Author: rloach
Date: 2006-06-22 01:13:15 -0400 (Thu, 22 Jun 2006)
New Revision: 61930
Modified:
trunk/tao/src/Tao.Platform.Windows/Winmm.cs
Log:
Joystick bindings.
Modified: trunk/tao/src/Tao.Platform.Windows/Winmm.cs
===================================================================
--- trunk/tao/src/Tao.Platform.Windows/Winmm.cs 2006-06-22 01:46:25 UTC (rev
61929)
+++ trunk/tao/src/Tao.Platform.Windows/Winmm.cs 2006-06-22 05:13:15 UTC (rev
61930)
@@ -218,6 +218,421 @@
// #define TIMERR_NOCANDO (TIMERR_BASE+1) /* request not completed */
public static Int32 TIMERR_NOCANDO = TIMERR_BASE + 1;
#endregion Int32 TIMERR_NOCANDO
+
+ #region Int32 JOY_BUTTON1
+ /// <summary>
+ /// First joystick button is pressed.
+ /// </summary>
+ // #define JOY_BUTTON1 1
+ public static Int32 JOY_BUTTON1 = 1;
+ #endregion Int32 JOY_BUTTON1
+
+ #region Int32 JOY_BUTTON2
+ /// <summary>
+ /// Second joystick button is pressed.
+ /// </summary>
+ // #define JOY_BUTTON2 2
+ public static Int32 JOY_BUTTON2 = 2;
+ #endregion Int32 JOY_BUTTON2
+
+ #region Int32 JOY_BUTTON3
+ /// <summary>
+ /// Third joystick button is pressed.
+ /// </summary>
+ // #define JOY_BUTTON3 4
+ public static Int32 JOY_BUTTON3 = 4;
+ #endregion Int32 JOY_BUTTON3
+
+ #region Int32 JOY_BUTTON4
+ /// <summary>
+ /// Four joystick button is pressed.
+ /// </summary>
+ // #define JOY_BUTTON4 8
+ public static Int32 JOY_BUTTON4 = 8;
+ #endregion Int32 JOY_BUTTON4
+
+ #region Int32 JOYCAPS_HASZ
+ /// <summary>
+ /// Joystick has z-coordinate information.
+ /// </summary>
+ // #define JOYCAPS_HASZ 1
+ public static Int32 JOYCAPS_HASZ = 1;
+ #endregion Int32 JOYCAPS_HASZ
+
+ #region Int32 JOYCAPS_HASR
+ /// <summary>
+ /// Joystick has rudder (fourth axis) information.
+ /// </summary>
+ // #define JOYCAPS_HASR 2
+ public static Int32 JOYCAPS_HASR = 2;
+ #endregion Int32 JOYCAPS_HASR
+
+ #region Int32 JOYCAPS_HASU
+ /// <summary>
+ /// Joystick has u-coordinate (fifth axis) information.
+ /// </summary>
+ // #define JOYCAPS_HASU 4
+ public static Int32 JOYCAPS_HASU = 4;
+ #endregion Int32 JOYCAPS_HASU
+
+ #region Int32 JOYCAPS_HASV
+ /// <summary>
+ /// Joystick has v-coordinate (sixth axis) information.
+ /// </summary>
+ // #define JOYCAPS_HASU 8
+ public static Int32 JOYCAPS_HASV = 8;
+ #endregion Int32 JOYCAPS_HASV
+
+ #region Int32 JOYCAPS_HASPOV
+ /// <summary>
+ /// Joystick has point-of-view information.
+ /// </summary>
+ // #define JOYCAPS_HASPOV 16
+ public static Int32 JOYCAPS_HASPOV = 16;
+ #endregion Int32 JOYCAPS_HASPOV
+
+ #region Int32 JOYCAPS_POV4DIR
+ /// <summary>
+ /// Joystick point-of-view supports discrete values (centered,
forward, backward, left, and right).
+ /// </summary>
+ // #define JOYCAPS_HASPOV 32
+ public static Int32 JOYCAPS_POV4DIR = 32;
+ #endregion Int32 JOYCAPS_POV4DIR
+
+ #region Int32 JOYCAPS_POVCTS
+ /// <summary>
+ /// Joystick point-of-view supports continuous degree bearings.
