Jason Murray writes: [snip] > > So according to the raidctl(8) once I add the new HD to the system I do a > raidctl -a /dev/hd1d to add it as a spare, then do a raidctl -F component1 > raid0 to force a rebuild. Then I would modify my /etc/raid0.conf to > reflect my new device (which actually won't need modification in my case). > > First question: do I have this correct?
Yes. (s/hd1d/wd1d/ , of course) > Second question: if the rebuild fails at 48% with bad disk block errors > does this mean that wd0 is bad? Most likely. (it could be the new disk too, but that's less likely) Later... Greg Oster
