Even though once when I booted, I was able to access the CD-ROM, I am
trying to figure out what broke in 4.4. I took a look at atapiscsi.c
trying to see if a change is making the drive time out. There are only
two changes in the file and they seem to involve timing out, but a
recompiled kernel with the old atapiscsi.c gives the same timeout
errors in dmesg and does not render the drive operable. If anyone has
a suggestion of something I can do to help make this work, I will do
my best to contribute.
On Wed, Nov 5, 2008 at 1:17 AM, Luke Tidd <[EMAIL PROTECTED]> wrote:
> hmm, looks like 4th time's a charm. Setup an ftp server to install,
> tried again, and it gave me the option for CD.
>
> On Wed, Nov 5, 2008 at 12:49 AM, Luke Tidd <[EMAIL PROTECTED]> wrote:
>> Hello, 4.3's installer didn't give me any grief, but 4.4 doesn't give
>> me an option to install from CD.
>>
>> System info:
>> Compaq Evo D510 SFF
>> 512MB RAM / 40GB IDE
>> IDE CD-ROM
>>
>> 4.3 dmesg ------------------------------------------------
>>
>> OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>> cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
>> real mem = 527986688 (503MB)
>> avail mem = 504332288 (480MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 12/30/02, BIOS32 rev. 0 @
>> 0xeba00, SMBIOS rev. 2.3 @ 0xfb360 (46 entries)
>> bios0: vendor Compaq version "686O2 v2.20" date 12/30/2002
>> bios0: Compaq Evo D510 SFF
>> acpi0 at bios0: rev 0, can't enable ACPI
>> bios0: ROM list: 0xc0000/0xac00! 0xcac00/0x1800 0xe1c00/0x9000!
>> cpu0 at mainbus0
>> pci at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
>> agp at pchb0 not configured
>> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
>> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 10
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
>> pci1 at ppb0 bus 5
>> fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VM" rev 0x81, i82562: irq
>> 5, address 00:0b:cd:43:a0:a6
>> inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
>> ichpcib0 at pci0 dev 31 function 0 "Intel \^X2801DB LPC" rev 0x01:
>> 24-bit timer at 3579545Hz
>> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> wd0 at pciide0 channel 0 drive 0: <ST340017A>
>> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8480B, 1.03> SCSI0
>> 5/cdrom removable
>> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
>> "Intel 82801DB AC97" rev 0x01 at pci0 dev 31 function 5 not configured
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> biomask ffe5 netmask ffe5 ttymask ffe7
>> rd0: fixed, 3800 blocks
>> uhub3 at uhub2 port 1 "vendor 0x05e3 USB Hub" rev 1.01/0.12 addr 2
>> uhidev0 at uhub3 port 1 configuration 1 interface 0 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0
>> wskbd1 at ukbd0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhidev1 at uhub3 port 1 configuration 1 interface 1 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev1: iclass 3/1, 4 report ids
>> uhid at uhidev1 reportid 1 not configured
>> uhid at uhidev1 reportid 2 not configured
>> uhid at uhidev1 reportid 3 not configured
>> uhid at uhidev1 reportid 4 not configured
>> uhidev2 at uhub3 port 2 configuration 1 interface 0 "Microsoft
>> Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 4
>> uhidev2: iclass 3/1
>> uhid at uhidev2 not configured
>> uhub4 at uhub3 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 5
>> uhidev3 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev3: iclass 3/1
>> ukbd1 at uhidev3
>> wskbd2 at ukbd1 mux 1
>> wskbd2: connecting to wsdisplay0
>> uhidev4 at uhub4 port 1 configuration 1 interface 1 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev4: iclass 3/0, 3 report ids
>> uhid at uhidev4 reportid 1 not configured
>> uhid at uhidev4 reportid 2 not configured
>> uhid at uhidev4 reportid 3 not configured
>> root on rd0a swap on rd0b dump on rd0b
>> OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>> cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
>> real mem = 527986688 (503MB)
>> avail mem = 504332288 (480MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 12/30/02, BIOS32 rev. 0 @
>> 0xeba00, SMBIOS rev. 2.3 @ 0xfb360 (46 entries)
>> bios0: vendor Compaq version "686O2 v2.20" date 12/30/2002
>> bios0: Compaq Evo D510 SFF
>> acpi0 at bios0: rev 0, can't enable ACPI
>> bios0: ROM list: 0xc0000/0xac00! 0xcac00/0x1800 0xe1c00/0x9000!