+ /// </summary>
+ // #define JOYCAPS_POVCTS 32
+ public static Int32 JOYCAPS_POVCTS = 64;
+ #endregion Int32 JOYCAPS_POVCTS
+
+ #region Int32 JOY_RETURNX
+ /// <summary></summary>
+ // #define JOY_RETURNX 0x00000001
+ public static Int32 JOY_RETURNX = 0x00000001;
+ #endregion Int32 JOY_RETURNX
+
+ #region Int32 JOY_RETURNY
+ /// <summary></summary>
+ // #define JOY_RETURNY 0x00000002
+ public static Int32 JOY_RETURNY = 0x00000002;
+ #endregion Int32 JOY_RETURNY
+
+ #region Int32 JOY_RETURNZ
+ /// <summary></summary>
+ // #define JOY_RETURNZ 0x00000002
+ public static Int32 JOY_RETURNZ = 0x00000004;
+ #endregion Int32 JOY_RETURNZ
+
+ #region Int32 JOY_RETURNR
+ /// <summary></summary>
+ // #define JOY_RETURNR 0x00000008
+ public static Int32 JOY_RETURNR = 0x00000008;
+ #endregion Int32 JOY_RETURNR
+
+ #region Int32 JOY_RETURNU
+ /// <summary></summary>
+ // #define JOY_RETURNU 0x00000010
+ public static Int32 JOY_RETURNU = 0x00000010;
+ #endregion Int32 JOY_RETURNU
+
+ #region Int32 JOY_RETURNV
+ /// <summary></summary>
+ // #define JOY_RETURNV 0x00000020
+ public static Int32 JOY_RETURNV = 0x00000020;
+ #endregion Int32 JOY_RETURNV
+
+ #region Int32 JOY_RETURNPOV
+ /// <summary></summary>
+ // #define JOY_RETURNPOV 0x00000040
+ public static Int32 JOY_RETURNPOV = 0x00000040;
+ #endregion Int32 JOY_RETURNPOV
+
+ #region Int32 JOY_RETURNBUTTONS
+ /// <summary></summary>
+ // #define JOY_RETURNBUTTONS 0x00000080
+ public static Int32 JOY_RETURNBUTTONS = 0x00000080;
+ #endregion Int32 JOY_RETURNBUTTONS
+
+ #region Int32 JOY_RETURNRAWDATA
+ /// <summary></summary>
+ // #define JOY_RETURNRAWDATA 0x00000100
+ public static Int32 JOY_RETURNRAWDATA = 0x00000100;
+ #endregion Int32 JOY_RETURNRAWDATA
+
+ #region Int32 JOY_RETURNPOVCTS
+ /// <summary></summary>
+ // #define JOY_RETURNPOVCTS 0x00000200
+ public static Int32 JOY_RETURNPOVCTS = 0x00000200;
+ #endregion Int32 JOY_RETURNPOVCTS
+
+ #region Int32 JOY_RETURNCENTERED
+ /// <summary></summary>
+ // #define JOY_RETURNCENTERED 0x00000200
+ public static Int32 JOY_RETURNCENTERED = 0x00000400;
+ #endregion Int32 JOY_RETURNCENTERED
+
+ #region Int32 JOY_USEDEADZONE
+ /// <summary></summary>
+ // #define JOY_USEDEADZONE 0x00000800
+ public static Int32 JOY_USEDEADZONE = 0x00000800;
+ #endregion Int32 JOY_USEDEADZONE
+
+ #region Int32 JOY_RETURNALL
+ /// <summary></summary>
+ // #define JOY_RETURNALL (JOY_RETURNX | JOY_RETURNY | JOY_RETURNZ |
+ // JOY_RETURNR | JOY_RETURNU | JOY_RETURNV |
+ // JOY_RETURNPOV | JOY_RETURNBUTTONS)
+ public static Int32 JOY_RETURNALL = (JOY_RETURNX | JOY_RETURNY |
JOY_RETURNZ | JOY_RETURNR | JOY_RETURNU | JOY_RETURNV | JOY_RETURNPOV |
JOY_RETURNBUTTONS);
+ #endregion Int32 JOY_RETURNALL
+
+ #region Int32 JOY_CAL_READALWAYS
+ /// <summary></summary>
+ // #define JOY_CAL_READALWAYS 0x00010000
+ public static Int32 JOY_CAL_READALWAYS = 0x00010000;
+ #endregion Int32 JOY_CAL_READALWAYS
+
+ #region Int32 JOY_CAL_READXYONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READXYONLY 0x00010000
+ public static Int32 JOY_CAL_READXYONLY = 0x00020000;
+ #endregion Int32 JOY_CAL_READXYONLY
+
+ #region Int32 JOY_CAL_READ3
+ /// <summary></summary>
+ // #define JOY_CAL_READ3 0x00040000
+ public static Int32 JOY_CAL_READ3 = 0x00040000;
+ #endregion Int32 JOY_CAL_READ3
+
+ #region Int32 JOY_CAL_READ4
+ /// <summary></summary>
+ // #define JOY_CAL_READ4 0x00080000
+ public static Int32 JOY_CAL_READ4 = 0x00080000;
+ #endregion Int32 JOY_CAL_READ4
+
+ #region Int32 JOY_CAL_READXONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READXONLY 0x00100000
+ public static Int32 JOY_CAL_READXONLY = 0x00100000;
+ #endregion Int32 JOY_CAL_READXONLY
+
+ #region Int32 JOY_CAL_READYONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READXONLY 0x00200000
+ public static Int32 JOY_CAL_READYONLY = 0x00200000;
+ #endregion Int32 JOY_CAL_READYONLY
+
+ #region Int32 JOY_CAL_READ5
+ /// <summary></summary>
+ // #define JOY_CAL_READ5 0x00400000
+ public static Int32 JOY_CAL_READ5 = 0x00400000;
+ #endregion Int32 JOY_CAL_READ5
+
+ #region Int32 JOY_CAL_READ6
+ /// <summary></summary>
+ // #define JOY_CAL_READ6 0x00800000
+ public static Int32 JOY_CAL_READ6 = 0x00800000;
+ #endregion Int32 JOY_CAL_READ6
+
+ #region Int32 JOY_CAL_READZONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READZONLY 0x00800000
+ public static Int32 JOY_CAL_READZONLY = 0x00800000;
+ #endregion Int32 JOY_CAL_READZONLY
+
+ #region Int32 JOY_CAL_READRONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READRONLY 0x02000000
+ public static Int32 JOY_CAL_READRONLY = 0x02000000;
