Thanks for the feedback. I will try and get some support from the ivtv group. I just wanted to make sure it wasn't something silly, like not loading a needed driver or needing to tell the tuner the input is "cable", rather than NTSC.
> ...or you'll have to tell your card to switch to the Tuner0 input to use > the tuner. > > -JAC I didn't realize there was a composite input. I'm trying to use the coax input. ptune-ui.pli is set to tuner 0, though I've played with other selections. That, at least, does seem to work. > > I have the same problem with my M179's; your question is better suited > > for the ivtv mailing list. The last known-good version of ivtv (for > > me) > > for the M179 is pre-100b, which was a long, long time ago. > > FWIW, I'm running 0.2.0-rc3b with 2 M-179's with good results. > Thanks. I'll try that version, and see what the ivtv group suggests. This may pose a real problem. My plan is to use a PVR250 (which I haven't installed yet) and the m179, and an hdtv card. If I need and old version of ivtv for the m179, can I use a later version for the PVR250? I don't know how that would work. Maybe I'll need to move one of the cards to a frontend machine. But, first things first. Get the m179 working. Thanks again. - Bob _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users