Hello, Posting and re posting isn't going to get you help any quicker if no one has that card there won't be any interest and wifi is badly supported on any BSD. This looks more of a PR issue rather a ML issue
Chris Sent from Proton Mail Android -------- Original Message -------- On 5/10/24 12:34 PM, Mizsei Zoltán wrote: > Crossposting on misc aswell > > 2024. máj. 7. 14:50:33 Mizsei Zoltán <zmiz...@extrowerk.com>: > > Hi, > > I have a so called "Tenda 300Mbps Mini Wireless N Adapter" (this is not the > terribly small one). It reports itself as: > > urtwn0 at uhub0 port 2 configuration 1 interface 0 "Realtek 802.11n NIC" rev > 2.10/2.00 addr 2 > urtwn0: MAC/BB RTL8192EU, RF 6052 2T2R, address 50:2b:73:c9:11:00 > > It associates sucessfully with the AP, but it can't reliaby communicate > because OBSD reports 98% packet loss. However the same adapter works just > fine with the same router on the same machine using NetBSD. > > NetBSD reports: > [ 1.809012] urtwn0 at uhub3 port 1 > [ 1.809012] urtwn0: Realtek (0x0bda) 802.11n NIC (0x818b), rev 2.10/2.00, > addr 1 > [ 1.859025] urtwn0: MAC/BB RTL8192EU, RF 6052 2T2R, address 50:2b:73:c9:11:00 > [ 1.869029] urtwn0: 1 rx pipe, 3 tx pipes > > Interestingly OpenBSD thinks it is 2T2R while NBSD says it is 3T1R. <- maybe > a bug? > > This is the firmware from OpenBSD: > -rw-r--r-- 1 root bin 31818 Mar 20 22:17 urtwn-rtl8192eu > And this is the firmware from NetBSD: > -r--r--r-- 1 root bin 13904 May 7 14:31 urtwn-rtl8192eu > > As you can see, the file size is clearly different, so I have tried to > replace the OpenBSD firmware in /etc/firmware with the one from NetBSD, but > it fails to load correctly: > > urtwn0: timeout waiting for firmware readiness > > strings and file doesn't gives any hint about the content of the firmwares, > so I'd like to know what's the difference, and if it is possible to > update6replace the firmware in OBSD with the one from NetBSD? > > Thank You! > > --ext