+ #endregion Int32 JOY_CAL_READRONLY
+
+ #region Int32 JOY_CAL_READUONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READUONLY 0x04000000
+ public static Int32 JOY_CAL_READUONLY = 0x04000000;
+ #endregion Int32 JOY_CAL_READUONLY
+
+ #region Int32 JOY_CAL_READVONLY
+ /// <summary></summary>
+ // #define JOY_CAL_READVONLY 0x04000000
+ public static Int32 JOY_CAL_READVONLY = 0x08000000;
+ #endregion Int32 JOY_CAL_READVONLY
+
+ #region Int32 JOY_POVCENTERED
+ /// <summary></summary>
+ // #define JOY_POVCENTERED (WORD) -1
+ public static Int32 JOY_POVCENTERED = -1;
+ #endregion Int32 JOY_POVCENTERED
+
+ #region Int32 JOY_POVFORWARD
+ /// <summary></summary>
+ // #define JOY_POVFORWARD 0
+ public static Int32 JOY_POVFORWARD = 0;
+ #endregion Int32 JOY_POVFORWARD
+
+ #region Int32 JOY_POVRIGHT
+ /// <summary></summary>
+ // #define JOY_POVRIGHT 9000
+ public static Int32 JOY_POVRIGHT = 9000;
+ #endregion Int32 JOY_POVRIGHT
+
+ #region Int32 JOY_POVBACKWARD
+ /// <summary></summary>
+ // #define JOY_POVBACKWARD 18000
+ public static Int32 JOY_POVBACKWARD = 18000;
+ #endregion Int32 JOY_POVBACKWARD
+
+ #region Int32 JOY_POVLEFT
+ /// <summary></summary>
+ // #define JOY_POVLEFT 27000
+ public static Int32 JOY_POVLEFT = 27000;
+ #endregion Int32 JOY_POVLEFT
+
+ #region Int32 MMSYSERR_BASE
+ /// <summary></summary>
+ // #define MMSYSERR_BASE 0
+ public static Int32 MMSYSERR_BASE = 0;
+ #endregion Int32 MMSYSERR_BASE
+
+ #region Int32 MMSYSERR_NOERROR
+ /// <summary></summary>
+ // #define MMSYSERR_NOERROR 0
+ public static Int32 MMSYSERR_NOERROR = 0;
+ #endregion Int32 MMSYSERR_NOERROR
+
+ #region Int32 MMSYSERR_ERROR
+ /// <summary></summary>
+ // #define MMSYSERR_ERROR 1
+ public static Int32 MMSYSERR_ERROR = 1;
+ #endregion Int32 MMSYSERR_ERROR
+
+ #region Int32 MMSYSERR_BADDEVICEID
+ /// <summary></summary>
+ // #define MMSYSERR_BADDEVICEID 2
+ public static Int32 MMSYSERR_BADDEVICEID = 2;
+ #endregion Int32 MMSYSERR_BADDEVICEID
+
+ #region Int32 MMSYSERR_NOTENABLED
+ /// <summary></summary>
+ // #define MMSYSERR_NOTENABLED 3
+ public static Int32 MMSYSERR_NOTENABLED = 3;
+ #endregion Int32 MMSYSERR_NOTENABLED
+
+ #region Int32 MMSYSERR_ALLOCATED
+ /// <summary></summary>
+ // #define MMSYSERR_ALLOCATED 4
+ public static Int32 MMSYSERR_ALLOCATED = 4;
+ #endregion Int32 MMSYSERR_ALLOCATED
+
+ #region Int32 MMSYSERR_INVALHANDLE
+ /// <summary></summary>
+ // #define MMSYSERR_INVALHANDLE 5
+ public static Int32 MMSYSERR_INVALHANDLE = 5;
+ #endregion Int32 MMSYSERR_INVALHANDLE
+
+ #region Int32 MMSYSERR_NODRIVER
+ /// <summary></summary>
+ // #define MMSYSERR_NODRIVER 6
+ public static Int32 MMSYSERR_NODRIVER = 6;
+ #endregion Int32 MMSYSERR_NODRIVER
+
+ #region Int32 MMSYSERR_NOMEM
+ /// <summary></summary>
+ // #define MMSYSERR_NOMEM 7
+ public static Int32 MMSYSERR_NOMEM = 7;
+ #endregion Int32 MMSYSERR_NOMEM
+
+ #region Int32 MMSYSERR_NOTSUPPORTED
+ /// <summary></summary>
+ // #define MMSYSERR_NOTSUPPORTED 8
+ public static Int32 MMSYSERR_NOTSUPPORTED = 8;
+ #endregion Int32 MMSYSERR_NOTSUPPORTED
+
+ #region Int32 MMSYSERR_BADERRNUM
+ /// <summary></summary>
+ // #define MMSYSERR_BADERRNUM 9
+ public static Int32 MMSYSERR_BADERRNUM = 9;
+ #endregion Int32 MMSYSERR_BADERRNUM
+
+ #region Int32 MMSYSERR_INVALFLAG
+ /// <summary></summary>
+ // #define MMSYSERR_INVALFLAG 10
+ public static Int32 MMSYSERR_INVALFLAG = 10;
+ #endregion Int32 MMSYSERR_INVALFLAG
+
+ #region Int32 MMSYSERR_INVALPARAM
+ /// <summary></summary>
+ // #define MMSYSERR_INVALPARAM 11
+ public static Int32 MMSYSERR_INVALPARAM = 11;
+ #endregion Int32 MMSYSERR_INVALPARAM
+
+ #region Int32 MMSYSERR_LASTERROR
+ /// <summary></summary>
+ // #define MMSYSERR_LASTERROR 11
+ public static Int32 MMSYSERR_LASTERROR = 11;
+ #endregion Int32 MMSYSERR_LASTERROR
+
+ #region Int32 JOYERR_NOERROR
+ /// <summary></summary>
+ // #define JOYERR_NOERROR 0
+ public static Int32 JOYERR_NOERROR = 0;
+ #endregion Int32 JOYERR_NOERROR
+
+ #region Int32 JOYERR_PARMS
+ /// <summary></summary>
+ // #define JOYERR_PARMS 165
+ public static Int32 JOYERR_PARMS = 165;
+ #endregion Int32 JOYERR_PARMS
+
+ #region Int32 JOYERR_NOCANDO
+ /// <summary></summary>
+ // #define JOYERR_NOCANDO 166
+ public static Int32 JOYERR_NOCANDO = 166;
+ #endregion Int32 JOYERR_NOCANDO
+
+ #region Int32 JOYERR_UNPLUGGED
+ /// <summary></summary>
+ // #define JOYERR_UNPLUGGED 167
+ public static Int32 JOYERR_UNPLUGGED = 167;
+ #endregion Int32 JOYERR_UNPLUGGED
+
+ #region Int32 JOYSTICKID1
+ /// <summary></summary>
+ // #define JOYSTICKID1 0
+ public static Int32 JOYSTICKID1 = 0;
