Hi,
I tried to install OpenBSD on an HP apollo 715/50 today:
The install kernel boots from CD and installs the system,
but when trying to reboot from disk, the kernel hangs
after "power0 at mainbus0: not available" (right before
the cpu0 line).
Any idea what could be wrong here?
I verified that /bsd on disk is the identical to the one
from CD (installer says "Relinking to create unique kernel... failed."
at the end).
I have a dmesg from the install kernel, and below that
another one when booting from disk (the same happens when
manually booting /bsd.rd instead of /bsd):
--- >>> cut >>> ---
>> OpenBSD/hppa CDBOOT 0.2
booting dk6a:/bsd.rd: 2707456+5047296+519168=0xff817c
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model 9 rev 1
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (RAMDISK) #933: Wed Mar 20 18:17:27 MDT 2024
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/RAMDISK
HP 9000/715/50 (Scorpio) PA-RISC 1.1a
real mem = 67108864 (64MB)
rsvd mem = 524288 (512KB)
avail mem = 53362688 (50MB)
random: boothowto does not indicate good seed
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
cpu0 at mainbus0 offset ffbe000 irq 31: PCXT L1-A 50MHz, FPU PCXT (Rolex -
CMOS-26B) rev 1
cpu0: 64K(32b/l) Icache, 64K(32b/l) wr-back Dcache, 120 coherent TLB, 16 BTLB
mem0 at mainbus0 offset ffbf000: viper rev 0, size 64MB
asp0 at mainbus0 offset 82f000: Scorpio rev 1, lan 1 scsi 7
gsc0 at asp0 irq 2
"Advanced audio (ext.)" at gsc0 (type a sv 7b mod 0 hv 70) offset 1000000 not
configured
"Core Centronics" at gsc0 (type a sv 74 mod 0 hv 70) offset 824000 not
configured
com1 at gsc0 offset 822000 irq 6: ns16550a, 16 byte fifo
com0 at gsc0 offset 823000 irq 5: ns16550a, 16 byte fifo
com0: console
hil0 at gsc0 offset 821000 irq 1
ie0 at gsc0 offset 826000 irq 8: i82596DX v0.0, address 08:00:09:78:25:c4
oosiop0 at gsc0 offset 825000 irq 9: NCR53C700 rev 0, 50MHz
scsibus0 at oosiop0: 8 targets, initiator 7
oosiop0: target 1 now using 8 bit asynchronous xfers
oosiop0: target 1 now using 8 bit asynchronous xfers
sd0 at scsibus0 targ 1 lun 0: <codesrc, SCSI2SD, 4.0>
serial.codesrc_SCSI2SD_2024050501_
sd0: 2048MB, 512 bytes/sector, 4194304 sectors
oosiop0: target 2 now using 8 bit asynchronous xfers
sd1 at scsibus0 targ 2 lun 0: <codesrc, SCSI2SD, 4.0>
serial.codesrc_SCSI2SD_2024050502_
sd1: 4096MB, 512 bytes/sector, 8388608 sectors
oosiop0: target 3 now using 8 bit asynchronous xfers
sd2 at scsibus0 targ 3 lun 0: <codesrc, SCSI2SD, 4.0>
serial.codesrc_SCSI2SD_2024050503_
sd2: 4096MB, 512 bytes/sector, 8388608 sectors
oosiop0: target 4 now using 8 bit asynchronous xfers
sd3 at scsibus0 targ 4 lun 0: <codesrc, SCSI2SD, 4.0>
serial.codesrc_SCSI2SD_2024050504_
sd3: 4736MB, 512 bytes/sector, 9700352 sectors
oosiop0: target 6 now using 8 bit synchronous xfers
oosiop0: target 6 now using 8 bit synchronous xfers
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, CD-ROM XM-6401TA, 1U01> removable
sti0 at mainbus0 offset 4000000: rev 8.02;10, ID 0x27F1239240A00499
sti0: HPA1991AC16, 2048x1024 frame buffer, 1024x768x8 display
sti0: 8x16 font type 1, 16 bpc, charset 0-255
wsdisplay0 at sti0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
softraid0 at root
scsibus1 at softraid0: 256 targets
oosiop0: target 1 now using 8 bit asynchronous xfers
hilkbd0 at hil0 code 1: 109-key keyboard, layout 1f
wskbd0 at hilkbd0 mux 1
wskbd0: connecting to wsdisplay0
"Mouse" at hil0 id 68 code 2 not configured
oosiop0: target 2 now using 8 bit asynchronous xfers
oosiop0: target 3 now using 8 bit asynchronous xfers
oosiop0: target 4 now using 8 bit asynchronous xfers
bootpath: 2/0/1.6 class=1 flags=0 hpa=0xf0825000 spa=0x0 io=0x6b24
root on rd0a swap on rd0b dump on rd0b
clock: failed to fetch (-13)
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/hppa 7.5 installation program.
--- <<< cut <<< ---
Disk boot:
--- >>> cut >>> ---
>> OpenBSD/hppa BOOT 1.11
boot>
NOTE: random seed is being reused.
booting dk4a:/bsd: 5107712+1823748+650236 [284920+110+279184+258064]=0xff817c
SPID bits: 0x0, error = -2
WARNING: PDC_COPROC error -3, assuming 1.1 FPU
[ using 822812 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (GENERIC) #946: Wed Mar 20 17:20:03 MDT 2024
dera...@hppa.openbsd.org:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/715/50 (Scorpio) PA-RISC 1.1a
real mem = 67108864 (64MB)
rsvd mem = 524288 (512KB)
avail mem = 55631872 (53MB)
random: boothowto does not indicate good seed
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
--- <<< cut <<< ---
Alex.
