Re: HP ML110 failed install

[Ron Oliver]

On 2/22/07, Steve <[EMAIL PROTECTED]> wrote:

Ron,

Jonathan is after a dmesg and the output of

"usbdevs -v"

for the ML110. My box is currently parked with another tech. Is this something 
you can provide ?

Apologies for the delay, but here it is:

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, self powered, config 1, SE USB
Device(0x0000), ServerEngines(0x0000), rev 0.01
port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
--
Ron Oliver