+ #endregion Int32 JOYSTICKID1
+
+ #region Int32 JOYSTICKID2
+ /// <summary></summary>
+ // #define JOYSTICKID2 1
+ public static Int32 JOYSTICKID2 = 1;
+ #endregion Int32 JOYSTICKID2
+
+ #region Int32 MM_JOY1MOVE
+ /// <summary></summary>
+ // #define MM_JOY1MOVE 0x3A0
+ public static Int32 MM_JOY1MOVE = 0x3A0;
+ #endregion Int32 MM_JOY1MOVE
+
+ #region Int32 MM_JOY2MOVE
+ /// <summary></summary>
+ // #define MM_JOY2MOVE 0x3A1
+ public static Int32 MM_JOY2MOVE = 0x3A1;
+ #endregion Int32 MM_JOY2MOVE
+
+ #region Int32 MM_JOY1ZMOVE
+ /// <summary></summary>
+ // #define MM_JOY1ZMOVE 0x3A2
+ public static Int32 MM_JOY1ZMOVE = 0x3A2;
+ #endregion Int32 MM_JOY1ZMOVE
+
+ #region Int32 MM_JOY2ZMOVE
+ /// <summary></summary>
+ // #define MM_JOY2ZMOVE 0x3A3
+ public static Int32 MM_JOY2ZMOVE = 0x3A3;
+ #endregion Int32 MM_JOY2ZMOVE
+
#endregion Public Constants
// --- Constructors & Destructors ---
@@ -229,6 +644,337 @@
}
#endregion Winmm()
+ // --- Structures & Classes ---
+ #region JOYCAPS
+ /// <summary>
+ /// The JOYCAPS structure contains information about the joystick
capabilities.
+ /// </summary>
+ /// <remarks>
+ /// <para>
+ /// <b>Requirements</b>
+ /// </para>
+ /// <para>
+ /// Windows NT/2000/XP: Included in Windows NT 3.1 and later.
+ /// Windows 95/98/Me: Included in Windows 95 and later.
+ /// Header: Declared in Mmsystem.h; include Windows.h.
+ /// Unicode: Declared as Unicode and ANSI structures.
+ /// </para>
+ /// </remarks>
+ /// <seealso cref="Winmm.JOYINFO"/>
+ /// <seealso cref="Winmm.JOYINFOEX"/>
+ /// <seealso cref="Winmm.joySetCapture"/>
+ [StructLayout(LayoutKind.Sequential)]
+ public struct JOYCAPS
+ {
+ /// <summary>
+ /// Manufacturer identifier. Manufacturer identifiers are
defined in Manufacturer and Product Identifiers.
+ /// </summary>
+ [CLSCompliant(false)]
+ public ushort wMid;
+ /// <summary>
+ /// Product identifier. Product identifiers are defined in
Manufacturer and Product Identifiers.
+ /// </summary>
+ [CLSCompliant(false)]
+ public ushort wPid;
+ /// <summary>
+ /// Null-terminated string containing the joystick product
name.
+ /// </summary>
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
+ public String szPname;
+ /// <summary>
+ /// Minimum X-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wXmin;
+ /// <summary>
+ /// Maximum X-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wXmax;
+ /// <summary>
+ /// Minimum Y-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wYmin;
+ /// <summary>
+ /// Maximum Y-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wYmax;
+ /// <summary>
+ /// Minimum Z-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wZmin;
+ /// <summary>
+ /// Maximum Z-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wZmax;
+ /// <summary>
+ /// Number of joystick buttons.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wNumButtons;
+ /// <summary>
+ /// Smallest polling frequency supported when captured by the
<see cref="joySetCapture"/> function.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wPeriodMin;
+ /// <summary>
+ /// Largest polling frequency supported when captured by <see
cref="joySetCapture"/>.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wPeriodMax;
+ /// <summary>
+ /// Minimum rudder value. The rudder is a fourth axis of
movement.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wRmin;
+ /// <summary>
+ /// Maximum rudder value. The rudder is a fourth axis of
movement.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wRmax;
+ /// <summary>
+ /// Minimum u-coordinate (fifth axis) values.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wUmin;
+ /// <summary>
+ /// Maximum u-coordinate (fifth axis) values.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wUmax;
+ /// <summary>
+ /// Minimum v-coordinate (sixth axis) values.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wVmin;
+ /// <summary>
+ /// Maximum v-coordinate (sixth axis) values.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wVmax;
+ /// <summary>
+ /// Joystick capabilities The following flags define
individual capabilities that a joystick might have:
+ /// </summary>
+ /// <remarks>
+ /// <see cref="JOYCAPS_HASZ"/> - Joystick has z-coordinate
information.
+ /// <see cref="JOYCAPS_HASR"/> - Joystick has rudder (fourth
axis) information.
+ /// <see cref="JOYCAPS_HASU"/> - Joystick has u-coordinate
(fifth axis) information.
+ /// <see cref="JOYCAPS_HASV"/> - Joystick has v-coordinate
(sixth axis) information.
+ /// <see cref="JOYCAPS_HASPOV"/> - Joystick has point-of-view
information.
