within 10ms (status 0xa013003f)
iwm0: fatal firmware error
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
uhidev1 detached
uhidev0 at uhub0 port 5 configuration 1 interface 0 "SIGMACHIP USB Keyboard"
rev 1.10/3.30 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1 "SIGMACHIP USB Keyboard"
rev 1.10/3.30 addr 2
uhidev1: iclass 3/0, 2 report ids
ucc0 at uhidev1 reportid 1: 573 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
--
