Ahh a
quick google showed me that I need to run on CVS for this issue to be
repaired.
Thanks!
Daniel
From: Daniel Jimenez Sent: Friday, November 25, 2005 12:48 PM To: Ayotunde Itayemi; nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] nrpe ver. 2 on AIX 5.2 I'm trying to compile the Nagios plugins. I get the
following on both the stable and the alpha versions during
make:
Making all in
plugins
if gcc -DLOCALEDIR=\"/usr/local/nagios/share/locale\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../lib -I../intl -g -O2 -MT check_disk.o -MD -MP -MF ".deps/check_disk.Tpo" -c -o check_disk.o `test -f 'check_disk.c' || echo './'`check_disk.c; then mv -f ".deps/check_disk.Tpo" ".deps/check_disk.Po"; else rm -f ".deps/check_disk.Tpo"; exit 1; fi if gcc -DLOCALEDIR=\"/usr/local/nagios/share/locale\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../lib -I../intl -g -O2 -MT utils.o -MD -MP -MF ".deps/utils.Tpo" -c -o utils.o `test -f 'utils.c' || echo './'`utils.c; then mv -f ".deps/utils.Tpo" ".deps/utils.Po"; else rm -f ".deps/utils.Tpo"; exit 1; fi if gcc -DLOCALEDIR=\"/usr/local/nagios/share/locale\" -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../lib -I../intl -g -O2 -MT popen.o -MD -MP -MF ".deps/popen.Tpo" -c -o popen.o `test -f 'popen.c' || echo './'`popen.c; then mv -f ".deps/popen.Tpo" ".deps/popen.Po"; else rm -f ".deps/popen.Tpo"; exit 1; fi gcc -g -O2 -L. -o check_disk check_disk.o utils.o ../lib/libnagiosplug.a popen.o ../intl/libintl.a -liconv ld: 0711-317 ERROR: Undefined symbol: .VA_COPY ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. collect2: ld returned 8 exit status make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 2. Stop. Any ideas?
Thanks,
Daniel From: Ayotunde Itayemi [mailto:[EMAIL PROTECTED] Sent: Friday, November 04, 2005 2:40 PM To: Rudy Montemayor; nagios-users@lists.sourceforge.net Subject: RE: [Nagios-users] nrpe ver. 2 on AIX 5.2 Hi, Did you compile it
yourself? I was getting the same
message yesterday and for the life of me I can’t remember how I solved
it. But let me just take
you through my compile Running as user/group
nagios/nagios I installed under
/nagios but you can modify to suit yourself installing NRPE and
nagios plugin (without ssl) extract nrpe archive
nrpe-2.0b4.tar.gz gunzip
nrpe-2.0b4.tar.gz tar -xvf
nrpe-2.0b4.tar cd
nrpe-2.0b4 install NRPE
by: ./configure
--enable-command-args --disable-ssl make
all mkdir -p
/nagios/sbin cp src/nrpe
src/check_nrpe /nagios/sbin mkdir -p
/nagios/etc cp -p nrpe.cfg
/nagios/etc/ edit nrpe.cfg as
required Installing NAGIOS
plugins ------------------------------------- Unarchive
nagios-plugins-HEAD-200510261647.tar.gz gunzip
nagios-plugins-HEAD-200510261647.tar.gz tar -xvf
nagios-plugins-HEAD-200510261647.tar cd
nagios-plugins-HEAD-200510261647 ./configure
--without-ssl make copy all executables to
your preferred directory e.g., /nagios/libexec cd
plugins find ./ -type f –perm
644 -exec cp {} /nagios/libexec \; start nrpe with command
similar to /nagios/sbin/nrpe -d -c
/nagios/etc/nrpe.cfg You may have to edit
nrpe.cfg especially if running it standalone allowed_hosts=127.0.0.1,ip-address-of-other-hosts-that-will-talk-to-nrpe Sample commands that
you may put in your nrpe.cfg to test with command[check_disk1]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd4 command[check_disk2]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd2 command[check_disk3]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd9var command[check_disk4]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd3 command[check_disk5]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd1 command[check_disk6]=/nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd10opt command[check_users]=/nagios/libexec/check_users
-w 5 -c 10 command[check_load]=/nagios/libexec/check_load
-w 15,10,5 -c 30,25,20 command[check_zombie_procs]=/nagios/libexec/check_procs
-w 5 -c 10 -s Z command[check_total_procs]=/nagios/libexec/check_procs
-w 150 -c 200 (remember to restart
nrpe if you edit its config file) Test from the command
line after starting nrpe (you should get replies): /nagios/libexec/check_disk
-w 20 -c 10 -p /dev/hd4 /nagios/libexec/check_load
-w 15,10,5 -c 30,25,20 Let me know if there
are any issues. Wrote all these in a hurry :-) From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Rudy Montemayor Hi, I have Nagios and nrpe
running on both HP and Sun systems; however I can not get the nrpe daemon on AIX
to work at all. Here is a little info on what I’m
using: AIX oslevel
5.2.0.0 NRPE Version:
2.0b5 On AIX
system: netstat -a | grep
5666 tcp4
0 0
*.5666
*.*
LISTEN When I try the check_nrpe from my HP system where I have
Nagios running to the AIX system I get the
following: CHECK_NRPE: Received 0 bytes from daemon. Check
the remote server logs for error messages. I have nrpe ruuning as a standalone daemon on the AIX
system: ps -ef | grep nrpe www
258078 1 0
10:39:44 - 0:00
/usr/local/nagios/nrpe-2.0/bin/nrpe.old -c /usr/local/nagios/nrpe-2.0/nrpe.cfg
–d Any help to get this going would be appreciated.
Thanks. Rudy Montemayor |
- RE: [Nagios-users] nrpe ver. 2 on AIX 5.2 Daniel Jimenez
- RE: [Nagios-users] nrpe ver. 2 on AIX 5.2 Daniel Jimenez