+ /// <see cref="JOYCAPS_POV4DIR"/> - Joystick point-of-view
supports discrete values (centered, forward, backward, left, and right).
+ /// <see cref="JOYCAPS_POVCTS"/> - Joystick point-of-view
supports continuous degree bearings.
+ /// </remarks>
+ [CLSCompliant(false)]
+ public uint wCaps;
+ /// <summary>
+ /// Maximum number of axes supported by the joystick.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wMaxAxes;
+ /// <summary>
+ /// Number of axes currently in use by the joystick.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wNumAxes;
+ /// <summary>
+ /// Maximum number of buttons supported by the joystick.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wMaxButtons;
+ /// <summary>
+ /// Null-terminated string containing the registry key for the
joystick.
+ /// </summary>
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 32)]
+ public String szRegKey;
+ /// <summary>
+ /// Null-terminated string identifying the joystick driver OEM.
+ /// </summary>
+ [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 260)]
+ public String szOEMVxD;
+ }
+ #endregion JOYCAPS
+
+ #region JOYINFO
+ /// <summary>
+ /// The JOYINFO structure contains information about the joystick
position and button state.
+ /// </summary>
+ /// <remarks>
+ /// <para>
+ /// <b>Requirements</b>
+ /// </para>
+ /// <para>
+ /// Windows NT/2000/XP: Included in Windows NT 3.1 and later.
+ /// Windows 95/98/Me: Included in Windows 95 and later.
+ /// Header: Declared in Mmsystem.h; include Windows.h.
+ /// </para>
+ /// </remarks>
+ [StructLayout(LayoutKind.Sequential)]
+ public struct JOYINFO
+ {
+ /// <summary>
+ /// Current X-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wXpos;
+ /// <summary>
+ /// Current Y-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wYpos;
+ /// <summary>
+ /// Current Z-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint wZpos;
+ /// <summary>
+ /// Current state of joystick buttons.
+ /// </summary>
+ /// <remarks>
+ /// <para>According to one or more of the following
values:</para>
+ /// <para>
+ /// <see cref="JOY_BUTTON1"/> - First joystick button is
pressed.
+ /// <see cref="JOY_BUTTON2"/> - Second joystick button is
pressed.
+ /// <see cref="JOY_BUTTON3"/> - Third joystick button is
pressed.
+ /// <see cref="JOY_BUTTON4"/> - Fourth joystick button is
pressed.
+ /// </para>
+ /// </remarks>
+ [CLSCompliant(false)]
+ public uint wButtons;
+ }
+ #endregion JOYINFO
+
+ #region JOYINFOEX
+ /// <summary>
+ /// The JOYINFOEX structure contains extended information about
the joystick position, point-of-view position, and button state.
+ /// </summary>
+ /// <remarks>
+ /// <para>
+ /// The value of the dwSize member is also used to identify
the version number for the structure when it's passed to the <see
cref="joyGetPosEx"/> function.
+ /// </para>
+ /// <para>
+ /// Most devices with a point-of-view control have only five
positions. When the JOY_RETURNPOV flag is set, these positions are reported by
using the following constants:
+ /// </para>
+ /// <para>
+ /// <see cref="JOY_POVBACKWARD"/> - Point-of-view hat is
pressed backward. The value 18,000 represents an orientation of 180.00 degrees
(to the rear).
+ /// <see cref="JOY_POVCENTERED"/> - Point-of-view hat is in
the neutral position. The value -1 means the point-of-view hat has no angle to
report.
+ /// <see cref="JOY_POVFORWARD"/> - Point-of-view hat is
pressed forward. The value 0 represents an orientation of 0.00 degrees
(straight ahead).
+ /// <see cref="JOY_POVLEFT"/> - Point-of-view hat is being
pressed to the left. The value 27,000 represents an orientation of 270.00
degrees (90.00 degrees to the left).
+ /// <see cref="JOY_POVRIGHT"/> - Point-of-view hat is pressed
to the right. The value 9,000 represents an orientation of 90.00 degrees (to
the right).
+ /// </para>
+ /// <para>
+ /// The default joystick driver currently supports these five
discrete directions. If an application can accept only the defined
point-of-view values, it must use the JOY_RETURNPOV flag. If an application can
accept other degree readings, it should use the JOY_RETURNPOVCTS flag to obtain
continuous data if it is available. The JOY_RETURNPOVCTS flag also supports the
JOY_POV constants used with the JOY_RETURNPOV flag.
+ /// </para>
+ /// </remarks>
+ /// <seealso cref="joyGetPosEx"/>
+ [StructLayout(LayoutKind.Sequential)]
+ public struct JOYINFOEX
+ {
+ /// <summary>
+ /// Size, in bytes, of this structure.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwSize;
+ /// <summary>
+ /// Flags indicating the valid information returned in this
structure. Members that do not contain valid information are set to zero.
+ /// </summary>
+ /// <remarks>
+ /// <para>
+ /// <see cref="JOY_RETURNALL"/> - Equivalent to setting all of
the JOY_RETURN bits except JOY_RETURNRAWDATA.
+ /// <see cref="JOY_RETURNBUTTONS"/> - The dwButtons member
contains valid information about the state of each joystick button.
+ /// <see cref="JOY_RETURNCENTERED"/> - Centers the joystick
neutral position to the middle value of each axis of movement.
+ /// <see cref="JOY_RETURNPOV"/> - The dwPOV member contains
valid information about the point-of-view control, expressed in discrete units.
+ /// <see cref="JOY_RETURNPOVCTS"/> - The dwPOV member contains
valid information about the point-of-view control expressed in continuous,
one-hundredth degree units.
+ /// <see cref="JOY_RETURNR"/> - The dwRpos member contains
valid rudder pedal data. This information represents another (fourth) axis.