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
>> agp at pchb0 not configured
>> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
>> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 10
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
>> pci1 at ppb0 bus 5
>> fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VM" rev 0x81, i82562: irq
>> 5, address 00:0b:cd:43:a0:a6
>> inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01:
>> 24-bit timer at 3579545Hz
>> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> wd0 at pciide0 channel 0 drive 0: <ST340017A>
>> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> atapiscsi0(pciide0:1:0): using PIO mode 4
>> "Intel 82801DB AC97" rev 0x01 at pci0 dev 31 function 5 not configured
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> biomask ffe5 netmask ffe5 ttymask ffe7
>> rd0: fixed, 3800 blocks
>> uhub3 at uhub2 port 1 "vendor 0x05e3 USB Hub" rev 1.01/0.12 addr 2
>> uhidev0 at uhub3 port 1 configuration 1 interface 0 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0
>> wskbd1 at ukbd0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhidev1 at uhub3 port 1 configuration 1 interface 1 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev1: iclass 3/1, 4 report ids
>> uhid at uhidev1 reportid 1 not configured
>> uhid at uhidev1 reportid 2 not configured
>> uhid at uhidev1 reportid 3 not configured
>> uhid at uhidev1 reportid 4 not configured
>> uhidev2 at uhub3 port 2 configuration 1 interface 0 "Microsoft
>> Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 4
>> uhidev2: iclass 3/1
>> uhid at uhidev2 not configured
>> uhub4 at uhub3 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 5
>> uhidev3 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev3: iclass 3/1
>> ukbd1 at uhidev3
>> wskbd2 at ukbd1 mux 1
>> wskbd2: connecting to wsdisplay0
>> uhidev4 at uhub4 port 1 configuration 1 interface 1 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev4: iclass 3/0, 3 report ids
>> uhid at uhidev4 reportid 1 not configured
>> uhid at uhidev4 reportid 2 not configured
>> uhid at uhidev4 reportid 3 not configured
>> root on rd0a swap on rd0b dump on rd0b
>>
>>
>>
>> 4.4 dmesg --------------------------------------------
>>
>> OpenBSD 4.4 (RAMDISK_CD) #857: Tue Aug 12 17:31:49 MDT 2008
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>> cpu0: Intel(R) Pentium(R) 4 CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
>> real mem = 527986688 (503MB)
>> avail mem = 503934976 (480MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 12/30/02, BIOS32 rev. 0 @
>> 0xeba00, SMBIOS rev. 2.3 @ 0xfb360 (46 entries)
>> bios0: vendor Compaq version "686O2 v2.20" date 12/30/2002
>> bios0: Compaq Evo D510 SFF
>> acpi0 at bios0: rev 0
>> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT SSDT APIC SSDT
>> SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
>> acpiprt0 at acpi0: bus 5 (HUB_)
>> acpiprt1 at acpi0: bus 0 (PCI0)
>> bios0: ROM list: 0xc0000/0xac00! 0xcac00/0x1800 0xe1c00/0x9000!
>> cpu0 at mainbus0
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
>> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
>> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 5
>> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 10
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
>> pci1 at ppb0 bus 5
>> fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VM" rev 0x81, i82562: irq
>> 5, address 00:0b:cd:43:a0:a6
>> inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
>> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
>> channel 0 configured to compatibility, channel 1 configured to
>> compatibility
>> wd0 at pciide0 channel 0 drive 0: <ST340017A>
>> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> atapiscsi0 at pciide0 channel 1 drive 0
>> scsibus0 at atapiscsi0: 2 targets, initiator 7
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> wdc_atapi_start: not ready, st = 58
>> atapiscsi0(pciide0:1:0): using PIO mode 4
>> "Intel 82801DB AC97" rev 0x01 at pci0 dev 31 function 5 not configured
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> biomask ffe5 netmask ffe5 ttymask ffff
>> rd0: fixed, 3800 blocks
>> uhub3 at uhub2 port 1 "vendor 0x05e3 USB Hub" rev 1.01/0.12 addr 2
>> uhidev0 at uhub3 port 1 configuration 1 interface 0 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0
>> wskbd1 at ukbd0 mux 1
>> wskbd1: connecting to wsdisplay0
>> uhidev1 at uhub3 port 1 configuration 1 interface 1 "USB KVM Switch 4
>> PORT V1.5 USB KVM Switch 4 PORT V1.5" rev 1.10/1.50 addr 3
>> uhidev1: iclass 3/1, 4 report ids
>> uhid at uhidev1 reportid 1 not configured
>> uhid at uhidev1 reportid 2 not configured
>> uhid at uhidev1 reportid 3 not configured
>> uhid at uhidev1 reportid 4 not configured
>> uhidev2 at uhub3 port 2 configuration 1 interface 0 "Microsoft
>> Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 4
>> uhidev2: iclass 3/1
>> uhid at uhidev2 not configured
>> uhub4 at uhub3 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 5
>> uhidev3 at uhub4 port 1 configuration 1 interface 0 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev3: iclass 3/1
>> ukbd1 at uhidev3
>> wskbd2 at ukbd1 mux 1
>> wskbd2: connecting to wsdisplay0
>> uhidev4 at uhub4 port 1 configuration 1 interface 1 "Dell Dell USB
>> Keyboard" rev 1.10/2.00 addr 6
>> uhidev4: iclass 3/0, 3 report ids
>> uhid at uhidev4 reportid 1 not configured
>> uhid at uhidev4 reportid 2 not configured
>> uhid at uhidev4 reportid 3 not configured
>> softraid0 at root
>> root on rd0a swap on rd0b dump on rd0b
>>
>>
>> --
>> Luke Tidd
>> LTCS
>> 2131 Bolton Rd. NW
>> Atlanta, GA 30318
>> cell: 678-294-2604
>> fax: 678-317-0952
>>
>
>
>
> --
> Luke Tidd
> LTCS
> 2131 Bolton Rd. NW
> Atlanta, GA 30318
> cell: 678-294-2604
> fax: 678-317-0952
>
--
Luke Tidd
LTCS
2131 Bolton Rd. NW
Atlanta, GA 30318
cell: 678-294-2604
fax: 678-317-0952
