Hi,
I used the command "cd /SRC && dump 0f - . | (cd /DST && restore -rf - )"
as suggested by the "Disk Setup" section of the FAQ to transfer everything
from one of my old hard disks to the one that should replace it. However,
I'm stuck with something around 35 megabytes/s of speed transfer (measured
using "systat -h io") following this path. If I use rsync, I get something
around 70 megabytes/s (measured by both the "--progress" option and
systat). Am I missing something? Is this to be expected?
I'm also getting an "undefined file type" error from dump. I found one guy
from the FreeBSD mail list that got the same error, but he solved his
problem using fsck on the partition. I forced fsck on my side, since the
filesystem was marked as clean, but to no avail.
I don't know if this information is relevant, but the partition I'm copying
the files from is mounted "ro,nodev,nosuid". The partition I'm copying the
files to is mounted "rw,nodev,nosuid".
Here is my dmesg:
OpenBSD 7.2 (GENERIC.MP) #5: Tue Jul 25 16:20:58 CEST 2023
r...@syspatch-72-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 6254428160 (5964MB)
avail mem = 6047461376 (5767MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (40 entries)
bios0: vendor Itautec ST 4262, LTD 6.00 PG version "FC" date 08/21/2009
bios0: Itautec S.A. Infoway
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET MCFG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S3) UAR2(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xd0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.27 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.26 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 2 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
acpicpu0 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
acpicpu1 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 2 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 2 int
20, address 6c:f0:49:fa:26:2e
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 2
int 22
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 2 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HUSKY SSD 128GB, V060>
t10.ATA_HUSKY_SSD_128GB_HSMB2282701594_
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0>
naa.50014ee208a32abd
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus1 targ 4 lun 0: <ATA, ST1000LM024 HN-M, 2BA3>
naa.50004cf40166a071
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
sd3 at scsibus1 targ 5 lun 0: <ATA, WDC WD20SPZX-08U, 02.0>
naa.50014ee2bc57c6f6
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02: apic 2
int 18
iic0 at ichiic0
iic0: addr 0x4e 01=32 03=32 04=32 12=ff 13=0f 20=0f 26=03 28=83 29=12 2a=12
2b=28 words 00=0032 01=3200 02=0032 03=3232 04=3200 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev2: iclass 3/0, 5 report ids
ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum
wskbd3 at ucc1 mux 1
uhid1 at uhidev2 reportid 5: input=0, output=0, feature=5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (83eecd80f6df3644.a) swap on sd0b dump on sd0b
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev0 detached
syncing disks... done
OpenBSD 7.2 (GENERIC.MP) #5: Tue Jul 25 16:20:58 CEST 2023
r...@syspatch-72-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 6254428160 (5964MB)
avail mem = 6047469568 (5767MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (40 entries)
bios0: vendor Itautec ST 4262, LTD 6.00 PG version "FC" date 08/21/2009
bios0: Itautec S.A. Infoway
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET MCFG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S3) UAR2(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xd0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.27 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.26 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 2 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
acpicpu0 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
acpicpu1 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 2 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 2 int
20, address 6c:f0:49:fa:26:2e
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 2
int 22
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 2 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HUSKY SSD 128GB, V060>
t10.ATA_HUSKY_SSD_128GB_HSMB2282701594_
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0>
naa.50014ee208a32abd
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus1 targ 4 lun 0: <ATA, ST1000LM024 HN-M, 2BA3>
naa.50004cf40166a071
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
sd3 at scsibus1 targ 5 lun 0: <ATA, WDC WD20SPZX-08U, 02.0>
naa.50014ee2bc57c6f6
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02: apic 2
int 18
iic0 at ichiic0
iic0: addr 0x4e 01=32 03=32 04=32 12=ff 13=0f 20=0f 26=03 28=83 29=12 2a=12
2b=28 words 00=0032 01=3200 02=0032 03=3232 04=3200 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev2: iclass 3/0, 5 report ids
ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum
wskbd3 at ucc1 mux 1
uhid1 at uhidev2 reportid 5: input=0, output=0, feature=5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (83eecd80f6df3644.a) swap on sd0b dump on sd0b
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev0 detached
syncing disks... done
rebooting...
OpenBSD 7.2 (GENERIC.MP) #5: Tue Jul 25 16:20:58 CEST 2023
r...@syspatch-72-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
GENERIC.MP
real mem = 6254428160 (5964MB)
avail mem = 6047477760 (5767MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (40 entries)
bios0: vendor Itautec ST 4262, LTD 6.00 PG version "FC" date 08/21/2009
bios0: Itautec S.A. Infoway
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET MCFG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5)
PEX5(S5) HUB0(S5) UAR1(S3) UAR2(S3) IGBE(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xd0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.28 MHz, 06-17-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2826.26 MHz, 06-17-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 6MB
64b/line 24-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus -1 (PEX4)
acpiprt6 at acpi0: bus -1 (PEX5)
acpiprt7 at acpi0: bus 2 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
com0 at acpi0 UAR1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com1 at acpi0 UAR2 addr 0x2f8/0x8 irq 3: ns16550a, 16 byte fifo
acpicpu0 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
acpicpu1 at acpi0: C1(@1 halt!), FVS, 2667, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 2 int 16, G45, gen 4
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 16 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: apic 2 int
20, address 6c:f0:49:fa:26:2e
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: apic 2
int 22
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801JD AHCI" rev 0x02: apic 2 int
19, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HUSKY SSD 128GB, V060>
t10.ATA_HUSKY_SSD_128GB_HSMB2282701594_
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD5000LPVT-0, 02.0>
naa.50014ee208a32abd
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
sd2 at scsibus1 targ 4 lun 0: <ATA, ST1000LM024 HN-M, 2BA3>
naa.50004cf40166a071
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
sd3 at scsibus1 targ 5 lun 0: <ATA, WDC WD20SPZX-08U, 02.0>
naa.50014ee2bc57c6f6
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02: apic 2
int 18
iic0 at ichiic0
iic0: addr 0x4e 01=32 03=32 04=32 12=ff 13=0f 20=0f 26=03 28=83 29=12 2a=12
2b=28 words 00=0032 01=3200 02=0032 03=3232 04=3200 05=0000 06=0000 07=0000
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL6
spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub3 port 2 configuration 1 interface 1 "Logitech USB Keyboard"
rev 1.10/64.02 addr 3
uhidev2: iclass 3/0, 5 report ids
ucc0 at uhidev2 reportid 1: 2 usages, 3 keys, enum
wskbd2 at ucc0 mux 1
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
ucc1 at uhidev2 reportid 3: 21 usages, 14 keys, enum
wskbd3 at ucc1 mux 1
uhid1 at uhidev2 reportid 5: input=0, output=0, feature=5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (83eecd80f6df3644.a) swap on sd0b dump on sd0b
inteldrm0: 1440x900, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wskbd3: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ucc0 detached
uhid0 detached
wskbd3: disconnecting from wsdisplay0
wskbd3 detached
ucc1 detached
uhid1 detached
uhidev2 detached
Thanks in advance for any help.
Cheers,
Vitor