+ /// <see cref="JOY_RETURNRAWDATA"/> - Data stored in this
structure is uncalibrated joystick readings.
+ /// <see cref="JOY_RETURNU"/> - The dwUpos member contains
valid data for a fifth axis of the joystick, if such an axis is available, or
returns zero otherwise.
+ /// <see cref="JOY_RETURNV"/> - The dwVpos member contains
valid data for a sixth axis of the joystick, if such an axis is available, or
returns zero otherwise.
+ /// <see cref="JOY_RETURNX"/> - The dwXpos member contains
valid data for the x-coordinate of the joystick.
+ /// <see cref="JOY_RETURNY"/> - The dwYpos member contains
valid data for the y-coordinate of the joystick.
+ /// <see cref="JOY_RETURNZ"/> - The dwZpos member contains
valid data for the z-coordinate of the joystick.
+ /// <see cref="JOY_USEDEADZONE"/> - Expands the range for the
neutral position of the joystick and calls this range the dead zone. The
joystick driver returns a constant value for all positions in the dead zone.
+ /// </para>
+ /// <para>
+ /// The following flags provide data to calibrate a joystick
and are intended for custom calibration applications.
+ /// </para>
+ /// <para>
+ /// <see cref="JOY_CAL_READ3"/> - Read the x-, y-, and
z-coordinates and store the raw values in dwXpos, dwYpos, and dwZpos.
+ /// <see cref="JOY_CAL_READ4"/> - Read the rudder information
and the x-, y-, and z-coordinates and store the raw values in dwXpos, dwYpos,
dwZpos, and dwRpos.
+ /// <see cref="JOY_CAL_READ5"/> - Read the rudder information
and the x-, y-, z-, and u-coordinates and store the raw values in dwXpos,
dwYpos, dwZpos, dwRpos, and dwUpos.
+ /// <see cref="JOY_CAL_READ6"/> - Read the raw v-axis data if
a joystick mini driver is present that will provide the data. Returns zero
otherwise.
+ /// <see cref="JOY_CAL_READALWAYS"/> - Read the joystick port
even if the driver does not detect a device.
+ /// <see cref="JOY_CAL_READRONLY"/> - Read the rudder
information if a joystick mini-driver is present that will provide the data and
store the raw value in dwRpos. Return zero otherwise.
+ /// <see cref="JOY_CAL_READXONLY"/> - Read the x-coordinate
and store the raw (uncalibrated) value in dwXpos.
+ /// <see cref="JOY_CAL_READXYONLY"/> - Reads the x- and
y-coordinates and place the raw values in dwXpos and dwYpos.
+ /// <see cref="JOY_CAL_READYONLY"/> - Reads the y-coordinate
and store the raw value in dwYpos.
+ /// <see cref="JOY_CAL_READZONLY"/> - Read the z-coordinate
and store the raw value in dwZpos.
+ /// <see cref="JOY_CAL_READUONLY"/> - Read the u-coordinate if
a joystick mini-driver is present that will provide the data and store the raw
value in dwUpos. Return zero otherwise.
+ /// <see cref="JOY_CAL_READVONLY"/> - Read the v-coordinate if
a joystick mini-driver is present that will provide the data and store the raw
value in dwVpos. Return zero otherwise.
+ /// </para>
+ /// </remarks>
+ [CLSCompliant(false)]
+ public uint dwFlags;
+ /// <summary>
+ /// Current X-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwXpos;
+ /// <summary>
+ /// Current Y-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwYpos;
+ /// <summary>
+ /// Current Z-coordinate.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwZpos;
+ /// <summary>
+ /// Current position of the rudder or fourth joystick axis.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwRpos;
+ /// <summary>
+ /// Current fifth axis position.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwUpos;
+ /// <summary>
+ /// Current sixth axis position.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwVpos;
+ /// <summary>
+ /// Current state of the 32 joystick buttons. The value of this
member can be set to any combination of JOY_BUTTONn flags, where n is a value
in the range of 1 through 32 corresponding to the button that is pressed.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwButtons;
+ /// <summary>
+ /// Current button number that is pressed.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwButtonNumber;
+ /// <summary>
+ /// Current position of the point-of-view control. Values for this
member are in the range 0 through 35,900. These values represent the angle, in
degrees, of each view multiplied by 100.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwPOV;
+ /// <summary>
+ /// Reserved; do not use.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwReserved1;
+ /// <summary>
+ /// Reserved; do not use.
+ /// </summary>
+ [CLSCompliant(false)]
+ public uint dwReserved2;
+ }
+ #endregion JOYINFOEX
+
// --- Public Externs ---
#region Boolean PlaySound(String sound, IntPtr mod, Int32 soundFlags)
/// <summary>
@@ -525,5 +1271,255 @@
[DllImport(WINMM_NATIVE_LIBRARY,
CallingConvention=CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
public static extern Int32 timeGetTime();
#endregion Int32 timeGetTime()
+
+ #region Int32 joyConfigChanged(ulong dwFlags)
+ /// <summary>
+ /// The joyConfigChanged function informs the joystick driver that
the configuration has changed and should be reloaded from the registry.
+ /// </summary>
+ /// <param name="dwFlags">
+ /// Reserved for future use. Must equal zero.
+ /// </param>
+ /// <returns>
+ /// Returns JOYERR_NOERROR if successful. Returns JOYERR_PARMS if
the parameter is non-zero.
+ /// </returns>
+ /// <remarks>
+ /// <para>
+ /// This function causes a window message to be sent to all
top-level windows. This message may be defined by applications that need to
respond to changes in joystick calibration by using RegisterWindowMessage with
the following message ID:
+ /// </para>
+ /// <code>
+ /// #define JOY_CONFIGCHANGED_MSGSTRING
"MSJSTICK_VJOYD_MSGSTR"
+ /// </code>
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyConfigChanged(ulong dwFlags);
+ #endregion Int32 joyConfigChanged(ulong dwFlags)
+
+ #region Int32 joyGetDevCaps(UIntPtr uJoyID, ref JOYCAPS pjc, uint cbjc)
+ /// <summary>
+ /// The joyGetDevCaps function queries a joystick to determine its
capabilities.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick to be queried. Valid values for
uJoyID range from -1 to 15. A value of -1 enables retrieval of the szRegKey
member of the JOYCAPS structure whether a device is present or not. For Windows
NT 4.0, valid values are limited to zero (JOYSTICKID1) and JOYSTICKID2.
+ /// </param>
+ /// <param name="pjc">
+ /// Pointer to a <see cref="JOYCAPS"/> structure to contain the
capabilities of the joystick.
+ /// </param>
+ /// <param name="cbjc">
+ /// Size, in bytes, of the JOYCAPS structure.
+ /// </param>
+ /// <returns>
+ /// <para>
+ /// Returns JOYERR_NOERROR if successful or one of the
following error values:
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present. Windows NT/2000/XP: The specified joystick identifier is invalid.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - An invalid parameter
was passed. Windows 95/98/Me: The specified joystick identifier is invalid.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// <para>
+ /// Use the <see cref="joyGetNumDevs"/> function to determine
the number of joystick devices supported by the driver.
+ /// </para>
+ /// <para>
+ /// Windows NT/2000/XP: This method fails when passed an
invalid value for the cbjc parameter.
+ /// Windows 95/98/Me: This method succeeds when passed an
invalid value for the cbjc parameter.
+ /// </para>
+ /// </remarks>
+ /// <seealso cref="JOYCAPS"/>
+ /// <seealso cref="joyGetNumDevs"/>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyGetDevCaps(UIntPtr uJoyID, ref JOYCAPS
pjc, uint cbjc);
+ #endregion Int32 joyGetDevCaps(UIntPtr uJoyID, ref JOYCAPS pjc, uint
cbjc)
+
+ #region Int32 joyGetNumDevs()
+ /// <summary>
+ /// The joyGetNumDevs function queries the joystick driver for the
number of joysticks it supports.
+ /// </summary>
+ /// <returns>
+ /// The joyGetNumDevs function returns the number of joysticks
supported by the current driver or zero if no driver is installed.
+ /// </returns>
+ /// <remarks>
+ /// <para>
+ /// Use the <see cref="joyGetPos"/> function to determine
whether a given joystick is physically attached to the system. If the specified
joystick is not connected, joyGetPos returns a <see cref="JOYERR_UNPLUGGED"/>
error value.
+ /// </para>
+ /// </remarks>
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyGetNumDevs();
+ #endregion Int32 joyGetNumDevs()
+
+ #region Int32 joyGetPos(uint uJoyID, ref JOYINFO pji)
+ /// <summary>
+ /// The joyGetPos function queries a joystick for its position and
button status.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick to be queried. Valid values for
uJoyID range from zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT
4.0. For Windows NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/>
and <see cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <param name="pji">
+ /// Pointer to a <see cref="JOYINFO"/> structure that contains the
position and button status of the joystick.
+ /// </param>
+ /// <returns>
+ /// Returns <see cref="JOYERR_NOERROR"/> if successful or one of
the following error values.
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - An invalid parameter
was passed.
+ /// <see cref="JOYERR_UNPLUGGED"/> - The specified joystick is
not connected to the system.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// For devices that have four to six axes of movement, a
point-of-view control, or more than four buttons, use the <see
cref="joyGetPosEx"/> function.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyGetPos(uint uJoyID, ref JOYINFO pji);
+ #endregion Int32 joyGetPos(uint uJoyID, ref JOYINFO pji)
+
+ #region Int32 joyGetPosEx(uint uJoyID, ref JOYINFOEX pji)
+ /// <summary>
+ /// The joyGetPosEx function queries a joystick for its position
and button status.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick to be queried. Valid values for
uJoyID range from zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT
4.0. For Windows NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/>
and <see cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <param name="pji">
+ /// Pointer to a <see cref="JOYINFOEX"/> structure that contains
extended position information and button status of the joystick. You must set
the dwSize and dwFlags members or joyGetPosEx will fail. The information
returned from joyGetPosEx depends on the flags you specify in dwFlags.
+ /// </param>
+ /// <returns>
+ /// Returns JOYERR_NOERROR if successful or one of the following
error values.
+ /// <para>
+ /// Returns JOYERR_NOERROR if successful or one of the
following error values.
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - An invalid parameter
was passed. Windows 95/98/Me: The specified joystick identifier is invalid.
+ /// <see cref="MMSYSERR_BADDEVICEID"/> - Windows 95/98/Me: The
specified joystick identifier is invalid.
+ /// <see cref="JOYERR_UNPLUGGED"/> - The specified joystick is
not connected to the system.
+ /// <see cref="JOYERR_PARMS"/> - Windows NT/2000/XP: The
specified joystick identifier is invalid.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// This function provides access to extended devices such as
rudder pedals, point-of-view hats, devices with a large number of buttons, and
coordinate systems using up to six axes. For joystick devices that use three
axes or fewer and have fewer than four buttons, use the joyGetPos function.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyGetPosEx(uint uJoyID, ref JOYINFOEX pji);
+ #endregion Int32 joyGetPosEx(uint uJoyID, ref JOYINFOEX pji)
+
+ #region Int32 joyGetThreshold(uint uJoyID, UIntPtr puThreshold)
+ /// <summary>
+ /// The joyGetThreshold function queries a joystick for its
current movement threshold.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick. Valid values for uJoyID range from
zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT 4.0. For Windows
NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/> and <see
cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <param name="puThreshold">
+ /// Pointer to a variable that contains the movement threshold
value.
+ /// </param>
+ /// <returns>
+ /// <para>
+ /// Returns JOYERR_NOERROR if successful or one of the
following error values.
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - An invalid parameter
was passed.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// The movement threshold is the distance the joystick must be
moved before a joystick position-change message (<see cref="MM_JOY1MOVE"/>,
<see cref="MM_JOY1ZMOVE"/>, <see cref="MM_JOY2MOVE"/>, or <see
cref="MM_JOY2ZMOVE"/>) is sent to a window that has captured the device. The
threshold is initially zero.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyGetThreshold(uint uJoyID, UIntPtr
puThreshold);
+ #endregion Int32 joyGetThreshold(uint uJoyID, UIntPtr puThreshold)
+
+ #region Int32 joyReleaseCapture(uint uJoyID)
+ /// <summary>
+ /// The joyReleaseCapture function releases the specified captured
joystick.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick. Valid values for uJoyID range from
zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT 4.0. For Windows
NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/> and <see
cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <returns>
+ /// <para>
+ /// Returns <see cref="JOYERR_NOERROR"/> if successful or one
of the following error values.
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - Windows 95/98/Me: The
specified joystick device identifier uJoyID is invalid. Windows NT/2000/XP: The
specified joystick identifier is valid, but the joystick has not been captured.
+ /// <see cref="JOYERR_PARMS"/> - Windows NT/2000/XP: The
specified joystick device identifier uJoyID is invalid.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// Windows 95/98/Me: This method returns JOYERR_NOERROR when
passed a valid joystick identifier that has not been captured.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joyReleaseCapture(uint uJoyID);
+ #endregion Int32 joyReleaseCapture(uint uJoyID)
+
+ #region Int32 joySetCapture(int hwnd, uint uJoyID, uint uPeriod, bool
fChanged)
+ /// <summary>
+ /// The joySetCature function captures a joystick by causing its
messages to be sent to the specified window.
+ /// </summary>
+ /// <param name="hwnd">
+ /// Handle to the window to receive the joystick messages.
+ /// </param>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick. Valid values for uJoyID range from
zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT 4.0. For Windows
NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/> and <see
cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <param name="uPeriod">
+ /// Polling frequency, in milliseconds.
+ /// </param>
+ /// <param name="fChanged">
+ /// Change position flag. Specify TRUE for this parameter to send
messages only when the position changes by a value greater than the joystick
movement threshold. Otherwise, messages are sent at the polling frequency
specified in uPeriod.
+ /// </param>
+ /// <returns>
+ /// <para>
+ /// Returns JOYERR_NOERROR if successful or one of the
following error values.
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="MMSYSERR_INVALPARAM"/> - Windows 95/98/Me:
Invalid joystick ID or hwnd is NULL.
+ /// <see cref="JOYERR_NOCANDO"/> - Cannot capture joystick
input because a required service (such as a Windows timer) is unavailable.
+ /// <see cref="JOYERR_UNPLUGGED"/> - The specified joystick is
not connected to the system.
+ /// <see cref="JOYERR_PARMS"/> - Windows NT/2000/XP: Invalid
joystick ID or hwnd is NULL.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// This function fails if the specified joystick is currently
captured. Call the joyReleaseCapture function to release the captured joystick,
or destroy the window to release the joystick automatically.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joySetCapture(int hwnd, uint uJoyID, uint
uPeriod, bool fChanged);
+ #endregion Int32 joySetCapture(int hwnd, uint uJoyID, uint uPeriod,
bool fChanged)
+
+ #region Int32 joySetThreshold(uint uJoyID, uint uThreshold)
+ /// <summary>
+ /// The joySetThreshold function sets the movement threshold of a
joystick.
+ /// </summary>
+ /// <param name="uJoyID">
+ /// Identifier of the joystick. Valid values for uJoyID range from
zero (<see cref="JOYSTICKID1"/>) to 15, except for Windows NT 4.0. For Windows
NT 4.0, valid values are limited to <see cref="JOYSTICKID1"/> and <see
cref="JOYSTICKID2"/>.
+ /// </param>
+ /// <param name="uThreshold">
+ /// New movement threshold.
+ /// </param>
+ /// <returns>
+ /// <para>
+ /// Returns JOYERR_NOERROR if successful or one of the
following error values.
+ /// </para>
+ /// <para>
+ /// <see cref="MMSYSERR_NODRIVER"/> - The joystick driver is
not present.
+ /// <see cref="JOYERR_PARMS"/> - The specified joystick device
identifier uJoyID is invalid.
+ /// </para>
+ /// </returns>
+ /// <remarks>
+ /// The movement threshold is the distance the joystick must be
moved before a joystick position-change message (<see cref="MM_JOY1MOVE"/>,
<see cref="MM_JOY1ZMOVE"/>, <see cref="MM_JOY2MOVE"/>, or <see
cref="MM_JOY2ZMOVE"/>) is sent to a window that has captured the device. The
threshold is initially zero.
+ /// </remarks>
+ [CLSCompliant(false)]
+ [DllImport(WINMM_NATIVE_LIBRARY, CallingConvention =
CALLING_CONVENTION), SuppressUnmanagedCodeSecurity]
+ public static extern Int32 joySetThreshold(uint uJoyID, uint
uThreshold);
+ #endregion Int32 joySetThreshold(uint uJoyID, uint uThreshold)
+
}
-}
+}
\ No newline at end of file
_______________________________________________
Mono-patches maillist - Mono-patches@lists.ximian.com
http://lists.ximian.com/mailman/listinfo/mono-patches
